Teleste MCC101/201 entry level single channel H.264/MJPEG IP video server
H.264 video, audio and serial data encoder for IP/Ethernet networking systems
MCC101/201 is an entry level single channel H.264/MJPEG IP video server with audio and PTZ data transmission capability. All settings and configurations are easily managed by an ergonomic web user interface. MCC101/201 provides a fluent unicast/multicast communication over LAN/WAN Ethernet networks.
MCC101/201 is ONVIF/PSIA compatible and can operate as a part of a video management system. MCC101/201 has versatile video encoding parameters available, including resolution, frame rate and bit rate. For more technical requirements the unit has configurable settings for video profile type, de-interlacing, CBR/VBR rate control and I-frame interval.
The video operation is supported with additional features such as information display overlay and burn-in OSD to the encoded video. For alarm and event activities the MCC101/201 series has a built-in video motion detection functionality and two sensor inputs (calendar synchronised). By using an event configurator all actions of interest creating an alarm can be forwarded either to email or to ftp address. A clip from the primary or secondary video stream, or a JPEG snapshot can be added as an attachment.
In addition to video features the MCC101/201 series has two data ports for PTZ camera control and serial device communication. For audio operation there are two channels that can be switched to simplex or duplex modes. Audio coding can be selected between AAC or G.711 algorithms. For recording purposes the MCC101/201 series has a file transfer support for either FTP server or to external high capacity storage device (via an USB port).
MCC101/201 is provided as a compact, small profile aluminium stand-alone housing. A wall mount is an option. Installation into a standard 19 inch rack can be also provided with an additional 1U high installation chassis having installation slots for two MCC101/201 units. MCC101/201 series units are suited for easy installations inside premises and other technical locations providing controlled environment. The nominal supply voltage for MCC101/201 series is 12 VDC and can be typically fed via a separate mains adapter. However as the MCC101/201 series is supporting PoE technology (Powered Device) the unit can be powered over the Ethernet network cabling as well.
|No of Other Outputs||2|
|Network Protocols||IPv4/v6, TCP, UDP, IGMP, ICMP, DHCP, HTTP, HTTPS, RTP, RTSP, FTP, SNMP, SMTP, UPnP, WSD, Zeroconf, NTP, DDNS|
|Resolution TVL||1920 x 1080|
|Image per second (IPS)||30|
Dimensions mm: 33 x 134 x 125
Weight g: 500
Power Consumption: 9.6 W
Voltage: 12 V DC
|Environmental Specifications||Operating Temperature oC: -10 ~ +50 C (14 ~ 122 F)|
|Additional info||Teleste MCC201 is an entry level video server for H.264/MJPEG HD and SD operations. It is also compatible with conventional analogue composite video, too. The unit supports video resolutions starting from CIF level up to 1920x1080p30 resolution. It can be taken in use either for video encoding or decoding purposes. MMC201 is ONVIF/PSIA compatible and can operate as a part of a video management system. In addition to video features MCC201 has two data ports for PTZ camera control and serial device communication. For audio operation there are two channels that can be switched to simplex or duplex modes. For alarm and event activities MCC201 has a built-in video motion detection functionality and two sensor inputs (calendar synchronised).|
|Download PDF version|
More Teleste Video servers (IP transmission)
Compare Teleste MCC201 with Video servers (IP transmission) from other manufacturers
Johnson Controls’ victor video management system and VideoEdge NVRs facilitate efficient incident management
Intelligent Networks - Reducing the need for on-site maintenanceDownload