According to the reports of not-for-profit organisation Gun Violence Archive, the year 2018 has seen 323 mass shooting incidents as of November 28 in the United States. This number is 346 for the year 2017 and 382 for 2016 (more statistics are available here), with “mass shooting” defined as cases where four or more people are shot or killed in the same time period and location.

While definitions of mass shooting vary with organisations in the US, the count of over 300 incidents per year, or about once per day on average, is simply alarming. It raises public safety concerns, ignites debates and protests, which in turn lead to public unrest and potentially more violence, and increases costs for governments from the regional to federal level. Most importantly, the loss of lives demands not only improvement in post-incident handling and investigation, but also new prevention technologies.

Gunshot detection solutions

AI weapon detection offers a more efficient alternative to prevent active shooting

There are several gunshot detection solutions in the security market, commonly used by law enforcement agencies to detect and locate gun fires. These systems function based on acoustic recordings and analyses and often in combination with signals detected by sensors of the optical flash and shockwave when a gun is fired. However, gunshot detection by nature dictates that the law enforcement can only react to a shooting incident that has occurred. With fast action, law enforcement can prevent the incident from escalating, but lives that are lost cannot be recovered.

With the development of artificial intelligence in object recognition, AI weapon detection offers a more efficient alternative to prevent active shooting: AI can visually detect guns based on their shapes before they are fired. The AI is trained to recognise firearms in different shapes, sizes, colours, and at different angles in videos, so that the AI weapon detector can be deployed with existing cameras systems, analyse the video feeds, and instantly notify security staff when a gun is spotted.

Comparison of the advantages for law enforcement and public security agencies

Legacy gunshot detection using sensors

AI weapon detection

Reactive measure: detect after guns have been fired

Proactive measure: detect before guns are fired

Time to action: within 1 second

Time to action: within 1 second

Unable to provide visual data about shooter(s)

Can provide data about shooter(s) based on the camera recording: clothing, luggage (backpack, handbag, etc.), facial features, vehicle

Unable to track the location of the shooter(s) before and after shooting because of the lack of sound

Can track the shooter(s) using AI Person & Vehicle Tracking, AI Face Recognition, and AI License Plate Recognition

False detection caused by similar sound such as fireworks and cars backfiring

Minimal to no false detection, as AI can distinguish different types of handguns and rifles from normal objects (umbrella, cellphone, etc.)

Require physical deployment of gunshot detection sensors

Can be used with existing camera systems, do not require special hardware

Complicated to deploy, require highly trained professional

Easy to deploy as an add-on to existing video surveillance system

-

Can integrate with gun-shot detection to create a “double knock” audio and video active shooter alert system

Gun-shot detection advantages

In addition to advantages for law enforcement and public security agencies, this type of visual-based pre-incident detector has three-fold advantages for the public:

  • Save lives by spotting the shooter before the shooting event.
  • Minimise the chaos entailing an incident: panic and chaos caused by a shooting incident often adds to injury, as people run, fall, trample on others… With an AI weapon detector, when a gun is spotted, the system sends an alert to security staff, who can quickly control the situation in an organised manner and apprehend the intending shooter.
  • Can be added as a SaaS (Security as a Service) component to small business and home surveillance systems, e.g., intrusion detection alerts (home invasion incidents with firearms number over 2500 per year nationwide).

For a complete active shooter detection system, video-based AI detector can operate in conjunction with gunshot detectors for enhanced security. Traditional X-ray based weapon detection or metal detection entrance systems are complicated and expensive; with AI video technology, active shooter detection system can be cost-effective, and after all, what price tag can one put on a life?

Written by Paul Sun and Mai Truong, IronYun

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

What is the impact of lighting on video performance?
What is the impact of lighting on video performance?

Dark video images contain little or no information about the subject being surveilled. Absence of light can make it difficult to see a face, or to distinguish the color of clothing or of an automobile. Adding light to a scene is one solution, but there are also new technologies that empower modern video cameras to see better in any light. We asked this week’s Expert Panel Roundtable: what impact does lighting have on the performance of video systems?

Alarm.com adapts during pandemic to enable partners to ‘succeed remotely’
Alarm.com adapts during pandemic to enable partners to ‘succeed remotely’

As a cloud-based platform for service providers in the security, smart home and smart business markets, Alarm.com has adapted quickly to changing conditions during the coronavirus pandemic. In the recent dynamic environment, Alarm.com has kept focus on supporting their service provider partners so they can keep local communities protected. “We moved quickly to establish work-from-home protocols to protect our employees and minimise impact on our partners,” says Anne Ferguson, VP of Marketing at Alarm.com. The Customer Operations and Reseller Education (CORE) team has operated without interruption to provide support to partners. Sales teams are utilising webinars and training resources to inform and educate partners about the latest products, tools, and solutions. Alarm.com’s partner tools are essential for remote installations and support of partner accounts. Helping customers remain connected Adapting to challenges of the coronavirus pandemic, Alarm.com is further investing in solutions that help customers remain connected and engaged. The company has created a resource hub called “Succeeding Remotely” that provides tools, tips and news links that partners can use to adapt their business operations. From adjusting sales and installation techniques to maintaining cellular upgrades, Alarm.com is helping partners stay connected to customers remotely, keep their teams trained, and address rapidly evolving customer concerns without rolling trucks.The company has created a resource hub called “Succeeding Remotely “Additionally, after seeing all that our partners are doing to support their local communities in need, we were compelled to highlight those efforts with ongoing videos called Good Connections, which we’re sharing with our partner community to spark more ideas and ways to help,” says Ferguson. “Though our partners have experienced varying degrees of disruption to their business, we’re inspired by their adaptability, ingenuity and resilience,” says Ferguson. “Along with establishing proper safeguards for operating in homes and businesses, our partners are leveraging our support resources more heavily, while our entire staff has worked tirelessly to deliver new, timely resources.” Do-It-Together solutions Alarm.com partners are successfully employing Do-It-Together (DIT) solutions, focusing on 3G-to-LTE upgrades, and pivoting to new verticals like commercial and wellness. Many are also streamlining their business operations and taking advantage of virtual training opportunities to enhance their technicians’ skills and knowledge, says Ferguson. Do-It-Together installs involve depending on customers to perform part or all of the installation process. Partners can send customers fully configured kits with mounting instructions, or technicians may guide customers on a remote video call. Alarm.com’s tools, training and products help partners modify remote installation options depending on each customer’s needs. End users can validate the Alarm.com Smart Gateway with their central station that sensors they have mounted were done correctly using the Alarm.com mobile app Alarm.com Smart Gateway For example, the Alarm.com Smart Gateway can be pre-configured with indoor and outdoor cameras for easy customer installation and to reduce the likelihood of future service calls. Also, end users can validate with their central station that sensors they have mounted were done correctly using the Alarm.com mobile app. “DIT is helping our partners continue onboarding customers and avoid backlogs,” says Ferguson. “We’ve been pleasantly surprised by the resiliency and level of future investment that our residential and commercial partners have shown in the face of adversity,” adds Ferguson. For example, a significant number of business customers have used the slow period to install systems that are typically too disruptive to put in during normal business hours. Similarly, service providers are adopting new technologies or business models, such as cloud-based access control. “They’re often saying to us, ‘I’m going to take this opportunity to make changes to improve our business,’ and have been working closely with us on training and business consulting to support their efforts,“ she says. Shift to the cloud Ferguson sees a growing preference for cloud-managed surveillance and access systems over ones that have historically been run on-premise. The technology itself is attractive, but especially driving change is the enhancement to the daily lives of service providers and customers, which have been strained during this time. “The foundational benefit of our cloud-based solution is the hassle-free, seamless customer experience it delivers,” says Ferguson. “We make this possible by taking ownership of the servers, software maintenance, firmware updates, health monitoring, and more. With cloud technology, these aspects become invisible to the customer and take a lot off their plate, which is more important than ever.” End users can take advantage of Smart Tip video tutorials to help with DIT installations, or they can use the Alarm.com Wellcam to connect with loved ones anywhere.End users can take advantage of Smart Tip video tutorials to help with DIT installations Partners can attend training workshops focused on remote installation tactics, while driving consumer interest in new offerings through Alarm.com’s Customer Connections platform. The goal is to make it simple for partners to stay connected to their customers to maximise lifetime account value. “We are well-positioned to endure the pandemic because of the strength of our partners in their markets along with our investments in technology, hardware and our team,” says Ferguson. “As restrictions slowly lift, there is cautious optimism that the residential, commercial, property management, plumbing/HVAC, builder and other verticals will recover quickly. We believe that as more partners adopt the DIT model and add commercial and wellness RMR, they will find increasing opportunities to deploy security, automation, video, video analytics, access and more throughout their customer base.”

COVID-19 worries boost prospects of touchless biometric systems
COVID-19 worries boost prospects of touchless biometric systems

Spread of the novel coronavirus has jolted awareness of hygiene as it relates to touching surfaces such as keypads. No longer in favour are contact-based modalities including use of personal identification numbers (PINs) and keypads, and the shift has been sudden and long-term. Both customers and manufacturers were taken by surprise by this aspect of the virus’s impact and are therefore scrambling for solutions. Immediate impact of the change includes suspension of time and attendance systems that are touch-based. Some two-factor authentication systems are being downgraded to RFID-only, abandoning the keypad and/or biometric components that contributed to higher security, but are now unacceptable because they involve touching. Touchless biometric systems in demand The trend has translated into a sharp decline in purchase of touch modality and a sharp increase in the demand for touchless systems, says Alex Zarrabi, President of Touchless Biometrics Systems (TBS). Biometrics solutions are being affected unequally, depending on whether they involve touch sensing, he says. Spread of the novel coronavirus has jolted awareness of hygiene as it relates to touching surfaces such as keypads “Users do not want to touch anything anymore,” says Zarrabi. “From our company’s experience, we see it as a huge catalyst for touchless suppliers. We have projects being accelerated for touchless demand and have closed a number of large contracts very fast. I’m sure it’s true for anyone who is supplying touchless solutions.” Biometric systems are also seeing the addition of thermal sensors to measure body temperature in addition to the other sensors driving the system. Fingerscans and hybrid face systems TBS offers 2D and 3D systems, including both fingerscans and hybrid face/iris systems to provide touchless identification at access control points. Contactless and hygienic, the 2D Eye system is a hybrid system that combines the convenience of facial technology with the higher security of iris recognition. The system recognises the face and then detects the iris from the face image and zeros in to scan the iris. The user experiences the system as any other face recognition system. The facial aspect quickens the process, and the iris scan heightens accuracy. TBS also offers the 2D Eye Thermo system that combines face, iris and temperature measurement using a thermal sensor module. TBS's 2D Eye Thermo system combines face, iris and temperature measurement using a thermal sensor module Another TBS system is a 3D Touchless Fingerscan system that provides accuracy and tolerance, anti-spoofing, and is resilient to water, oil, dust and dirt. The 2D+ Multispectral for fingerprints combines 2D sensing with “multispectral” subsurface identification, which is resilient to contaminants and can read fingerprints that are oily, wet, dry or damaged – or even through a latex glove. In addition, the 3D+ system by TBS provides frictionless, no-contact readings even for people going through the system in a queue. The system fills the market gap for consent-based true on-the-fly systems, says Zarrabi. The system captures properties of the hand and has applications in the COVID environment, he says. The higher accuracy and security ratings are suitable for critical infrastructure applications, and there is no contact; the system is fully hygienic. Integration with access control systems Integration of TBS biometrics with a variety of third-party access control systems is easy. A “middleware” subsystem is connected to the network. Readers are connected to the subsystem and also to the corporate access control system. An interface with the TBS subsystem coordinates with the access control system. For example, a thermal camera used as part of the biometric reader can override the green light of the access control system if a high temperature (suggesting COVID-19 infection, for example) is detected. The enrollment process is convenient and flexible and can occur at an enrollment station or at an administration desk. Remote enrollment can also be accomplished using images from a CCTV camera. All templates are encrypted. Remotely enrolled employees can have access to any location they need within minutes. The 3D+ system by TBS provides frictionless, no-contact readings even for people going through the system in a queue Although there are other touchless technologies available, they cannot effectively replace biometrics, says Zarrabi. For example, a centrally managed system that uses a Bluetooth signal from a smart phone could provide convenience, is “touchless,” and could suffice for some sites. However, the system only confirms the presence and “identity” of a smart phone – not the person who should be carrying it. “There has been a lot of curiosity about touchless, but this change is strong, and there is fear of a possible second wave of COVID-19 or a return in two or three years,” says Zarrabi. “We really are seeing customers seriously shifting to touchless.”