Hanwha Techwin QNP-6230RH 2MP 23x IR PTZ Camera

Technical Specification

Features:

Make: Hanwha Vision
Model code: QNP-6230RH
Series: WISENET Q SERIES
Chip Inch Size: 1/2.8 inch
Colour Type: Colour / Monochrome

Additional info:

2MP (1920 x 1080) resolution H.265, H.264, MJPEG codec support Multiple streaming, WiseStream II support IR range for up to 328ft Day & Night (ICR), WDR (120dB) DIS with Built-in Gyro sensor Tampering, Motion detection Memory slot (Max. 256GB) IP66, IK10, IK10 24VAC / HPoE, Built-in -58°F (-50°C) Heater (24VAC only)

Contact manufacturer Contact manufacturer

Datasheet Datasheet

Make	Hanwha Vision
Manufacturer	Hanwha Vision Europe (formerly Hanwha Techwin Europe)
Category	CCTV>IP cameras
Model code	QNP-6230RH
Series	WISENET Q SERIES
Chip Inch Size	1/2.8 inch
Colour Type	Colour / Monochrome
Resolution	2 MP resolution
Specialist Type	PTZ
Sensitivity Lux	0.05
Auto Iris	Yes
Electrical Specifications	Voltage: 24 V AC, HPoE Power Consumption: 24VAC: Maximum 83W (typical : 30W) / HPoE : Maximum 51W (typical : 30W)
Motion Activated	Yes
Focal Length mm	4.44 ~ 102.2
Wide Dynamic Range	Yes
Network Properties	Image Frame Rate: 30 fps Interface: RJ-45(10/100BASE-T), SFP(Optional) Network Protocols: IPv4, IPv6, TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTCP,RTSP, NTP, HTTP, HTTPS, SSL/TLS, DHCP, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS, QoS, PIM-SM, UPnP, Bonjour, LLDP, SRTP
Back Light Compensation	Yes
Auto Gain Control	Yes
White Balance	Yes
Electronic Shutter Range	2~1/12,000sec
Zoom	Yes
Compression Type	H.265/H.264,MJPEG
Physical Specifications	Weight g: 6800 Dimensions mm: Ø236.9 x 407.7
Environmental Specifications	Protection: IP66, IK10 Operating Temperature ^oC: -50 ~ +55 C (-58 ~ +131 F) Operating Humidity %: <90
Additional info	2MP (1920 x 1080) resolution H.265, H.264, MJPEG codec support Multiple streaming, WiseStream II support IR range for up to 328ft Day & Night (ICR), WDR (120dB) DIS with Built-in Gyro sensor Tampering, Motion detection Memory slot (Max. 256GB) IP66, IK10, IK10 24VAC / HPoE, Built-in -58°F (-50°C) Heater (24VAC only)
Download PDF version Download PDF version