Airports present a complex challenge to security managers, representing in sharp relief the tension between the need for efficiency and that of maintaining the highest levels of security standards.

As the primary passenger travel hubs of the modern era, airports see the most significant amount of traveller traffic as billions pass through their gates annually on their way to their destinations, both domestic and international. This trend of higher rates of air travel shows no signs of letting up any time soon as global demand for air travel continues to be on the rise, hitting an additional 5% of growth by June of 2019.

Challenging security managers

The challenge for security managers becomes one of how to ensure that all of these travellers are able to move as freely as possible to reach their gate while ensuring that they and the employees who facilitate the operations are all screened for any potential threats to security.

Airport security managers are seeking out technologies that can help their teams to do more within their constraints

In response, airport security managers are seeking out technologies that can help their teams to do more within their constraints. This article highlights four different technologies that are making their way into airport security managers’ planning as they build out their strategies for the year ahead. Airplanes and airports represent ideal targets for violent actors seeking to carry out well publicised, substantial attacks.

Air travel industry

Assaults on the airport grounds or attacks on airborne craft with an explosive or other means have the potential to grab headlines, cause massive casualties, harm the air travel industry, and draw significant reactions from authorities. For these reasons and more, the consequences stemming from a successful attack in this space can be severe and leave little room for error.

Striking a balance between the two seemingly conflicting requirements is a difficult act, but is achievable when they define the threat models and implement the necessary solutions and strategies to reach the goals. Building a strategy starts with thinking about how to implement inspections before the travellers reach the terminal. In an ideal security situation, all plots to carry out attacks against an airport would have been picked up by intelligence operations long before the perpetrators even reach the grounds of the airfield.

Air travel security

Intelligence failures happen and one needs to have measures in place to prevent attackers

However, intelligence failures happen and one needs to have measures in place to prevent attackers from reaching the terminals where they can carry out their attacks, potentially causing significant losses of life. The June 2016 attack on Istanbul’s Ataturk Airport that killed 41 people and left more than 230 injured was a stark reminder that attackers do not even have to pass through terminal security in order to pose a threat to air travel security.

Controlling access to the terminals with a defined checkpoint at the entrance to the grounds can be a good start for defending your airport. It is advisable to offer a multi-lane checkpoint which compels the incoming traffic to slow for an inspection that allows security officers to perform a quick visual inspection of the vehicle and its passengers, asking them a question or two to ascertain whether they require additional checks depending on whether they show suspicious behaviour.

Vehicle inspection technologies

As the vehicles cross through the checkpoint, interacting with personnel who look into the vehicle’s interior, there is an opportunity to also scan the undercarriage of the vehicle for additional threats such as explosives or other weapons which might be hidden below.

Under vehicle inspection technologies (UVIS) that utilise high-resolution cameras to capture images for deep learning analysis allow security teams to scan and detect potential threats in a matter of seconds. Advanced systems in this market use anomaly detection to identify suspicious items based on their deep understanding of the various elements that make up the vehicle (i.e. the exhaust pipe, brake lines, etc.), and can alert security teams to the need for additional checks if it finds something that is out of place.

Compromising security requirements

The UVIS technology gives airports the ability to move vehicles through the checkpoint quickly

These high-end solutions do not require previous scans of the vehicle or a manufacturer’s model, giving it a ‘first pass’ capability that is essential for airports that deal with new traffic on a regular basis. They also offer comparison technology which can play an important role for dealing with insider threats, which will be covered in our next post.

The UVIS technology gives airports the ability to move vehicles through the checkpoint quickly, only flagging those that raise red flags for more intensive scans, thus minimising the time spent stuck waiting for inspections without compromising on security requirements. Once the travellers reach the terminal and check in, they are ready for the next stage of the security inspections before reaching the gate hall. Often categorised by long lines and fraught nerves, this security check is ripe for a shake-up.

Traditional security line

An upgrade to the traditional security line, Automated Screening Lanes (ASL) systems offer a number of advantages. First, instead of a single line trudging along waiting to advance, travellers need only to find an open station where they can place their items into the waiting bins which are reported to be bigger than the previous models.

Hopefully, this means that the entire line will not be held up due to one slower to unload traveller. The bins themselves are equipped with RFID tags to identify as they pass through the scanners. If a bin is identified as needing an additional inspection, it can be diverted from the rest of the flow so as not to slow down the rest of the travellers as they make their way through the x-ray machine.

Scanning travel documents

Using these systems can be faster than having human agents checking IDs against the traveller

While the use of these systems is still at its early stages in just a relative handful of major American airports, they are already showing promise. Serving a dual purpose for both identification and tracking, facial recognition has the potential to add an important layer for verification at the security checkpoint.

When the traveller scans their travel documents (passport or another document), their picture can be taken to verify that they really are who they claim to be. Using these systems can be faster than having human agents checking IDs against the traveller and their database, both in terms of speed of operation and the ability to have multiple stations running non-stop without needing additional personnel on shift.

Facial recognition checkpoints

Along with this use, facial recognition can be used to track both travellers and others such as airport employees as they move throughout the facility. This capability can be useful for access control needs as well as a fast response for locating a person of interest

While just a few years ago one might have heard more noise against the idea of using facial recognition at these checkpoints, they have become a fait accompli at this point as biometrics and surveillance have become a standard at the airports. Once the travellers have been identified and their belongings are on their way through the x-ray, it is time for them to have their persons scanned for any dangerous items. This stage is a constant point of frustration as travellers work to remove belts and any other items that have no right to set off a beep but inevitably do.

Identifying suspicious items

The body scanners that have become a constant of the past decade or so raise issues of their own

The body scanners that have become a constant of the past decade or so raise issues of their own, ranging from privacy and health to discomfort of raising hands above head like a prisoner of war or worse. While it is still possible to request a good old fashioned pat down for those who prefer a more personal touch, there are new options out there that could offer a third way.

Standoff screening allows multiple people to walk through at a time, identifying any suspicious items that they may have on their person, and alerting for secondary searches. High-end estimates place the capacity of these systems to move nearly 2,000 people through their scans in an hour, depending in part on other conditions in the mix, while the low end puts the number somewhere closer to 500.

Faster security process

One should recognise that they are still early stage and are probably not where they need to be yet to operate on their own without additional measures. However, despite the calculated rollout, the development of these devices is a positive that can help lead to a faster security process by reducing friction at these high-stress points.

The post-9/11 era has brought about a sea change in how travellers are inspected

New challenges of how to detect and defend against threats place security managers in a perpetual search for new solutions. The post-9/11 era has brought about a sea change in how travellers are inspected before being allowed to reach the gates, and eventually their flights. Whereas the hijackings of the 1970s introduced the need for metal detectors, the shoe and underwear bombers have brought about the era of the body scanners in the first two decades of the millennium.

Security device innovations

Developments in the field will drive the next generation of security device innovations, which themselves are still playing catch-up to the last attack. Moving forward, airport security managers are on the lookout for systems that are more automated to help their teams make securely scanning the traveling public at an increasingly larger scale a more achievable task.

It is up to the innovators in the sector to provide them with capabilities that go beyond that of the human eye to find dangerous threats wherever they may be, keeping the stream of air travel flowing with minimal interruptions.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version Download PDF version

In case you missed it

Remote Monitoring technology: Tackling South Africa’s cable theft problem
Remote Monitoring technology: Tackling South Africa’s cable theft problem

For decades, cable theft has caused disruption to infrastructure across South Africa, and an issue that permeates the whole supply chain. Here, Ian Loudon, international sales and marketing manager at remote monitoring specialist Omniflex, explains how new cable-alarm technology is making life difficult for criminals and giving hope to businesses. In November 2020, Nasdaq reported that, “When South Africa shut large parts of its economy and transport network during its COVID-19 lockdown, organised, sometimes armed, gangs moved into its crumbling stations to steal the valuable copper from the lines. Now, more than two months after that lockdown ended, the commuter rail system, relied on by millions of commuters, is barely operational.” Private security firm Despite this most recent incident, cable theft is not a new phenomenon to sweep South Africa Despite this most recent incident, cable theft is not a new phenomenon to sweep South Africa. In 2001, SABC TV broadcast a story following two members of a private security firm working for Telkom, a major telecoms provider. In the segment, the two guards, working in Amanzimtoti on the south coast of KwaZulu-Natal, head out to investigate a nearby alarm that has been triggered. They reach a telecoms cabinet and discover that it has been compromised, with the copper cable cut and telephone handsets strewn across the ground. In the dark, they continue to search the area when one of the guards discovers the problem: 500 metres of copper wire has been ripped out. In their haste, the thieves have dropped their loot and fled. Widespread cable theft Had they managed to get away, they would have melted the cable to remove the plastic insulation and sold the copper to a local scrap dealer for around 900 Rand, about $50 US dollars. For the company whose infrastructure has been compromised, it may cost ten times that amount to replace and repair the critical infrastructure. The disappointing takeaway from this story is that two decades on from this incident the country still faces widespread cable theft, whether it’s copper cables from mines, pipelines, railways, telecoms or electrical utilities. In fact, the South African Chamber of Commerce and Industry estimates that cable theft costs the economy between R5–7 billion a year. The answer to the problem must go further than the existing measures used by companies. Detect power failure Most businesses already invest in CCTV, fences, barriers and even patrol guards, but this is not enough. Take the mining sector, for example. These sites can be vast, spanning dozens of kilometres - it’s simply not cost effective to install enough fences or employ enough guards or camera operators. As monitoring technology gets better, the company has seen site managers increasingly use cable alarms in recent years that detect when a power failure occurs. The idea is that, if one can detect a power failure, they can detect whether the cable has been cut The idea is that, if one can detect a power failure, they can detect whether the cable has been cut. The problem is though: how does one distinguish the difference between a situation where a cable has been cut intentionally and a genuine power outage? Power outages in South Africa are an ongoing problem, with the country contending with an energy deficit since late 2005, leading to around 6,000 MW of power cuts in 2019. Remote terminal units Eskom Holdings SOC Ltd., the company that generates around 95 per cent of South Africa’s power has already warned of further blackouts as the company works to carry out repairs to its power plants. According to a statement on the company’s website, “Eskom spends in the region of R2 billion a year replacing stolen copper cables." The result is that criminals take advantage of the gaps in power to steal cable, timing their robberies to coincide with the published load shedding schedules. The basic alarms used to detect power outage won’t recognise the theft because they register a false-positive during a power cut. By the time the power comes back on, the deed has been done and the criminals have gotten away with the cable. The good news is that recent breakthroughs in cable monitoring technology are helping tackle just this problem. New alarms on the market now combine sophisticated GSM-based monitoring systems that use battery powered remote terminal units. Legitimate supply chain Unlike the basic alarms that look for the presence or absence of power, these new systems monitor whether the cable circuit is in an open or closed state. In the event of a power outage, the unit continues to run on battery power and can detect if a cable has been cut, sending a priority SMS alert to the site manager immediately, giving them a fighting chance to prevent a robbery in progress. Beyond the opportunistic theft carried out by petty criminals, the theft of copper cables forms a wider problem Beyond the opportunistic theft carried out by petty criminals, the theft of copper cables forms a wider problem across the supply chain in South Africa. In recent years, the combination of unscrupulous scrap dealers, the alleged involvement of large scrap processing companies and lax penalties meant that much of the stolen copper ended up back in the legitimate supply chain. However, recent changes in the law have sought to take a tougher stance on copper theft. Alarm monitoring technology According to the Western Cape Government, “The Criminal Matters Amendment Act, regulates bail and imposes minimum offences for essential infrastructure-related offences." The act, which came into effect in 2018, recommends sentencing for cable theft, with the minimum sentence for first-time offenders being three years and for those who are involved in instigating or causing damage to infrastructure, the maximum sentence is thirty years. It seems to be working too. In January 2021, the South African reported that a Johannesburg man was sentenced to eight years behind bars for cable theft in Turffontein. While the longer-term outlook is a positive one for industry, the best advice for businesses seeking to alleviate the problem of cable theft in the immediate future is to invest in the latest cable-theft alarm monitoring technology to tackle the problem and make life difficult for criminals.

What are the positive and negative effects of COVID-19 to security?
What are the positive and negative effects of COVID-19 to security?

The COVID-19 global pandemic had a life-changing impact on all of us in 2020, including a multi-faceted jolt on the physical security industry. With the benefit of hindsight, we can now see more clearly the exact nature and extent of that impact. And it’s not over yet: The pandemic will continue to be top-of-mind in 2021. We asked this week’s Expert Panel Roundtable: What have been the positive and negative effects of Covid-19 on the physical security industry in 2020? What impact will it have on 2021?

Maximising supermarket safety with real-time surveillance solutions
Maximising supermarket safety with real-time surveillance solutions

Supermarket employees have been the hidden key workers of the past year, keeping shelves stocked and queues under control as panic buying gripped the nation. As a result of being expected to enforce face covering and social distancing regulations, they also been asked to act as de-facto security guards alongside their existing duties. This is problematic as many employees have never had to deal with this kind of responsibility before, let alone received any conflict de-escalation training. In order to maintain the safety and security of their staff retailers must take additional steps to uphold their duty of care, with the NPCC recently specifying that it is the responsibility of retailers ‘to manage entry to their stores and compliance with the law while customers are inside’. Supermarkets in particular need to be aware of this requirement, as the big four recently announced that their employees would now be challenging customers shopping in groups and those not wearing masks. Verbal abuse from the public Crime against retail employees has already been a major issue over the course of the pandemic, confirmed by research from the Union of Shop, Distributive and Allied Workers that found 90% of retail staff in the UK experienced verbal abuse last year. The Co-op has recently been vocal about the effects of the pandemic and lockdown-related frustrations on its employees.90% of retail staff in the UK experienced verbal abuse last year The supermarket reported a 140% increase in crime within its stores over the past year, with many of the 200,000 cases related to verbal and physical abuse experienced by employees. Jo Whitfield, Co-op Food chief executive, confirmed that the number of issues has already increased drastically as a result of staff enforcing COVID-secure guidelines. So, what steps must retailers take to ensure their duty of care remains intact as employees take on new enforcement responsibilities? Introducing real-time surveillance technology to support security guards and shop floor employees alike is vital. Bolstering front line defences Security guards posted at supermarket entrances are the first line of defence against shoppers determined to break the rules. However, they are now being pulled in multiple directions with queues to monitor and occupancy to manually keep track of, along with the usual security alarms to respond to. With one person usually posted at the entrance at any one time it’s simply impossible to have eyes everywhere, which is where automated video surveillance comes in. COVID-specific technologies, such as mask detection and occupancy management systems, are now the golden bullet to retail safety and security.Mask detection and occupancy management surveillance tools can automatically alert a shopper Mask detection and occupancy management surveillance tools can automatically alert a shopper whether or not they are allowed to enter the store on their approach to the door. The system surveys the person and a screen will automatically display different instructions depending on the situation: whether they must put a mask on before they enter, wait until capacity is low enough to enable social distancing or, if the previous criteria are fulfilled, that they are free to enter. COVID-secure safety This stand-off technology minimises the need for contact between security personnel and shoppers, allowing security guards to complete their usual duties, safe in the knowledge that the store is being managed in a COVID-secure way. With a hands-off approach enabled by surveillance technology, the potential for tense confrontation is greatly diminished as customers will usually comply to the reminder shown to them and put on a mask or wait without further prompting from staff. With security personnel able to better focus their attention on the stubborn rule-breakers,It is crucial that retailers choose a solution embedded in real-time connectivity this responsibility will no longer land with staff on the shop floor who are often ill-equipped to deal with this situation. It is crucial that retailers choose a solution embedded in real-time connectivity that will allow all store entrances to be screened simultaneously. Nobody can be in multiple places at once, but this connectivity allows alerts to be streamed instantly to any connected device that can be monitored by just one employee, meaning they can review the alerts that require their attention without needing to be physically present or re-tasked away from their day-to-day duties. Instant reassurance with body worn tech As a customer-facing role, there can be no guarantee that shop workers will never experience a potentially violent confrontation with a customer, which is where the presence of live streaming body worn cameras can help. While they may not always be trained to de-escalate a risky situation, being able to discreetly call for assistance can provide the reassurance employees need to feel safe and supported at all times. If an employee asks a customer to put a mask on while they’re in the store or step back from another shopper and the situation turns abusive – verbally or physically – a live streaming-enabled body worn camera can be triggered to stream a live audio and video feed back to a central control room manned by trained security personnel.A live streaming-enabled body worn camera can be triggered This real-time footage gives security staff exceptional situational awareness, allowing them to fully assess the situation and decide on the best course of action to support the employee in distress, whether that is going to the scene to diffuse the situation or contacting the police in more serious circumstances. Bolstering front line security This goes one step further than record-only body worn cameras, the capabilities of which these next generation devices match and exceed. Record-only cameras are well-suited to provide after-the-fact evidence if a customer interaction turns sour, but they do little to provide reassurance to out of depth employees in the moment. The duty of care grocery retailers must provide to their employees has never been more important, with staff taking on new mask and social distancing enforcement responsibilities and managing interactions with frustrated customers. Bolstering front line security and giving staff extra reassurances with the introduction of real-time video surveillance technology is a crucial step for retailers striving to keep employees and shoppers safe during these challenging times.