An important aspect of patent is that it lends itself to deployment on PTZs and video cameras mounted on mobile platforms
Within video analytics, background modelling refers to ability to understand normal movement that may occur in a scene

PureTech Systems, an Arizona-based geospatial video analytics company, recently announced the issuance of a patent by the United States Patent Office - US Patent No 9,292,743 “Background Modelling for Fixed, Mobile, And Step-And-Stare Video Camera”.

More accurate target detection and reduction in false alarms

Within the field of video analytics, “background modelling” refers to the ability to understand normal movement that may occur in a scene, such as vegetation movement, lighting changes, flowing water or even the passing of a subway train. Having a keen understanding of the changing background, allows for more accurate target detection, and more importantly, a reduction in false alarms. One significant claim of the new patent is that no assumption about the nature of the background is required. The software and/or installer does not need to concern themselves with the type of scene for which the algorithm will be utilised.

More specifically, the pixel-based multimodal background model makes no assumption about the number of modes or functional forms of the underlying distributions while exploiting radiometric information along with gradient magnitude and orientation through one, or a host, of such models to adapt to backgrounds that change with multitude of periodicities over the same or different regions of the scene while remaining geospatial-aware.

An additional, and perhaps more important, aspect of the patent is that it lends itself to deployment on PTZs, and video cameras mounted on mobile platforms including, ground vehicles (trucks, trains, AGVs-Automated Guided Vehicles), waterborne vessels and aerial platforms (including AGVs, aerostats). The act of steering a PTZ camera, or the movement of a vehicle or platform on which a camera is mounted, results in a constantly moving background, for which this patent applies. In the same manner as the patent provides claims for a fixed scene with a changing background, it also applies to background movement induced by changing the position of the camera.

Development of new capability in video analytics

“PureTech Systems continues to be a pioneer in the development of new capability in the field of video analytics,” notes Larry Bowe, President of PureTech Systems. “As the demand for intelligent video increases, so does the complexity of the scenes and the variety of methods and platforms used to collect video data,” furthers Bowe. “These new market demands require continued research and development; which PureTech Systems continues to pursue.”

The patent, granted on March 22, 2016, has application across multiple markets, including perimeter security, defence, geo-intelligence/GEOINT applications, border, military, retail, transportation, manufacturing and consumer.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

COVID-19 worries boost prospects of touchless biometric systems
COVID-19 worries boost prospects of touchless biometric systems

Spread of the novel coronavirus has jolted awareness of hygiene as it relates to touching surfaces such as keypads. No longer in favour are contact-based modalities including use of personal identification numbers (PINs) and keypads, and the shift has been sudden and long-term. Both customers and manufacturers were taken by surprise by this aspect of the virus’s impact and are therefore scrambling for solutions. Immediate impact of the change includes suspension of time and attendance systems that are touch-based. Some two-factor authentication systems are being downgraded to RFID-only, abandoning the keypad and/or biometric components that contributed to higher security, but are now unacceptable because they involve touching. Touchless biometric systems in demand The trend has translated into a sharp decline in purchase of touch modality and a sharp increase in the demand for touchless systems, says Alex Zarrabi, President of Touchless Biometrics Systems (TBS). Biometrics solutions are being affected unequally, depending on whether they involve touch sensing, he says. Spread of the novel coronavirus has jolted awareness of hygiene as it relates to touching surfaces such as keypads “Users do not want to touch anything anymore,” says Zarrabi. “From our company’s experience, we see it as a huge catalyst for touchless suppliers. We have projects being accelerated for touchless demand and have closed a number of large contracts very fast. I’m sure it’s true for anyone who is supplying touchless solutions.” Biometric systems are also seeing the addition of thermal sensors to measure body temperature in addition to the other sensors driving the system. Fingerscans and hybrid face systems TBS offers 2D and 3D systems, including both fingerscans and hybrid face/iris systems to provide touchless identification at access control points. Contactless and hygienic, the 2D Eye system is a hybrid system that combines the convenience of facial technology with the higher security of iris recognition. The system recognises the face and then detects the iris from the face image and zeros in to scan the iris. The user experiences the system as any other face recognition system. The facial aspect quickens the process, and the iris scan heightens accuracy. TBS also offers the 2D Eye Thermo system that combines face, iris and temperature measurement using a thermal sensor module. TBS's 2D Eye Thermo system combines face, iris and temperature measurement using a thermal sensor module Another TBS system is a 3D Touchless Fingerscan system that provides accuracy and tolerance, anti-spoofing, and is resilient to water, oil, dust and dirt. The 2D+ Multispectral for fingerprints combines 2D sensing with “multispectral” subsurface identification, which is resilient to contaminants and can read fingerprints that are oily, wet, dry or damaged – or even through a latex glove. In addition, the 3D+ system by TBS provides frictionless, no-contact readings even for people going through the system in a queue. The system fills the market gap for consent-based true on-the-fly systems, says Zarrabi. The system captures properties of the hand and has applications in the COVID environment, he says. The higher accuracy and security ratings are suitable for critical infrastructure applications, and there is no contact; the system is fully hygienic. Integration with access control systems Integration of TBS biometrics with a variety of third-party access control systems is easy. A “middleware” subsystem is connected to the network. Readers are connected to the subsystem and also to the corporate access control system. An interface with the TBS subsystem coordinates with the access control system. For example, a thermal camera used as part of the biometric reader can override the green light of the access control system if a high temperature (suggesting COVID-19 infection, for example) is detected. The enrollment process is convenient and flexible and can occur at an enrollment station or at an administration desk. Remote enrollment can also be accomplished using images from a CCTV camera. All templates are encrypted. Remotely enrolled employees can have access to any location they need within minutes. The 3D+ system by TBS provides frictionless, no-contact readings even for people going through the system in a queue Although there are other touchless technologies available, they cannot effectively replace biometrics, says Zarrabi. For example, a centrally managed system that uses a Bluetooth signal from a smart phone could provide convenience, is “touchless,” and could suffice for some sites. However, the system only confirms the presence and “identity” of a smart phone – not the person who should be carrying it. “There has been a lot of curiosity about touchless, but this change is strong, and there is fear of a possible second wave of COVID-19 or a return in two or three years,” says Zarrabi. “We really are seeing customers seriously shifting to touchless.”

How to maximise your body temperature detection systems
How to maximise your body temperature detection systems

There are many companies jumping into selling temperature detection systems to the state, local governments, hospitals, airports and local businesses, but do they know how to drive one? Anyone can get behind a car and drive it into a wall by accident. The same can happen with a temperature detection system.  The first thing you should ask is “does my firm have a certified thermographer?”. If not, the firm are at risk of getting a low quality system that is being resold to make quick cash. Businesses that are doing this do not know how to operate it properly. Asking the right questions Secondly, you should ask whether the system is NDAA compliant. NDAA compliance means that your temperature detection equipment is protected by U.S. law. Does your system have a HSRP device (blackbody)? HSRP (Heat Source Reference Point) is a device that will allow the camera to detect the correct temperature a distance. Even if the room temperature does change throughout the day, treat it as a reference point for the camera to know the temperature at that distance. Can your system scan mutliple people at once? Can your system scan mutliple people at once? This is a bad question but often asked since most systems will say yes. For ease, everyone wants to scan many people at once, but the best practice according to FDA and CDC guidelines is to run one person at a time for best accuracy. Why? The HSRP (blackbody) device tells the camera what the correct temperature is at a given distance away from the camera. Every foot you are away from the HSRP device will be off by 0.1 degrees roughly. If you are in a room full of people, let's say 6, in view of the camera, every person that is not next to the HSRP device (5) will be given an inaccurate reading. Hence why it is so important to run the system correctly with just one person at a time. You will also need to follow the 6 feet rule. If you take that into consideration, one at a time at 6 feet apart, the device should tell you how you need to run the system. Sensitivity of thermal imaging Is your system’s sensor accurate enough? The FDA recommends an error of ±0.5°C or better. When looking for a system, make sure it is better than what they recommend. I would recommend ±0.3°C or better. Do not purchase a system over ±-.5°C degrees as you are doing yourself and your customers or employees an injustice.  Another thing to look at is how many pixels it can determine the temperature from. Some cameras can only tell the temperature of 6 points on the screen, whilst others can take a temperature reading from each pixel. Take a 384x288 camera, for example, which would be over 110,000 points of temperature taking on a single image.      Thermal cameras are very sensitive, so there are a lot of do’s and don’ts. For example, the system cannot see through glasses or hats. On the below image you can see a person with the visual camera on the right, whilst on the left side is through a thermal camera.  Both are pointing at the same area. It is clear the person on the left side is “invisible” to the thermal imaging camera. Demonstrating the sensitivity of thermal imaging If you are a company who wants to detect the temperature of customers or employees though the front door, window or a car window, the answer would be no. You need a clear line of sight without any interference to scan for temperatures. Other things you need to look out for is wind and distance away from the HSRP (blackbody) device. Air and distance away from the HSRP device will make the system less and less accurate the more space between the device. Air and distance away from the HSRP device will make the system less and less accurate Thermal imaging and COVID-19 If you have a clear line of sight, is there anything I need to know? The answer is yes. Reflective materials such as metal can interfere with your temperature readings. Reflective materials are easily picked up from the thermal side so pointing at a medal, glass or anything reflective can cause inaccuracies within the system. In the age of COVID-19, temperature detection systems are more important than ever. Organisations must get a system in place to help scan for high temperatures in order to reduce the spread of the virus.

What are the security challenges of the oil and gas market?
What are the security challenges of the oil and gas market?

Protecting the oil and gas market is key to a thriving economy. The list of security challenges for oil and gas requires the best technology solutions our industry has to offer, from physical barriers to video systems to cybersecurity. We asked this week’s Expert Panel Roundtable: what are the security challenges of the oil and gas market?