Tecnovideo’s NEW improved washer systems for CCTV camera housings

Tecnovideo offers a full range of washer systems that assure the cleaning of wash/wipe camera housings even under the hardest circumstances.

Every washer unit is provided with a watertight plastic enclosure that contains the power supply and the control board for the self-priming submersible pump located inside the tank.

The WP series washer systems are provided with a stainless steel frame, whereas the WP-SSC series washer systems are protected by a stainless steel cabinet. 

The best solution for hard environments, such as marine and deserts, in which sun, sand, salt and water can quickly damage plastic parts.

The washer systems can be controlled directly, by telemetry receiver (Tecnovideo RX250DC) or by open collector interface board.

Float switch option is now available. It prevents the pump from running dry and then burning out. If the water level is too low, the float switch activates the empty tank contact alarm and turns off the pump until the tank is refilled.

• Stainless steel frame (WP) or cabinet (WP-SSC) construction
• 5, 10, 25 tank capacities
• 5, 10, 15 metres max delivery head available pumps
• Nozzle available as option (upon request)
• Low water level detector: float switch and empty tank alarm output available as options (upon request)

For further information, please visit the  WP Series page and the WP-SSC Series page on Tecnovideo's website.