FLIR Systems 369 Multispectral Fixed Camera for Early Fire Detection

Technical Specification

Features:

Make: FLIR Systems
Model code: 369
Series: FLIR FH-Series R
Colour Type: Colour / Monochrome
Resolution: 640 × 512 thermal resolution

Additional info:

The FLIR FH-Series R are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide rapid visual verification of hot spots in early fire detection applications. When a hot spot or temperature change is detected, the contactless temperature measurement is sent to the operator through a connected Video Management System (VMS) for instantaneous assessment and deployment of response tactics. Custom scheduling provides security personnel the flexibility to enable and disable alarms depending on business hours and seasonality. Combining the power of thermal hot-spot detection with intelligent vehicle detection, false alarms from hot exhaust pipes can be dramatically reduced.

Contact manufacturer Contact manufacturer

Datasheet Datasheet

Make	FLIR Systems
Manufacturer	FLIR Systems
Category	CCTV>IP cameras
Model code	369
Series	FLIR FH-Series R
Colour Type	Colour / Monochrome
Resolution	640 × 512 thermal resolution
Specialist Type	Thermal
Sensitivity Lux	Color: 0.25 Lux (@ (f1.6 AGC On, 30 fps) / B/W: 0.10 Lux (@ (f1.6 AGC On, 30 fps)
Electrical Specifications	Voltage: 12 V DC / 24 V DC / 24 V AC Power Consumption: Nominal: 15 W / Heaters enabled, 12 VDC: 48 W / Heaters enabled, all other inputs: 70 W
Focal Length mm	9 mm
Network Properties	Image Frame Rate: 30 fps Interface: 100/1000 Mbps Ethernet Network Protocols: IPV4, HTTP, HTTPS, UPnP, DNS, NTP, RTSP, TCP, UDP, ICMP, IGMP, DHCP, ARP, IEEE 802.1X
Compression Type	Two independent channels of H.264/H.265 or M-JPEG (except 4K) for visible and thermal
Environmental Specifications	Protection: IP66, IP67 Operating Temperature ^oC: -40 ~ +70 C (-40 ~ +158 F) Operating Humidity %: 0 ~ 95
Additional info	The FLIR FH-Series R are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide rapid visual verification of hot spots in early fire detection applications. When a hot spot or temperature change is detected, the contactless temperature measurement is sent to the operator through a connected Video Management System (VMS) for instantaneous assessment and deployment of response tactics. Custom scheduling provides security personnel the flexibility to enable and disable alarms depending on business hours and seasonality. Combining the power of thermal hot-spot detection with intelligent vehicle detection, false alarms from hot exhaust pipes can be dramatically reduced.
Download PDF version Download PDF version