GJD CCTV Telemetry Receivers(1)
Browse CCTV Telemetry Receivers
Telemetry receiver products updated recently
End users can add security, safety and business intelligence – while achieving a higher return on investment at their protected facilities – with live streaming video. It can be deployed effectively for IP video, network video recorders (NVRs) and body-worn cameras. The growing use of streaming video is resulting in vast technological developments and high-end software that promotes reduced bandwidth, high scalability and lower total cost of ownership (TCO). Here’s how users can add value to security with live streaming video and what they should look for in the procurement of technology solutions. Questions are answered by Bryan Meissner, Chief Technology Officer and Co-Founder of EvoStream. Q: What is live streaming video and how does it apply to physical security? BM: In its simplest and most popular form, video streaming allows users to watch video on PCs, laptops, tablets and smartphones. According to GO-Globe, every 60 seconds more than 400 hours of video are uploaded and around 700,000 hours watched. The key to effective video streaming is for the platform to be able to adapt to the limits of the internet or network connection so the viewer gets an unbridled experience without buffering or signal loss. Live video streaming in security applications leverages a variety of connected devices, appliances and services including the cloud, mobile platforms, IP cameras and NVRs, becoming an enabling technology for more effective, real-time data capture at the protected premises. It reduces bandwidth costs and infrastructure operating requirements by streaming directly from cameras, mobile devices, drones, body worn units and loT devices to browsers, phones and tablets. The best solutions optimise the experience for the user and permit image capture and retrieval from Android, iOS, browser platforms or directly from cameras or NVRs—streaming to wherever the user desires. Quality live streaming applications provide clear, real-time images and retrieve high-resolution video that can be used for evidence, identification, operations management or compliance regulation and control. The most cost-effective solutions offer minimal hardware requirements, lower overall operating expenses and promote high scalability – even integration with many legacy security management platforms. Q: What are some challenges of live streaming video and how are those being addressed by new technology? BM: Live streaming video can present challenges when a solution isn’t designed specifically for the security infrastructure. End users need to look for forward-thinking software and firmware solutions which offer reduced bandwidth requirements, high scalability and a lower total cost of ownership (TCO) or they will be disappointed with the results and costs of maintaining services for end users. The technology is changing rapidly, so only providers who focus on innovation can keep pace and future-proof the user and their facility. To be most effective, video needs to be able to stream consistently and reliably to and from a host of different devices, platforms, browsers and mediums, on-premises servers or the cloud. Video footage needs to be obtained quickly and deliver critical metadata, with built-in cyber safeguards and hardening such as automatic encryption and authentication. The most competent live video streaming lets users integrate with and run on any platform, appliance or device Q: What do end users need to look for in solutions for effective video streaming? BM: Implementing a live streaming video platform should result in greater efficiency and reduced operational costs. Live video streaming to and from a variety of connected devices, appliances and services requires sub-second latency from image capture to delivery. It also needs to be as open and agnostic as possible – spanning multiple technologies, standards and protocols and giving the user enhanced flexibility for their specification. The most competent live video streaming lets users integrate with and run on any platform, appliance or device including standalone servers, server racks, public, private and hybrid clouds and other distribution channels using the same application programming interface or API. Streaming should also support the latest codecs, such as H.264 and H.265 along with widely specified protocols for the distribution of that video. Q: What are some of the trending technological developments in live streaming video applications? BM: Traditional video streaming consumes exorbitant amounts of bandwidth and users pay for video routed through their servers. Some of the latest capabilities, such as peer-to-peer streaming, HTML5 media players, metadata integration and cost-effective transcoding via RaspberryPi enhance overall processing and ultimately strengthen the user experience. Peer-to-peer is a critical, emerging component in effective video streaming. With peer to peer, video does not go through servers but instead streams directly between the camera and the end-user’s phone, for example, eliminating that cost of bandwidth from the platform while still permitting exact control of content. Users stream live from cameras to any device, with the ability to authenticate and approve peering from the back-end infrastructure while enabling low-latency HTML5 without incurring excessive platform bandwidth costs. The explosion of live streaming video in IP video cameras, NVRs and body-worn cameras is driving a new category of high-end software offering reduced bandwidth, high scalability and lower TCO. It prepares users for new technology and the loT, eliminating the largest cost driver of hosted live streaming platforms – bandwidth. Applications that offer peer-to-peer streaming and other feature sets can help future proof the end-user’s investment and strengthen the value proposition for viewing or retrieving live or archived video effectively.
Everybody has been hooked on the discussions about Analogue HD or IP systems, but shouldn’t we really be thinking about WiFi and 5G connectivity, removing the need for expensive cabling? Are wireless networks secure enough? What is the potential range? Even the basic question about whether or not the network is capable of transferring the huge (and growing) amount of data required for High Res Video, which will soon be quadrupled with the advent of 4K and higher resolutions. The future of video surveillance monitors We have seen a massive uptake in 4K monitors in the security industry. While they have been relatively common in the consumer market, they are only now beginning to really take off in the CCTV market, and the advances in Analogue HD and IP technology mean that 4K is no longer the limited application technology it was just a few years ago. Relatively easy and inexpensive access to huge amounts of storage space, either on physical storage servers or in the cloud, both of which have their own positives and negatives, have really helped with the adoption of 4K. Having said that the consensus seems to be, at least where displays are concerned, there is very little need for any higher resolution. So, where next for monitors in CCTV? 8K monitors are present, but are currently prohibitively expensive, and content is in short supply (although the Japanese want to broadcast the Tokyo Olympics in 8K in 2020). Do we really need 8K and higher displays in the security industry? In my own opinion, not for anything smaller than 100-150+ inches, as the pictures displayed on a 4K resolution monitor are photo realistic without pixilation on anything I’ve seen in that range of sizes. The consensus seems to be, at least where displays are concerned, there is very little need for any higher resolution Yes, users many want ultra-high resolution video recording in order to capture every minute detail, but I feel there is absolutely no practical application for anything more than 4K displays below around 120”, just as I feel there is no practical application for 4K resolution below 24”. The higher resolution camera images can be zoomed in and viewed perfectly well on FHD and 4K monitors. That means there has to be development in other areas. Developments in WiFi and 5G What we have started to see entering the market are Analogue HD and IP RJ45 native input monitors. Whilst you would be forgiven for thinking they are very similar, there are in fact some huge differences. The IP monitors are essentially like All-In-One Android based computers, capable of running various versions of popular VMS software and some with the option to save to onboard memory or external drives and memory cards. These are becoming very popular with new smaller (8-16 camera) IP installs as they basically remove the need for an NVR or dedicated storage server. Developments in the area of WiFi and 5G connectivity are showing great promise of being capable of transferring the amount of data generated meaning the next step in this market would maybe be to incorporate wireless connectivity in the IP monitor and camera setup. This brings its own issues with data security and network reliability, but for small retail or commercial systems where the data isn’t sensitive it represents a very viable option, doing away with both expensive installation of cabling and the need for an NVR. Larger systems would in all likelihood be unable to cope with the sheer amount of data required to be transmitted over the network, and the limited range of current wireless technologies would be incompatible with the scale of such installs, so hard wiring will still be the best option for these for the foreseeable future. There will be a decline in the physical display market as more development goes into Augmented and Virtual Reality Analogue HD options Analogue HD options have come a long way in a quite short time, with the latest developments able to support over 4MP (2K resolution), and 4K almost here. This has meant that for older legacy installations the systems can be upgraded with newer AHD/TVI/CVI cameras and monitors while using existing cabling. The main benefit of the monitors with native AHD/TVI/CVI loopthrough connections is their ability to work as a spot monitor a long distance from the DVR/NVR. While co-axial systems seem to be gradually reducing in number there will still be older systems in place that want to take advantage of the benefits of co-axial technology, including network security and transmission range. Analogue technologies will eventually become obsolete, but there is still much to recommend them for the next few years. Analogue technologies will eventually become obsolete, but there is still much to recommend them for the next few years Another more niche development is the D2IP monitor, which instead of having IP input has HDMI input and IP output, sending all activity on the screen to the NVR. This is mainly a defence against corporate espionage, fraud and other sensitive actions. While this has limited application those who do need it find it a very useful technology, but it’s very unlikely to become mainstream in the near future. Augmented Reality and Virtual Reality Does the monitor industry as a whole have a future? In the longer term (decades rather than years) there will definitely be a decline in the physical display market as more and more development goes into AR (Augmented Reality or Mixed Reality depending on who’s definition you want to take) and VR (Virtual Reality). Currently AR is limited to devices such as smartphones (think Pokémon Go) and eyewear, such as the ill-fated Google Glass, but in the future, I think we’ll all have optical implants (who doesn’t want to be The Terminator or RoboCop?), allowing us to see whatever we decide we want to as an overlay on the world around us, like a high-tech HUD (Heads Up Display). VR on the other hand is fully immersive, and for playback or monitoring of camera feeds would provide a great solution, but lacks the ability to be truly useful in the outside world the way that AR could be. Something not directly related to the monitor industry, but which has a huge effect on the entire security industry is also the one thing I feel a lot of us have been oblivious to is the introduction of quantum computers, which we really need to get our heads around in the medium to long term. Most current encryption technology will be rendered useless overnight when quantum computers become more widespread. So, where does that leave us? Who will be the most vulnerable? What can we do now to mitigate the potential upheaval? All I can say for sure is that smarter people than me need to be working on that, alongside the development of the quantum computer itself. Newer methods of encryption are going to be needed to deal with the massive jump in processing power that comes with quantum. I’m not saying it will happen this year, but it is definitely on the way and something to be planned for.
Today, almost every employee carries with them a smart device that can send messages, capture, and record images and increasingly live-stream video and audio, all appended with accurate location and time stamping data. Provide a way for staff to easily feed data from these devices directly to the control room to report an incident and you have created a new and extremely powerful ‘sensor’, capable of providing accurate, verified, real-time multi-media incident information. You need only to watch the television when a major incident is being reported. The images are often from a witness at the scene who recorded it on their device. It is madness that it has until now been easier for people to share information around the world via Facebook and YouTube etc, in a matter of minutes, than it is to transmit it to those that need to coordinate the response. The public as an additional security and safety sensor In the UK, a marketing campaign designed by government, police and the rail industry is currently running. Aiming to help build a more vigilant network on railways across the country and raise awareness of the vital role the public can play in keeping themselves and others safe, the ‘See It. Say It. Sorted’ campaign urges train passengers and station visitors to report any unusual items by speaking to a member of rail staff, sending a text, or calling a dedicated telephone number. Essentially, the campaign is asking the public to be an additional safety and security sensor. However, with the help of the latest mobile app technology, it is possible to take things to a whole new level and this is being demonstrated by a large transport network in the US. This organisation recognised that the ideal place to begin its campaign of connecting smart devices to the control room as an additional sensor, was by engaging its 10,000 employees (incidentally, this is approximately twice the number of surveillance cameras it has). These employees have been encouraged to install a dedicated app on their mobile devices that enables them to transmit important information directly to the control room, as well as a panic button for their own safety. This data can be a combination of images, text, audio, video and even live-streaming, to not only make the control room aware of the situation but give them eyes and ears on the ground. For the control room operator, the insights being fed to them from this ‘sensor’ have arguably more value than any other as they provide pinpoint accurate and relevant information Combatting control room information overload For the control room operator, the insights being fed to them from this ‘sensor’ have arguably more value than any other as they provide pinpoint accurate and relevant information. For example, if an alert comes in about a fire on platform 3, the operator doesn’t necessarily require any of the information from the other sensors, nor does he need to verify it’s not a false alarm. He knows that the information received has been ‘verified’ in-person (it is also time and location stamped) and that there is an employee located in the vicinity of the incident, who they can now directly communicate with for a real-time update and to co-ordinate the appropriate response. Compare this to a 24/7 video stream from 5000 cameras. It is in stark contrast to the typical issue of sensors creating information overload. The employee only captures and transmits the relevant information, so in essence, the filtering of information is being done at source, by a human sensor that can see, hear, and understand what is happening in context. So, if an intruder is climbing over a fence you no longer need to rely on the alert from the perimeter alarm and the feed from the nearest camera, you simply send a patrol to the location based on what the person is telling you. Furthermore, if the control room is operating a Situation Management/PSIM system it will trigger the opening of a new incident, so when the operator receives the information they are also presented with clear guidance and support regarding how to best manage and respond to that particular situation. Transport networks are using staff and the public as additional safety and security sensors Application of roaming smart sensors To be clear, this is not to suggest that we no longer need these vitally important sensors, because we do. However, one major reason that we have so many sensors is because we cannot have people stationed everywhere. So, in the case of the US transit company, it has been able to add a further 10,000 roaming smart sensors. This can be applied to other industries such as airports, ports, warehouse operations, stadiums, and arenas etc. Now, imagine the potential of widening the scope to include the public, to truly incorporate crowdsourcing in to the day-to-day security function. For example, in May, it was reported that West Midlands Police in the UK would be piloting an initiative that is asking citizens to upload content relating to offences being committed. Leveraging existing hardware infrastructure Typically, when introducing any form of new security sensor or system, it is expected to be an expensive process. However, the hardware infrastructure is already in place as most people are already in possession of a smart device, either through work or personally. What’s more, there is typically an eager appetite to be a good citizen or employee, just so long as it isn’t too much of an inconvenience. Innovations in smart mobile devices has moved at such a pace that whilst many security professionals debate if and how to roll-out body-worn-cameras, members of the public are live-streaming from their full HD and even 4K ready phones. The technology to make every employee a smart sensor has been around for some time and keeps getting better and better, and it is in the pockets of most people around the world. What is different now is the potential to harness it and efficiently bring it in to the security process. All organisations need to do is know how to switch it on and leverage it.
Revader Security has agreed a strategic partnership with Dynamic CCTV, a trade supplier of professional CCTV to the security industry. Revader Security’s range of products include Transit rapid redeployable cameras which are straightforward to install in virtually any location and can be rapidly repositioned to respond to changing security demands. Powered by battery or mains, footage can be viewed and downloaded over wireless and mobile networks. Remote monitoring solutions The company also produces a range of mobile power solutions (PowerPaks) and a range of accessories to interface with the redeployable CCTV products. Revader Security has also developed a range of diesel and battery powered rapid deployment CCTV towers which are proving increasingly popular with end users and the security trade as a rental opportunity. Dynamic CCTV will promote, supply and support Revader Security’s range of products As complete surveillance, recording and remote monitoring solutions, they are ideal for deployment into situations where little or no existing infrastructure is present. Dynamic CCTV will promote, supply and support Revader Security’s range of products with trade customers across the UK, drawing on over 25 years’ experience in the marketplace as one of the suppliers of CCTV to the security industry. Digital recording systems Dynamic CCTV is a Hikvision UK authorised distributor, providing the latest innovative CCTV equipment at very competitive pricing - including Digital Recording Systems, IP Cameras and CCTV monitoring equipment, along with products from other manufacturers such as TP-Link, GJD, Iiyama, TOA, Ubiquiti and Veracity. Stuart Caldecourt, Managing Director at Revader Security commented: “We are delighted to be partnering with Dynamic CCTV, who have an outstanding track record in the supply of professional CCTV products across the UK – and an impressive engineering and support capability proven over many years.”
Dundee’s rejuvenated waterfront has breathed new life into the city, and not far from the new V&A Museum building is Foxlake Dundee, an exciting new water sports facility. Taking advantage of the regenerated docks area, Foxlake Dundee offers cable wakeboarding – where boarders are propelled by an electric cable rather than a boat – paddle boarding and Scotland’s first urban Aqua Park. Hikvision thermal video solution Foxlake Dundee was the second Foxlake water park to open, following the very successful adventure park in Dunbar, East Lothian, on the Scottish coast. The Dundee facility, which opened fully in summer 2018, includes a large floating assault course, which has proven hugely popular with visitors, featuring huge obstacles, slides and rafts, and a giant 3.5m inflatable tower known as ‘the Mountain’. Unfortunately, due to its city centre location, the assault course and the wider facility was likely to be something of a magnet for unauthorised activity, primarily of the inebriated variety, explains Zak Hegarty, Foxlake Dundee’s manager. “Because of our location, right in the heart of Dundee city centre, we’re quite near a lot of pubs,” Hegarty adds. “And sometimes a 3.5m floating inflatable tower looks pretty inviting to someone with a quantity of ale in their system – it looks like an irresistible challenge.” Remote HD CCTV monitoringI introduced myself as I saw they were opening and was invited initially to look at a CCTV system" The concern was that accidental or deliberate damage or vandalism to the equipment was a real risk – and along with that came the danger of injury or worse to those attempting to exploit the park, at night, in the dark, unsupervised on the water. Hegarty’s first instinct was to investigate the option of manned guarding: having a security officer on-site during those out of hours periods overnight when the facility was at its most vulnerable. But an approach from Brian Davidson of Webster Security & Fire was to change his mind. Davidson had noticed the development in the docklands with interest. He approached Hegarty to see if Webster Security & Fire might be able to help with securing the site. “I introduced myself as I saw they were opening and was invited initially to look at a CCTV system,” Davidson says. “This then blossomed during further conversations into a proactive, remotely monitored CCTV solution. They were looking at going down the route of employing manned guarding for when the site was closed, but we thought this would provide a cost-effective and workable solution that offered the same level of protection.” GJD motion detectors The challenges presented by the Foxlake Dundee site were not insignificant. The system needed to be remotely monitored and based on some form of movement detection – on a site which itself was constantly moving, due to the changing tidal water levels. Davidson and Webster Security & Fire got in touch with Hikvision in Scotland and together they designed a solution to meet all of Foxlake’s needs. The centrepiece of the system proposed by Davidson and Webster Security & Fire was the use of Hikvision thermal cameras to detect activity on the jetties. This is complemented by the use of GJD motion detectors and Hikvision cameras to pick up movement on approach areas, further Hikvision cameras which monitor the internal office reception areas, and additional Hikvision cameras providing a security, health and safety and management overview of the both the assault course and the paddle and wakeboarding facility areas. A public address tannoy system is also connected to the surveillance solution. Hikvision thermal bullet cameras The Hikvision thermal bullet cameras highlight areas of heat difference in the field of view The Hikvision thermal bullet cameras highlight areas of heat difference in the field of view – so a human body is always visible as hotter than its surroundings, particularly in a marine or waterfront environment. Hikvision’s thermal cameras also utilise behaviour analysis technology, so figures moving into specific zones in the image can automatically generate alarms. The advantage of thermal cameras for a water-based site like Foxlake is that they can operate in all weather conditions – they’re not impeded by fog, mist, heavy rain, snow or other environmental factors, the sorts of conditions which could severely impede even the most advanced of conventional cameras. Hikvision 8-channel DeepinMind NVRs The other cameras in the Foxlake Dundee system benefit from Hikvision’s Darkfighter technology, allowing for video monitoring and recording in even the lowest of light conditions. And the whole solution records to a Hikvision 8-channel DeepinMind network video recorder, which utilises powerful AI technology to learn to filter out false alarms and accurately raise alerts. In the evening, after normal operating hours, the site is locked up and alarms are set. It’s then remotely monitored by the Corps of Commissioners, who are alerted when the thermal cameras or motion detectors pick up any movement on the site. Operators check the live cameras to confirm that intrusion has occurred. If an intruder is detected, they immediately contact Foxlake management via phone, and are also able to contact police if required. At the same time, the Corps operatives can use the PA system to issue warning announcements to allow the intruders to know they are being monitored. The effect is almost instantaneous, Hegarty says. Enhanced intrusion detectionThe overall reception for the video surveillance solution has been extremely positive “We’ve had three incidents since the system was installed,” he says, “and the response by the intruders is pretty remarkable. I’ve reviewed the footage and compared it to the time notification I’ve received a missed call on my phone: you can see the intruder on the video footage hear the warning, and then they’re off. They just leave straight away. It’s amazingly effective.” The overall reception for the video surveillance solution has been extremely positive. “We’re really happy with the system,” Hegarty says. “The video footage quality is very high and we’re glad we haven’t had to go down the manned guarding route, as similar facilities have done. We appreciate that Webster and Hikvision took the time and thought to design something that would work for us in our specific circumstances. Of course, the proof is in the performance, and the fact that a number of intruders have been quickly and effectively warned away is evidence that it is doing the job it was designed for.”
GJD will be unveiling its latest developments and launching exciting new products at The Security Event 2019, which is taking place at the NEC in Birmingham on 9th – 11th April 2019. The Clarius Star and the ATEX certified Active Infra-Red beam are the latest additions to GJD’s product offering, both products will be demonstrated alongside GJD’s highly reputable D-TECT and Clarius product ranges. The Security Event is a major new exhibition created for the commercial and residential security market. GJD will be showcasing its products on Stand SE04. Ana Maria Sagra-Smith, GJD’s Sales and Marketing Director commented: “We are happy to announce we will be exhibiting at The Security Event 2019. Visit the GJD stand to discuss your next security project and see the benefits of our security solutions.” Clarius Star LED floodlight with PIR detection The Clarius Star is a powerful 20W LED die cast aluminium floodlight with optional PIR detection The Clarius Star is a powerful 20W LED die cast aluminium floodlight with optional PIR detection. It is designed for general lighting applications and is perfect for residential use to brighten up gardens, patios, driveways and entrance ways, as well as commercial and industrial outdoor area floodlighting. One of the most notable features of the Clarius Star is its super bright Luxeon LEDs incorporating 2500+ Lumens. Other key features include optional PIR detection, dawn/dusk setting with manual override, its compact slimline design and IP65 rating. The ATEX Infra-Red Beam set is certified and designed for use within the petrochemical and oil sectors, as well as other hazardous environments. Major features include a 100m beam range, as well as intrinsically sealed and explosion proof housing. D-TECT IP detector Visitors will also see the company’s D-TECT IP detector range, which is designed with the professional installer in mind. The range is packed with the latest features and smoothly integrates with third party cameras, VMS providers and home automation software. GJD’s security equipment provides the professional installer with reliable security solutions to match exact site requirements.
A brief history of access control credentialsDownload
6 questions to ask when choosing a security systemDownload
Boosting on-site safety and securityDownload
Softil foresees MCC Over LTE communications playing a major role in operations in the Mining and Transportation industry
- Softil foresees MCC Over LTE communications playing a major role in operations in the Mining and Transportation industry
- eyevis UK video wall successfully secures Oxford Street store for five years, 24/7
- Siklu mmWave technology deployed in Cambridge City Centre for CCTV surveillance system
- Airbus Defence and Space provides Tetra technology for Biathlon World Championships 2016 in Oslo, Norway