The FUJINON SX800 camera system marks FUJIFILM's successful entry into the surveillance systems market. FUJIFILM presents the new long-range camera module FUJINON SX800 to the surveillance systems market. With a full HD camera and an optically stabilized, 40x zoom lens from FUJINON, two high-performance components are integrated into one system. This innovation is the result of years of experience in digital cameras and a dedication to the highest optical quality. Thanks to its powerful 1/1.8" image sensor, the long focal length range of 20 mm to 800 mm and state-of-the-art image processing technology, the FUJINON SX800 is ideally suited for aerial surveillance. In modern society, the security needs of citizens are constantly increasing. Surveillance cameras with long focal lengths are not only used to address sensitive issues such as border security but are increasingly being incorporated into public infrastructure such as airports, seaports and motorways. Long range surveillance systems must cope with special challenges. For optics with long focal lengths, the smallest vibrations are sufficient to compromise the image information. Heat haze or fog in the air also impair image quality. And, a focus drive that is too slow leads to safety-relevant information loss. However, with the development of the new FUJINON SX800, FUJIFILM has found a way to minimize the impact of these challenges. Instead of developing a surveillance camera and a separate matching lens, the concept of a fully integrated system consisting of camera and lens has been realized. In addition to the high-quality zoom optics, the FUJINON SX800 has a powerful combined optical and electronic image stabilization mechanism that provides angle correction of up to ±0.22 degrees. The integrated high-speed autofocus provides a sharply focused image in less than a second, while a fog filter and heat haze reduction technology helps prevent weather interference. The system provides consistently sharp images – even of objects several kilometers away. In addition, the integrated design of the new FUJINON SX800 reduces the high adjustment effort normally required for camera installation. As of Q3 2019, the FUJINON SX800 will be available as both a mobile stand-alone device and as a system that can be integrated into a pan-tilt head.
System OverviewExperience 4MP full HD colour video and the simplicity of reusing existing coaxial infrastructure with HDCVI. The full-colour starlight HDCVI camera presents a high quality colour image with rich details even in total darkness conditions. It offers various fixed lens models with a multi-language OSD and HD/SD switchable output. It adopts two powerful warm white LED illuminators, covering an effective range up to 40 m (131.23 ft). The LEDs switch on automatically in darkness to capture detail-packed fullcolour images 24/7, ensuring anthentic identificaiton of objects. It is an ideal choice for applications such as schools, retail centers and parking lots. Functions Full-colour StarlightThe camera adopts F1.2 large aperture lens and 1/2.7" high performance sensor. With higher amount of absorbed light and advanced image processing algorithm, the camera presents an impressive lowlight performance with an exceptional balance between noise reduction and the blur of moving object. Warm Supplemental lightsWith two warm supplemental LED lights, the camera is able to provide a colourful and vivid image even in total dark. By default, the camera is set to smart light mode, in which the camera can automatically adjust the exposure time and light sensitivity simultaneously to avoid overexposureing of the objects in the image center. Also, the sensitivity and intensity of the LED lights can be remotely controlled by OSD menu. Broadcast-quality Audio*Audio information is used as supplementary evidence in video surveillance applications. The HDCVI camera supports audio signal transmission over coaxial cable. In addition, it adopts unique audio processing and transmission technology that best restores source audio and eliminates noise, guaranteeing the quality and effectiveness of collected audio information. 4 Signals over 1 Coaxial CableHDCVI technology supports 4 signals to be transmitted over 1 coaxial cable simultaneously, i.e. video, audio*, data and power. Dual-way data transmission allows the HDCVI camera to interact with the HCVR, such as sending control signal or triggering alarm.*Audio input is available for some models of HDCVI cameras. Long Distance TransmissionHDCVI technology guarantees long-distance and real-time transmission without any loss. It supports up to 700 m for 4MP HD video via coaxial cable, and up to 300 m via UTP cable.**Actual results verified by real-scene testing in Dahua's test laboratory. SimplicityHDCVI technology inherits the born feature of simplicity from traditional analogue surveillance system, making itself a best choice for investment protection. HDCVI system can seamlessly upgrade the traditional analogue system without replacing existing coaxial cabling. The plug and play approach enables full HD video surveillance without the hassle of configuring a network. Multiple-formatsThe camera supports multiple video formats including HDCVI, CVBS and other two common HD analogue formats in the market. The four formats can be switched over through OSD menu or by PFM820(UTC controller). This feature makes the camera to be compatible with most end users’ existing HD/SD DVRs. ProtectionThe camera's outstanding reliability is unsurpassed due to its rugged design. The camera is protected against water and dust with IP67 ranking, making it suitable for indoor or outdoor environments. With working temperature range of -40 °C to +60 °C (-40 °F to +140 °F), the camera is designed for extreme temperature environments. Supporting ±30% input voltage tolerance, this camera suits even the mostunstable power supply conditions. Its 4KV lightning rating provides protection against the camera and its structure from the effects of lightning.Add to Compare
VIVOTEK FD9187-HT is indoor dome network camera equipped with a full HD sensor enabling resolution of 2560 x 1944 at 30 fps. And FD9187-HT also supports standard 1920x1080 resolution at 60 frames per second. Featuring VIVOTEK SNV and WDR Pro technology, FD9187-HT is capable of capturing high quality image whether in high contrast or low light environment. The FD9187-HT offers remote focus lens for different user scenario. IR illuminators are equipped with 50 meter effective range for better night visibility. For indoor applications, PIR sensor is built-in to detect unexpected events. Employing VIVOTEK's Smart Stream III technology and H.265 codec support, the FD9187-HT reduces bandwidth up to 90%* while keeping great image quality. Additionally, powered by VIVOTEK Smart Motion Detection technology, the FE9187-HT can learn how to differentiate between the motion of people and objects, which make it enable to reduce the false alarms and have higher accuracy.
Increase safety and reduce risk on board your transit vehicles with March Networks® RideSafe MT Series IP Recorders. These all-IP units deliver highly-reliable video surveillance recording and management in a compact, rugged design that is ideal for mid-sized vehicles – like student and patient shuttles and paratransit buses. Available in 4-channel and 6-channel models, the RideSafe MT Series solution enables operators to capture everything that’s happening on the bus, inside and out. Whether you have one or a thousand vehicles, this plug-and-play recorder can operate as a standalone unit programmable through embedded software, or be remotely managed and monitored daily using March Networks Command™ for Transit video management software. Video from the recorder can also be integrated with existing CAD and AVL systems and mobile routers. Key RideSafe MT Series features include: Front panel LEDs for easy recorder diagnostics, including operational, recording and video export status Embedded Linux OS, to ensure reliable and secure video recording Real-time health monitoring, alerting operators to camera, recorder and network issues before they affect performance Vehicle metadata integration from CAD/AVL systems and accelerometers for accurate re-enactments, driver monitoring and investigations Configurable recording policies based on schedule, motion, incident/event and other user-definable variables Powerful video management software, providing the advanced tools and features needed to manage entire fleets Automated video and data extraction over WiFi or 4G networks Extended thermal range (ETR) models available
The ConteraCMR® NVR Appliance is designed to offer powerful IP recording in an affordable, compact chassis. It is equipped with an on-board 8 or 16 channel PoE switch, with a recording capacity of up to 24 channels, allowing for Plug and Play connection with Arecont Vision and ONVIF cameras or RTSP video streams. With full integration to ConteraWS® (Web Services), the NVR Appliance offers centralised user management, single sign-on convenience, mobile apps and a web client that allows for easy remote connection to your recorders. Network setup is fast and easy using ConteraWS and eliminates the need for port forwarding or DDNS. The ConteraCMR NVR Appliance runs on a secure Linux® OS and comes preloaded with ConteraVMS® Server software as a turn-key solution.
The Evolution Stainless Steel cameras, part of Oncam’s Specialist Camera Range, are unique to the 360-degree video surveillance market as they are the only ones certified for tough environments, indoor and outdoor. The 05MP and 12MP versions have been specifically designed to meet the needs of customers operating in demanding environments such as Food Processing, Industrial, Maritime and Ports and Safe City applications. The cameras’ resilient Stainless Steel 316 housing is manufactured for enhanced corrosion resistance. The IP66, IP67, IP68, IP69K, and NEMA 4X and 6P ratings make the enclosure fit for harsh environments, while its IK10+ rating makes it resistant to impacts of 40 joules. The NSF certification and HCV EU mark make the camera range unique, guaranteeing compliance with standards for commercial food equipment in both North America as well as Europe. The only 360-degree fisheye camera in a stainless steel housing, Oncam’s new and improved camera range is available for surface and pendant mount installations. A matching stainless steel arm allows for wall, corner and pole mounting. Evolution 05 Stainless Steel: EVO-05-SS2 Evolution 12 Stainless Steel: EVO-12-SS2
The Evolution 180 Outdoor Camera is built upon Oncam’s expertise and heritage on 360-degree technology. It is specifically designed for applications that require a dewarped panoramic view of an outdoor scene, without blind spots, from a single sensor camera. The 12MP high-resolution sensor and the built-in 3D dewarped panoramic video provides industry leading Panoramic+ views. The true day/night functionality allows images to be produced in all lighting conditions, including additional IR lighting. The camera is IP66, IP67, IP68, IP69K and IK10+ rated, making it a robust design. Its versatile enclosure enables wall and pendant mounting, while the integrated adjustable mounting allows for an angling of up to 45°. When angled, Oncam’s Angle Compensation Technology (ACT) corrects the view, straightening vertical lines in the scene.
System OverviewWith upgraded H.265 encoding technology, Dahua Lite series network camera has efficient video encoding capacity, which saves bandwidth and storage space. This camera adopts the latest starlight technology and displays better color image in the condition of low illumination. It supports SD card storage, dust-proof function, waterproof function and vandal-proof function, complying to the standards of IP67 and IK10 (Supported by some select models). Functions Smart CodecWith advanced scene-adaptive rate control algorithm, Dahua smart encoding technology realizes the higher encoding efficiency than H.265 and H.264, provides high-quality video, and reduces the cost of storage and transmission. WDRWith advanced Wide Dynamic Range (WDR) technology, Dahua network camera provides clear details in the environment of strong brightness contrast. The bright and dark area can get clear video even in high brightness environment or with backlight shadow. StarlightDahua Starlight technology mainly applies to the environment of low illuminance, and it can provide clear colorful video. Even in the environment of ultra-low illuminance, the technology can guarantee the good image effect. IVSWith advanced video algorithm, Dahua IVS technology supports intelligent functions, such as tripwire and intrusion. Protection (IP67, IK10, wide voltage)IP67: The camera passes a series of strict test on dust and soak. It has dust-proof function, and the enclosure can works normal after soaking in 1 m deep water for 30 minutes.IK10: The enclosure can stand the punch more than 5 times from a 5 kg hammer falling from a height of 40 cm (Impact energy is 20J).Wide voltage: The camera allows ±30% input voltage tolerance (wide voltage range), and it is widely applied to outdoor environment with instable voltage.
Hanwha Techwin’s Wisenet PNM-9000VD multi-sensor/multi-directional camera provides quality images and modular lens configuration at an affordable price. This camera supports 30fps image capture and true 120 dB WDR without compromising frame rate for each of its two 5MP sensors. Each sensor has its own Wisenet 5 chip, providing a full suite of built-in video analytics including loitering, directional detection, fog detection, tampering, motion detection and objects entering or exiting an area.
VIVOTEK’s VAST 2 is an easy to use IP video management software (VMS). To meet the real-world needs of users, it comes with exciting advancements such as easy operation on single or multiple monitors, custom layout to accommodate both corridor and panorama orientations, rapid export of multi-channel video and the acquisition of VCA analytics & cybersecurity attack events from VIVOTEK cameras and substations (such as NVRs) in a hierarchical system structure. In the new version update of VIVOTEK’s video management software VAST 2, several advanced user-centered functionalities will be unveiled. The new features include the Deep-Learning Technology Smart Search II, Cybersecurity Management Solution, and License Plate Recognition Integration. With this update, users can enjoy the intuitive interface of VAST 2 while achieving a higher level of management efficiency. Three new user-oriented benefits will be highlighted in VAST 2： Smart Search II Building on Deep-Learning Video Content Analytics, the Smart Search II of VAST 2 allows users to quickly search for specific objects and people in the specified region. While enabling People Detection feature, only people-based activities will serve as event triggers. The security operator no longer needs to search through extensive footage for critical videos, thus improving both efficiency and effectiveness. Cybersecurity Management Solution Offering the complete end-to-end cybersecurity protection, the new VAST 2 is fully integrated with VIVOTEK cameras and NVRs and becomes a powerful cybersecurity central management site. The protection includes Instant Alert Notifications, allowing users to receive notifications automatically, and the Cyber Risk Dashboard to visually identify common types of cyber-attacks. In addition, users can filter attack logs according to a range of criteria, making it quicker to find abnormal events and take necessary actions to minimize risks. License Plate Recognition Integration Now, the new VAST 2 is fully integrated with VIVOTEK’s LPR/ Automatic Number-Plate Recognition (ANPR) camera, IB9387-LPR. Users can see the live images with selected information, such as confidence level or black list status, which can in turn become a trigger source in Alarm Management, making it easy to intelligently manage license plate data.
IDIS has extended its award-winning DirectIP® camera range with the introduction of a new flagship 2MP 36x Lightmaster IR PTZ outdoor-ready camera for fast and precise pan/tilt/zoom performance.The new DC-S6283HRX Lightmaster builds on the specification of IDIS’s successful PTZ models, with a high-grade lens combined with advanced sensor technology and finely tuned, client-side image processing, allowing the capture of vivid, true colour video in extremely low light conditions. Excellent performance at long distances, with minimum motion blur, makes the DC-S6283HRX ideal for perimeters, shopping centres, stadia, outdoor spaces and public area applications.The camera benefits from IDIS’ signature true plug-and-play, one-click configuration and features 36x optical zoom, IR up to 350 metres, true wide dynamic range (WDR), digital image stabilization (DIS), a built-in heater and a vandal proof casing.“Designed for 24/7 accurate pan/tilt/zoom operation this new Lightmaster PTZ camera delivers unparalleled performance and exceptional detail when zooming. The camera is equipped with a variety of intelligent features and can move between pre-set positions and zoom in automatically in response to detected events. The result is maximum protection for a wide range of applications,” said James Min, Managing Director, IDIS Europe.The user experience is enhanced with IDIS Smart UX Controls, which is an award-winning, advanced and simple to use interface featuring intuitive slingshot and rubber-band style controls. Operators can smoothly and seamlessly follow moving objects in real-time with ground-breaking accuracy by panning images at different speeds and in different directions - literally without lifting a finger - by using a CTRL button and mouse combination.The camera uses H.264 and H.265 combined with IDIS Intelligent Codec to deliver significant bandwidth and storage savings and benefits from low Power over Ethernet (PoE) energy consumption.The risk of gaps in footage is eliminated with IDIS Smart Failover. In the event of network instability, the camera automatically records to an integral 256GB SD card and transfers data to the network video recorder (NVR) once connection is restored, which avoids the need for engineer call outs to retrieve footage.“We are listening and responding to customer demand with our new 2MP PTZ Lightmaster camera, providing an easy to deploy, low-storage and bandwidth solution for wide area coverage and perimeter detection,” said James Min, Managing Director of IDIS Europe. “It’s particularly suited to town centre and city surveillance, stadia, outdoor retail parks, manufacturing and logistics sites and high-security perimeter applications where outstanding performance and ease-of-use combined with a low total cost of ownership are becoming essential.”
AI series products adopt the most advanced AI technologies, including deep learning algorithms that primarily target people and vehicles, which provides higher flexibility and accuracy for end-users. This enables the Dahua AI series to offer various advanced applications such as Face Recognition, Metadata, traffic data statistics, etc. The complete lineup of Dahua AI includes network (PTZ) cameras, network video recorders, servers, and more devices. Beyond seeing the world, the power of AI allows devices to perceive the environment and understand the world in a better way. System Overview Dahua PTZ AI network camera adopts advanced CNN deep learning algorithms to support face recognition with high accuracy. The Dual 4MP Starlight Smart Capture Camera consists of panoramic camera and PTZ camera. Panoramic camera captures panoramas, and then PTZ camera takes detailed snapshots of objects and keeps tracking objects after rule violations occur. This camera possess wide monitor range and PFA algorithm that can always present a clear, focused image while zooming. Functions Dual PTZ systemPanoramic camera and Detail camera of the dual PTZ system can be adjusted horizontally and vertically. Face RecognitionOnce facial features are extracted from captured faces, they are stored in a database where they can be easily searched and compared against other images. Once a successful match is found, the system outputs the result. The Dahua Face Recognition camera supports a built-in database that stores up to 10,000 facial images, helping the camera achieve realtime face capture and comparison. Starlight TechnologyFor challenging low-light applications, Dahua's Starlight Ultra-low Light Technology offers best-in-class light sensitivity, capturing color details in low light down to 0.001 lux. The camera uses a set of optical features to balance light throughout the scene, resulting in clear images in dark environments. PFA TechnologyPFA technology has innovatively introduced new methods of judgment to ensure the accuracy and predictability of the direction of subject distance adjustment. The result is a set of advanced focusing algorithms. PFA ensures clarity of the image throughout the process of zooming and shortens focus time. The realization of PFA technology substantially improves user experience and increases product value. MetadataMetadata is feature attribute information extracted from a target object which can be used for data retrieval. There are four kinds of metadata supported by Dahua PTZ AI camera: human face, human body, motor vehicle and non-motor vehicle metadata. Facial information includes gender, age, glasses, masks, beards, etc. Human body information includes hat, top, top color, bottom, bottom color, bag, etc. Motor vehicle information includes plate color, type, vehicle color, sunshield, ornament, calling, seatbelt, smoking, annual inspection sticker, etc. Non-motor vehicle information includes type, color, top type, top color, people number, etc. Smart trackingHuman, motor vehicle, and non-motor vehicle, or their combinations can be set as objects. Once the objects selected trigger detection rules (like tripwire and intrusion), the detail camera will track them automatically. Perimeter ProtectionAutomatically filtering out false alarms caused by animals, rustling leaves, bright lights, etc. Enables system to act secondary recognition for the targets. Improving alarm accuracy. InteroperabilityThe camera conforms to the ONVIF (Open Network Video Interface Forum) specifications, ensuring interoperability between network video products regardless of manufacturer.
VIVOTEK ‘s new CC9381-HV is a 180-degress panoramic network camera, featuring its compact design and high-quality image capability, making it suitable for a wide array of both indoor and outdoor environments, such as boutiques, convenience stores, banks, schools and homes. Along with offering amazing 180° HFOV coverage, CC9381-HV offers up to 20 fps at 5-Megapixel resolution (30 fps at 5MP with WDR Off). This Panoramic Network Camera also incorporates other value-added features.With IR built-in 180° IR illuminators up to 15 meters, no matter day or night, light or dark, the new CC9381-HV always provides complete video security. Further, due to the SNV technology, areas of low light visibility are no longer an issue either. Equipped with WDR Pro technology, the CC9381-HV enable the camera to maintain optimal image quality and unparalleled visibility in high contrast lighting environments, as well as combined both H.265 and VIVOTEK Smart Stream III, it can reduce bandwidth and storage consumption more than 90% compared to traditional H.264 without smart streaming. In addition to its versatile coverage and features, the CC9381-HV is safeguarded by Trend Micro IoT Security to provide users with higher levels of network protection.
Consider your security needs met. The experts in thermal and perimeter security have packed everything you need into one affordable, easy-to-install camera. The FLIR Saros DH-390 Dome Camera includes IR and visible illuminators, plus Lepton thermal sensors to allow you to see in any condition. And with high-resolution video, you’ll never miss a thing.
Hikvision has launched a new Fisheye IP camera series (DS-2CD63X5G0) with AI. This 360˚ panoramic camera uses the deep learning technology to deliver a more accurate heat map functionality. It gives an enhanced view of its surroundings – and is especially useful in large retail applications. The cameras’ 360˚ panoramic image of the scene before it, means the user can see a wider area much more clearly. This is enhanced by independent control of a three-way infrared light, which can be separately configured to reduce the amount of ‘reflective’ wall space. This improves image quality, especially when placed in a corner location. The deep learning algorithm focuses only on human targets, improving the accuracy of the heat map functionality. This means users can see ‘hotspots’ in a space, showing areas that people visit, or pass, the most. An added layer to the heat map visualisation makes it a lot clearer than previous technologies, presenting more information in a clearer way. Despite the high quality of the images, the cameras boast extremely light bandwidth, saving storage and costs by using H265+ compression technology. They also support Multiple Expansion Modes, with up to 15 live view display modes available, designed for three different mounts. This means they can be more easily adjusted to meet the users’ exact preferences, and improve their browsing experience. Other features include: New Immervision lens (only 12MP, 1.29mm lens model) Up to 12MP resolution 120 dB WDR Up to 15m IR range Built-in microphone and speaker Smart features: 6 behaviour analyses, and 3 exception detections IK10/IP66 available. The cameras will be a useful addition to retail solutions, with heat mapping helping owners to understand customers’ psychology and identify which products attract the most attention on the shop floor. They can also be used in other large area applications, like train stations and public squares. The series will also be a boon to installers, with the ability to achieve monitoring which has no ‘dead angles’, making the solution more efficient and reducing installation costs. “We pride ourselves on continually advancing our technology and how it is implemented”, says Peter Guan, Director of Channel Sales and Marketing for Hikvision Europe. “This new Fisheye camera will provide clear flow information that will help users to make the right business decisions to make their spaces much more profitable.”
1.3 MP TVL resolution, HD, Digital (DSP), Auto Iris, 0.1 lux, 12 V DC, 2.8 ~ 12, Wide Dynamic Range, 1305 x 1049, Back Light Compensation, Auto Gain Control, White Balance, 1/60 (1/50) ~ 1/60,000s, >50, 8 W, 99 x 89 x 269, 800, -30 ~ +60 C (-22 ~ +122 F), IP66,Add to Compare
1.3 MP TVL resolution, HD, Digital (DSP), 0.1 lux, 12 V DC, 2.8 ~ 12, Wide Dynamic Range, 1305 × 1049, Back Light Compensation, Auto Gain Control, White Balance, 1/60 (1/50) ~ 1/60,000s, >50, 8 W, 99 x 89 x 269, 800, -30 ~ +60 C (-22 ~ +122 F), IP66,Add to Compare
1.3 MP TVL resolution, HD, Digital (DSP), Auto Iris, 0.1 lux, 12 V DC, 2.8 ~ 12, Wide Dynamic Range, 1305 x 1049, Back Light Compensation, Auto Gain Control, White Balance, 1/60 (1/50) ~ 1/60,000s, >50, 11.5 W, 99 x 89 x 269, 800, -30 ~ +60 C (-22 ~ +122 F), IP66,Add to Compare
Be it for cities, commercial, industrial or power generation and distribution facilities, FLIR offers the widest spectrum of end-to-end security solutions, answering the security monitoring needs of businesses of any size. Security cameras for perimeter protection and intrusion detection FLIR offers an unparalleled range of thermal and high-definition cameras, embedded with cutting edge intrusion detection analytics: FLIR’s FC-Series ID thermal cameras with on-board video analytics are easy to set up and capable of classifying human or vehicular intrusions with low false alarm rates. FC-Series ID provides a reliable thermal image in challenging imaging conditions, including total darkness, fog, and with static and moving light sources. FLIR also offers the ioi HD, a full HD Analytic IP bullet camera that combines military-grade video analytics with broadcast-quality IP camera technology. This camera features optimal picture quality in low-light and high-contrast lighting conditions coupled with high-end video analytics, ideal for perimeter and intrusion detection. FLIR’s ioi TRK is a small video encoder with built-in analytics that enables autonomous PTZ tracking with high-definition PTZ cameras and thermal Pan-Tilt cameras from FLIR. Operational scenarios include target hand-off from fixed position cameras as well as the option to click on a target from the control room to initiate tracking. Comprehensive video monitoring and management The United VMS 7.0 platform has been designed for corporations in all scales from entry-level to enterprise-grade. United VMS 7.0 provides global unified network topology, allowing users to connect multiple sites and systems utilising Latitude, Horizon, and Meridian to an aggregated system that can be controlled and monitored from a single location. Latitude is the enterprise-level IP surveillance system with forensic-quality imaging consisting of dedicated web-based and mobile client software. Latitude is a powerful VMS for organisations of all sizes. Latitude’s scalable architecture can support systems of any size or architecture. The Horizon NVR delivers best-in-class performance and stability for video installations requiring up to 100 cameras. Horizon is an ideal choice for securing high-performance small-to-medium sized business video installations with independent or multiple sites. The Meridian NVR is an enterprise grade, off-the-shelf, video surveillance system for up to 24 cameras. The system includes a network video recorder with 2TB or 4 TB of raw storage, and out-of-the-box video management software.Add to Compare
1.3 MP TVL resolution, HD, Digital (DSP), 0.1 lux, 12 V DC, 2.8 ~ 12, Wide Dynamic Range, 1305 x 1049, Back Light Compensation, Auto Gain Control, White Balance, 1/60 (1/50) ~ 1/60,000s, >50, 11.5 W, 99 x 89 x 269, 800, -30 ~ +60 C (-22 ~ +122 F), IP66,Add to Compare
2.1 MP TVL resolution, HD, Digital (DSP), Auto Iris, 0.1 lux, 12 V DC, 2.8 ~ 12, Wide Dynamic Range, 1920 x 1080, Back Light Compensation, Auto Gain Control, White Balance, 1/60 (1/50) ~ 1/60,000s, >50, 15 W, 99 x 89 x 269, 800, -30 ~ +60 C (-22 ~ +122 F), IP66,Add to Compare
2.1 MP TVL resolution, HD, Digital (DSP), Auto Iris, 0.1 lux, 12 V DC, 6 ~ 22, Wide Dynamic Range, 1920 x 1080, Back Light Compensation, Auto Gain Control, White Balance, 1/60 (1/50) ~ 1/60,000s, >50, 15 W, 99 x 89 x 269, 800, -30 ~ +60 C (-22 ~ +122 F), IP66,Add to Compare
2.1 MP TVL resolution, HD, Digital (DSP), Auto Iris, 0.1 lux, 12 V DC, Wide Dynamic Range, 1920 x 1080, Back Light Compensation, Auto Gain Control, White Balance, 1/60 (1/50) ~ 1/60,000s, >50, 15 W, 99 x 89 x 269, 800, -30 ~ +60 C (-22 ~ +122 F), IP66,Add to Compare
2.1 MP TVL resolution, HD, Digital (DSP), Auto Iris, 0.1 lux, 12 V DC, 2.8 ~ 12, Wide Dynamic Range, 1920 x 1080, Back Light Compensation, Auto Gain Control, White Balance, 1/60 (1/50) ~ 1/60,000s, >50, 15 W, 99 x 89 x 269, 800, -30 ~ +60 C (-22 ~ +122 F), IP66,Add to Compare
1/3 inch, True Day / Night, 600 TVL resolution, Digital (DSP), Infrared, 0 lux, 12 V DC, 720 x 480, Back Light Compensation, Auto Gain Control, White Balance, 1/30 ~ 1/15,000 s, > 52, Internal, NTSC, 1Vp-p Composite Output(75 ohms / BNC), 5 W, 105 x105 x 263, 800, -40 ~ +60 C (-40 ~ +140 F), IP66, 0 ~ 90Add to Compare
True Day / Night, 2 MP TVL resolution, HD, Digital (DSP), Infrared, Auto Iris, Direct Drive, 0.01 Lux @ (F1.2,AGC ON),0 Lux with IR ; 0.014 Lux @ (F1.4,AGC ON),0 Lux with IR lux, 12 V DC / 24 V AC, Motion Activated, High Speed, 2.8 ~ 12, Wide Dynamic Range, 1920 x 1080, Back Light Compensation, Auto Gain Control, White Balance, 1/25 (1/30) ~ 1/50,000s, 62dB, Internal, PAL, NTSC, Zoom, 1 Analog HD output, 7 W / 10 W, 300 x 101 x 108, 700, -30 ~ +60 C (-22 ~ +140 F), IP66Add to Compare
1/3 inch, True Day / Night, HD, Digital (DSP), Infrared, 0 lux, 12 V DC, Motion Activated, 3.6, Wide Dynamic Range, 1305 x 1049, Back Light Compensation, Auto Gain Control, White Balance, PAL: 1 / 50 ~ 1 / 50,000 s, NTSC: 1 / 60 ~ 1 / 50,000 s, > 62, Internal, PAL / NTSC, Zoom, 1Vp-p Composite Output(75 ohms / BNC), 3 W, 105 x 105 x 263, 800, -30 ~ +60 C (-22 ~ +140 F), IP66, 0 ~ 90Add to Compare
1/3 inch, True Day / Night, HD, Digital (DSP), Infrared, 0 lux, 12 V DC, Motion Activated, 2.8 ~ 12, Wide Dynamic Range, 1305 x 1049, Back Light Compensation, White Balance, PAL: 1 / 50 ~ 1 / 50,000 s, NTSC: 1 / 60 ~ 1 / 50,000 s, > 62, Internal, PAL / NTSC, Zoom, 1Vp-p Composite Output(75 ohms / BNC), 6 W, 131 x 93, 380, -30 ~ +60 C (-22 ~ +140 F), IP66, 0 ~ 90Add to Compare
1/3 inch, True Day / Night, HD, Digital (DSP), Infrared, 0 lux, 12 V DC, Motion Activated, 3.6, Wall, Wide Dynamic Range, 1305 x 1049, Back Light Compensation, Auto Gain Control, White Balance, PAL: 1 / 50 ~ 1 / 50,000 s, NTSC: 1 / 60 ~ 1 / 50,000 s, > 62, Internal, PAL / NTSC, Zoom, 1Vp-p Composite Output(75 ohms / BNC), 3 W, 115 x 89, 300, -20 ~ +60 C (-4 ~ +140 F), IP66, 0 ~ 90Add to Compare
1/3 inch, True Day / Night, 720 p TVL resolution, HD, Digital (DSP), Infrared, 0 lux, 12 V DC / 24 V AC, Motion Activated, 2.8 ~ 12, Wide Dynamic Range, 1305 x 1049, Back Light Compensation, Auto Gain Control, White Balance, PAL: 1 / 50 ~ 1 / 50,000 s, NTSC: 1 / 60 ~ 1 / 50,000 s, > 62, Internal, PAL / NTSC, Zoom, 1Vp-p Composite Output(75 ohms / BNC), 4 W, 105 x 87 x 267, 1,350, -20 ~ +60 C (-4 ~ +140 F), IP66, 0 ~ 90Add to Compare
1/3 inch, Colour, 480 TVL resolution, Auto Iris, Direct Drive, 0.72 lux, CS mount, 24 V AC, 12 V DC, 752 x 582, Back Light Compensation, Auto Gain Control, White Balance, 0.45, 48, PAL, 4 W, 55 x 40 x 112.4, 280, -10 ~ +50, 0 ~ 80Add to Compare
Safety applications exist in any industry where protection of lives and assets is of importance and where an early warning of a potential critical condition is of utmost importance. Thanks to FLIR A3xx-Series thermal imaging cameras these environments can be very well monitored and protected. FLIR A3xx-Series thermal imaging cameras can be installed almost anywhere to monitor your critical equipment and other valuable assets. They will safeguard your plant and measure temperature differences to assess the criticality of the situation. This allows you to see problems before they become costly failures, preventing downtime, avoiding fires and enhancing worker safety. Fixed mounted thermal imaging cameras like FLIR A3xx-Series can also be installed almost anywhere to monitor production processes by detecting and measuring temperature differences and visualise heat patterns. Often these cameras are installed in harsh environments. In order to increase protection against environmental influences, the FLIR A-Series are now available in an environmental enclosure. FLIR A300f / A310f / FLIR A315f thermal imaging cameras The main purpose of the environmental housing is to increase the environmental specification of any FLIR A3xx thermal imaging camera to IP 66 without affecting any of the features in the camera itself. Since FLIR A-Series cameras are often installed in harsh environments, the environmental housing will protect the cameras against dust or water ingress. The FLIR A300f, A310f and A315f are fixed mounted thermal imaging cameras. The A300f is available with a 25º or 45º lens. The FLIR A310f and FLIR A315f are available with a 25º, 45º or 90º lens. Users that already have a FLIR A300, A310 or A315 that needs to be extra protected against dust and water can order the housing separately as an accessory. The FLIR A300f/A310f and A315f -cameras comes with a single sensor copy of FLIR Sensors Manager. This intuitive software allows users to manage and control the camera in a TCP/IP network. FLIR A310pt The FLIR A310pt consists of a FLIR A310 thermal imaging camera and a daylight/lowlight camera that offers a 36x zoom in an environmental housing. Both are installed on a robust pan/tilt mechanism. The A310pt is able to pan 360º continuously and tilt +/- 45º. The A310pt series precision pan/tilt mechanism gives operators accurate pointing control while providing fully programmable scan patterns and slew-to-alarm functionality. FLIR A310pt is available as a standard with a 15º and 25º lens. Other fields of view exists as an option. The FLIR A310pt has all the necessary features and functions to build distributed single- or multicamera solutions to cover large areas and monitor for example coal piles and sub-stations utilising standard Ethernet hardware and software protocols. The FLIR A310pt unit offers an affordable solution for anyone who needs to solve problems demanding built-in “smartness” such as analysis and alarm functionality. The FLIR A310pt camera comes with a single sensor copy of FLIR Sensors Manager. This intuitive software allows users to manage and control the camera in a TCP/IP network.Add to Compare
1/3 inch, Colour / Monochrome, 3.0 MP TVL resolution, HD, Digital (DSP), Auto Iris, 0.02 lux, 12 V DC, Motion Activated, 3 ~ 9, Wide Dynamic Range, 2048 x 1536, White Balance, 1/6 ~ 1/8000 s, PAL/NTSC, Zoom, 6 W, 120 x 67 x 53, 470, -10 ~ +50, 20 ~ 80Add to Compare
Colour / Monochrome, 2MP TVL resolution, HD, Digital (DSP), Auto Iris, Direct Drive, 0 ~ 0.003 lux, 12 V DC, Motion Activated, Wide Dynamic Range, White Balance, 1/25(1/30) ~ 1/50,000s, Internal, PAL, NTSC, Zoom, 4 W, 87 x 82 x 226, 800, -40 ~ +60 C (-40 ~ +140 F), IP67, 0 ~ 90Add to Compare
2MP TVL resolution, HD, Digital (DSP), Auto Iris, Direct Drive, 0 ~ 0.005 lux, 12 V DC, Motion Activated, 2.8 ~ 6, Wide Dynamic Range, 1920 x 1080, Back Light Compensation, Auto Gain Control, White Balance, 1/25(1/30) ~ 1/50,000s, Internal, PAL, NTSC, 1 Analogue HD output, 3.5 W, 58 x 61 x 163, 240, -40 ~ +60 C (-40 ~ +140 F), IP67, 0 ~ 90Add to Compare
1MP TVL resolution, HD, Digital (DSP), Auto Iris, Direct Drive, 0 ~ 0.1 lux, 12 V DC, Motion Activated, 2.8 ~ 6, Wide Dynamic Range, 1296 x 732, Back Light Compensation, Auto Gain Control, White Balance, 1/25(1/30) ~ 1/50,000s, >62, Internal, PAL, NTSC, Zoom, 4 W, 70 x 150, 400, -40 ~ +60 C (-40 ~ +140 F), IP66, 0 ~ 90Add to Compare
Colour / Monochrome, 720p TVL resolution, HD, Digital (DSP), Auto Iris, Direct Drive, 0 ~ 0.1 lux, 12 V DC, Motion Activated, 3.6 ~ 16, Wide Dynamic Range, 1296 x 732, Back Light Compensation, Auto Gain Control, White Balance, 1/25(1/30) ~ 1/50,000s, >62, Internal, PAL, NTSC, Zoom, 1 Analogue HD output, 5 W, 87 x 82 x 226, 700, -40 ~ +60 C (-40 ~ +140 F), IP66, 0 ~ 90Add to Compare
Colour / Monochrome, Colour / Monochrome, 1MP TVL resolution, 1MP TVL resolution, HD, Digital (DSP), HD, Digital (DSP), Auto Iris, Auto Iris, Direct Drive, Direct Drive, 0 ~ 0.1 lux, 0 ~ 0.1 lux, 12 V DC, 12 V DC, Motion Activated, Motion Activated, 3.6 ~ 16, 3.6 ~ 16, Wide Dynamic Range, Wide Dynamic Range, 1296 x 732, 1296 x 732, Back Light Compensation, Back Light Compensation, Auto Gain Control, Auto Gain Control, White Balance, White Balance, 1/25(1/30) ~ 1/50,000s, 1/25(1/30) ~ 1/50,000s, >62, >62, Internal, Internal, PAL, NTSC, PAL, NTSC, Zoom, Zoom, 1 Analogue HD output, 1 Analogue HD output, 5 W, 5 W, 87 x 82 x 226, 87 x 82 x 226, 700, 700, -40 ~ +60 C (-40 ~ +140 F), -40 ~ +60 C (-40 ~ +140 F), IP66, IP66, 0 ~ 90, 0 ~ 90Add to Compare
Browse CCTV Cameras
- Auto Iris
CCTV camera products updated recently
Protecting against fire and security risks is an essential aspect of life for people and across all sectors. However, there is an increasing expectation and demand on fire and security providers, in areas such as education. The securitisation of our world paired with the rapid speed of communication and news updates means that young people especially have the potential to be more aware of potential dangers and threats to their own safety and the safety of those around them. Education institutions are large and sometimes sprawling sites that present considerable fire and security challenges. From kindergarten to university Each education site brings distinct challenges, with differing facilities and specialties, as well as the need to maintain the capacity of students, teachers and lecturers to study, learn and teach at the high level expected.Each education site brings distinct challenges, with differing facilities and specialties While some schools and universities are based in urban areas with a mix of heritage and high rise buildings, others are sprawled across green open spaces. Some of these sites have specialised sporting facilities, while others may be focused on engineering or scientific study, with costly technical equipment. Kindergartens and primary schools have their own unique requirements. Parents expect the highest safety standards, while schools require safety in addition to efficient facilities management. The demographic of these institutions is predominantly young children, who are often unaware of or only just learning about fire safety and personal safety. This creates a huge vulnerability and an added onus on teachers to keep their students safe. Facial recognition at West Academy of Beijing In response to this need, Chubb China upgraded the closed-circuit television (CCTV) system for Western Academy of Beijing (WAB) focusing on elevating video content analytic features, including maximised CCTV monitoring, automatic police calling, and a smart search solution. Complementing this, a facial recognition system capable of finding the exact location of a student on campus within 30 seconds was added, aided by real-time remote gate operation. This integrated and advanced system resulted won the "High Quality Educational Technology Suppliers for School" award for the WAB project at the 2019 BEED Asia Future Oriented Construction of Universities and Schools Seminar. This award recognises outstanding solution design and project execution. Parents expect the highest safety standards, while schools require safety in addition to efficient facilities management Awareness remains important at university As students graduate from kindergarten, primary school, junior and senior school, they become more aware of fire safety, relevant dangers and how to protect themselves. Unfortunately, external dangers remain. There are particularly high stakes for university campus facilities managers The safety of students in a university environment is also critical. It is often the first time young people live away from their family home and have the independence of adulthood. For this reason, there are particularly high stakes for university campus facilities managers. In the eventuality of a fire, students could be at great risk and, beyond the immediacy of physical harm, this can have serious ramifications for the reputation of an educational institution. Integrated solutions Integrated solutions must be nimble and adapted to a range of site types including campus residences, recreational areas, open spaces and lecture theatres. Chubb Sicli recently identified and overcame these challenges through the installation of a full suite of fire safety and security equipment and services at Webster University Geneva. Established in Switzerland in 1978, Webster University Geneva is an accredited American university campus that offers programs in English to students interested in undergraduate or graduate-level education. Located in the Commune of Bellevue, just a few kilometres from Geneva's central station, the campus of Webster University Geneva includes five buildings in a park-style atmosphere. Full fire and security audit Chubb Sicli provided Webster’s fire extinguisher maintenance for over 25 years. This business relationship led to a full fire and security audit that identified the need for updates to the university’s security installation. The initial audit showed several improvements to the university’s security profile were needed.The challenge was to create and provide an effective and interconnected fire and security solution The challenge was to create and provide an effective and interconnected fire and security solution, enhancing the security of the student population and its ever-evolving needs. This included complete fire detection and intruder alarms for all five buildings, upgrades to existing CCTV systems, new video surveillance equipment and an automated fire extinguishing system in the kitchen areas. In addition to this integrated system solution, Webster University required access control for all main entrances, with the requirement that all documentation to be made available in English, because Webster is an American company. Customised solution Chubb Sicli’s quality, capability, and security expertise provided a customised solution for the unique educational establishment. Not only was the solution both tailored and integrated, the approach and planning were based on audit, fire extinguisher and emergency light maintenance, fire detection, intrusion detection, access control, video surveillance and Fire Detection. Through dedicated and integrated fire safety support, Chubb provides students and families peace of mind and security. From the moment a young child enters the education system, Chubb’s diligent and effective surveillance and fire safety systems work to prevent and protect, offering a new kind of ‘end-to-end’ service for education systems around the world.
Today, the world is connected like never before. Your watch is connected to your phone, which is connected to your tablet and so on. As we’ve begun to embrace this ‘smart’ lifestyle, what we’re really embracing is the integration of systems. Why do we connect our devices? The simplest answer is that it makes life easier. But, if that’s the case, why stop at our own personal devices? Connection, when applied to a business’ operations, is no different: it lowers effort and expedites decision making. Integrating security systems Systems integration takes the idea of connected devices and applies it to an enterprise Systems integration takes the idea of connected devices and applies it to an enterprise, bringing disparate subcomponents into a single ecosystem. This could mean adding a new, overarching system to pull and collect data from existing subsystems, or adapting an existing system to serve as a data collection hub. Regardless of the method, the purpose is to create a single, unified view. Ultimately, it’s about simplifying processes, gaining actionable insights into operations and facilitating efficient decision-making. Although integration is becoming the new norm in other areas of life, businesses often opt out of integrating security systems because of misconceptions about the time and resources required to successfully make the change. So, instead of a streamlined operation, the various security systems and devices are siloed, not communicating with each other and typically being run by different teams within an organisation. Time-intensive process When systems are not integrated, companies face a wide range of risks driven by a lack of transparency and information sharing, including actual loss of property or assets. For example, a team in charge of access control is alerted to a door being opened in the middle of the night but can’t see what exactly is taking place through video surveillance. Without integrated systems they have no way of knowing if it was a burglar, an equipment malfunction or a gust of wind. Without integration between systems and teams, the ability to quickly put the right pieces in front of decision makers is missing. Instead, the team would have to go back and manually look for footage that corresponds with the time a door was open to figure out which door it was, who opened it and what happened after, which can be a time-intensive process. Integrating access control and surveillance systems Theft and vandalism occur quickly, meaning systems and users must work faster in order to prevent it This slowed response time adds risk to the system. Theft and vandalism occur quickly, meaning systems and users must work faster in order to prevent it. Security systems can do more than communicate that theft or vandalism occurred. Properly integrated, these systems alert users of pre-incident indicators before an event happens or deter events altogether. This gives teams and decision makers more time to make effective decisions. Integrating access control and surveillance systems allows for a more proactive approach. If a door is opened when it’s not supposed to be, an integrated system enables users to quickly see what door was opened, who opened it and make a quick decision. Integrated solutions are more effective, more efficient and help drive cost-saving decisions. Ideally, companies should establish integrated solutions from the start of operations. This allows companies to anticipate problems and adjust accordingly instead of reacting after an incident has occurred. Security camera system Although starting from the beginning is the best way to ensure comprehensive security, many companies have existing security systems, requiring integration and implementation to bring them together. Typically, companies with established security systems worry about the impact to infrastructure requirements. Is additional infrastructure necessary? How and where should it be added? What financial or human resources are required? These concerns drive a mentality that the benefits gained from an integrated solution aren’t worth the costs of implementation. Thankfully, this is becoming less of a problem as security providers, like Twenty20™ Solutions, work to offer adaptable solutions. With flexible options, operators don’t worry about adding or replacing infrastructure to align with a provider’s model. This allows users to monitor camera footage and gate traffic from one system If a company has an existing security camera system, but identifies a need for access control, a modern integrated solution provider can supply the gates for access points and equip the gates and cameras with the technology to connect the two. This allows users to monitor camera footage and gate traffic from one system. This model also spares operators additional costs by using a sole vendor for supplemental needs. Overall management of security While a single, unified system is beneficial for cost saving, it can also help the overall management of security. The ability to view all operating systems in one dashboard allows security personnel to manage a site from any location, reducing the expense and effort required to manage a system. The mobile world today means security directors no longer need to be in a centralised operations center to see alerts and make decisions. This simplifies processes by allowing users to quickly see an alert, pull up a camera, delete a user or check an access log from a phone. Modern networks are secure and accessible to those with permissions, without requiring those users to be physically present. Consolidating security systems is the first step companies can take toward streamlining work, information and costs. The next step is integrating all sites, both remote and on-grid. Energy and communication technology The integration of sites and systems turns mountains of data and information into actionable intelligence Traditional methods demanded two systems: one for on-grid facilities and another for off-grid locations. With advancements in energy and communication technology, the need for multiple systems is gone. Data from remote sites can be safely and securely fed into an existing system. These remote locations may gather, distribute and manage data in a different manner than a connected system due to the cost of transmission via remote connections (i.e., cellular or satellite connection). The end result, however, is a consistent and holistic view of operations for the decision maker. The integration of sites and systems turns mountains of data and information into actionable intelligence. With connected devices monitoring occurrences at individual sites, as well as events across locations, the data tells a story that is unhindered by operational silos or physical space. Identifying patterns and trends Instead of providing 10 hours-worth of footage that may or may not be relevant, system analytics can provide users with the specific set of information they need. Incidents once discarded as ‘one-off’ events can now be analysed and data-mapped to identify patterns and trends, directing future resources to the most critical areas first. Consumers are increasingly expecting everything they need to be right where they need it – and businesses are right behind them. The current generation of security professionals are increasingly expecting the simplicity of their everyday personal tasks to be mirrored in enterprise systems, which means giving them the ability to see what matters in one place. A unified system can provide just that, a single view to help simplify processes, promote cost saving and accelerate decision making.
There’s a lot of hype around the term ‘digital transformation.’ For some, it’s the integration of digital technology into everyday tasks. For others, it’s the incorporation of innovative processes aimed at making business optimisation easier. In most cases, digital transformation will fundamentally change how an organisation operates and delivers value to its customers. And within the security realm, the age of digital transformation is most certainly upon us. Technology is already a part of our day-to-day lives, with smart devices in our homes and the ability to perform tasks at our fingertips now a reality. No longer are the cloud, Internet of Things (IoT) and smart cities foreign and distant concepts full of intrigue and promise. Enhancing business operations We’re increasingly seeing devices become smarter and better able to communicate with each other These elements are increasingly incorporated into security solutions with each passing day, allowing enterprises the chance to experience countless benefits when it comes to enhancing both safety and business operations. The term ‘connected world’ is a derivative of the digital transformation, signifying the increasing reliance that we have on connectivity, smart devices and data-driven decision-making. As we become more familiar with the advantages, flaws, expectations and best practices surrounding the connected world, we can predict what issues may arise and where the market is heading. We’re increasingly seeing devices become smarter and better able to communicate with each other through the IoT to achieve both simple goals and arduous tasks. Within our homes, we’re able to control a myriad of devices with commands (‘Hey Google...’ or ‘Alexa...’), as well as recall data directly from our mobile devices, such as receiving alerts when someone rings our doorbell, there’s movement in our front yard or when a door has been unlocked. Analytics-driven solutions The focus is now shifting to the business impacts of connectivity between physical devices and infrastructures, and digital computing and analytics-driven solutions. Within physical security, connected devices can encompass a variety of sensors gathering massive amounts of data in a given timeframe: video surveillance cameras, access control readers, fire and intrusion alarms, perimeter detection and more.As the data from each of these sensors is collected and analysed through a central platform, the idea of a connected world comes to fruition, bringing situational awareness to a new level and fostering a sense of proactivity to identifying emerging threats. The connected world, however, is not without its challenges, which means that certain considerations must be made in an effort to protect data, enhance structured networking and apply protective protocols to developing technology. Physical security systems We can expect to see the conversations regarding data privacy and security increase as well As the use of connected devices and big data continue to grow, we can expect to see the conversations regarding data privacy and security increase as well. Connectivity between devices can open up the risk of cyber vulnerabilities, but designing safeguards as technology advances will lessen these risks. The key goal is to ensure that the data organisations are using for enhancement and improvements is comprehensively protected from unauthorised access. Manufacturers and integrators must be mindful of their products' capabilities and make it easy for end users to adhere to data sharing and privacy regulations. These regulations, which greatly affect physical security systems and the way they're managed, are being implemented worldwide, such as the European Union's General Data Protection Regulation (GDPR). In the United States, California, Vermont and South Carolina have followed suit, and it can be expected that more countries and U.S. states develop similar guidelines in the future. Technology is already a part of our day-to-day lives, with smart devices in our homes and the ability to perform tasks at our fingertips now a reality Automatic security updates Mitigating the concerns of the ‘connected world’ extends beyond just data privacy. IoT technology is accelerating at such a pace that it can potentially create detrimental problems for which many organisations may be ill-prepared - or may not even be able to comprehend. The opportunities presented by an influx of data and the IoT, and applying these technologies to markets such as smart cities, can solve security and operational problems, but this requires staying proactive when it comes to threats and practicing the proper protection protocols. As manufacturers develop devices that will be connected on the network, integrating standard, built-in protections becomes paramount. This can take the form of continuous vulnerability testing and regular, automatic security updates. Protocols are now being developed that are designed to ensure everything is encrypted, all communications are monitored and multiple types of attacks are considered for defensive purposes to provide the best security possible. IoT-connected devices Hackers wishing to do harm will stop at nothing to break into IoT-connected devices Built-in protection mechanisms send these kinds of systems into protection mode once they are attacked by an outside source. Another way for manufacturers to deliver solutions that are protected from outside threats is through constant and consistent testing of the devices long after they are introduced to the market. Hackers wishing to do harm will stop at nothing to break into IoT-connected devices, taking every avenue to discover vulnerabilities. But a manufacturer that spends valuable resources to continue testing and retesting products will be able to identify any issues and correct them through regular software updates and fixes. ‘IoT’ has become a common term in our vocabularies and since it’s more widely understood at this point and time, it's exciting to think about the possibilities of this revolutionary concept. Providing critical insights The number of active IoT devices is expected to grow to 22 billion by 2025 — a number that is almost incomprehensible. The rise of 5G networks, artificial intelligence (AI) and self-driving cars can be seen on the horizon of the IoT. As more of these devices are developed and security protocols are developed at a similar pace, connected devices stand to benefit a variety of industries, such as smart cities. Smart cities rely on data communicated via the IoT to enhance processes and create streamlined approaches Smart cities rely on data communicated via the IoT to enhance processes and create streamlined approaches to ensuring a city is well-run and safe. For example, think of cameras situated at a busy intersection. Cameras at these locations have a variety of uses, such as investigative purposes in the event of an accident or for issuing red-light tickets to motorists. But there are so many other possible purposes for this connected device, including providing critical insights about intersection usage and traffic congestion. These insights can then be used to adjust stoplights during busy travel times or give cities valuable data that can drive infrastructure improvements. Physical security market The impact of connected devices on cities doesn’t stop at traffic improvement. The possibilities are endless; by leveraging rich, real-time information, cities can improve efficiencies across services such as transportation, water management and healthcare. However, stringent protections are needed to harden security around the networks transmitting this kind of information in an effort to mitigate the dangers of hacking and allow this technology to continuously be improved. Whether you believe we’re in the midst of a digital transformation or have already completed it, one thing is certain: businesses must begin thinking in these connectivity-driven terms sooner rather than later so they aren’t left behind. Leveraging smart, connected devices can catapult organisations into a new level of situational awareness, but adopting protections and remaining vigilant continues to be a stalwart of technological innovation within the physical security market and into the connected world.
City deploys FLIR video system for safetyDownload
The security behind financial securityDownload
Nine ways to make your retail security system work harderDownload
Maxxess eFusion technology to be integrated along with the critical building management and security systems at Wasl Tower in Dubai
PACOM secures financial centers and ATMs of Hancock Whitney Corporation with its GMS software platform
- Maxxess eFusion technology to be integrated along with the critical building management and security systems at Wasl Tower in Dubai
- PACOM secures financial centers and ATMs of Hancock Whitney Corporation with its GMS software platform
- Dahua provides its Mobile Solution to enhance patrolling services for the Buenos Aires police
- Gallagher Security aids King's Cross Estate Services in securing the redeveloping King’s Cross, London