Vicon CCTV Transmitters & Controllers (3)
The VN-KEYPAD is a desk-top style multi-function system keypad designed to operate with Vicon’s ViconNet® Digital Video Management systems, including the Virtual Matrix Display Controller (allows ViconNet functioning to simulate as a traditional matrix control system). The keypad connects to ViconNet or VMDC as a serial device via its USB cable. Up to 5 keypads can connect to the same VMDC or ViconNet PC.Add to Compare
Vicon VAX-LRT2 is a long-range transmitter that set the electronic security benchmark for high frequency, long-range identification transmitters. Based upon proven contactless digital ultra high frequency (UHF) technology, the receivers interface with the Vicon VAX access control system by complying with the Wiegand communication protocol.Add to Compare
Browse CCTV Transmitters & Controllers
Telemetry transmitters and controllers products updated recently
If you’re responsible for a medium or large-sized office, it’s more important than ever that you have access to a means of ensuring people’s safety, managing risks and fraud, and protecting property. Any security system that you employ must therefore meet the most demanding commercial requirements of today’s offices, and tomorrow’s. This means thinking beyond a basic intrusion system and specifying a comprehensive solution that integrates smart features like access control, video management and intelligent video analytics. Because only then will you have security you can trust, and detection you can depend on. Reliable entry management Access control systems have been developed that guarantee reliable entry management for indoors and outdoors Access control is becoming increasingly important for ensuring the security of office buildings, but as the modern workplace evolves you’re unlikely to find a one-size-fits-all solution. Today, it’s commonplace to control entry to individual rooms or restricted areas and cater to more flexible working hours that extend beyond 9 to 5, so a modern and reliable access control system that exceeds the limitations of standard mechanical locks is indispensable. Access control systems have been developed that guarantee reliable entry management for indoors and outdoors. They use state-of-the-art readers and controllers to restrict access to certain areas, ensuring only authorised individuals can get in. With video cameras located within close proximity you can then monitor and record any unauthorised access attempts. The system can also undertake a people-count to ensure only one person has entered using a single pass. Scalable hardware components As previously mentioned, there is no one-size-fits-all system, but thanks to the scalability of the hardware components, systems can adapt to changing security requirements. For example, you can install Bosch’s Access Professional Edition (APE) software for small to medium-sized offices, then switch to the more comprehensive Access Engine (ACE) of the Building Integration System (BIS) when your security requirements grow. And, because the hardware stays the same, any adaptations are simple. APE’s ‘permanent open’ functionality allows employees and guests to enter designated areas easily and conveniently The APE software administers up to 512 readers, 10,000 cardholders and 128 cameras, making it suitable for small to medium-sized buildings. With functions like badge enrollment, entrance control monitoring and alarm management with video verification it provides a high level of security and ensures only authorised employees and visitors are able to enter certain rooms and areas. Of course, there will always be situations when, for convenience, you need certain doors to be permanently open, such as events and open days. APE’s ‘permanent open’ functionality allows employees and guests to enter designated areas easily and conveniently. Growing security needs You switch to the Bosch Building Integration System (BIS), without having to switch hardware (it stays the same, remember?). This is a software solution that manages subsystems like access control, video surveillance, fire alarm, public address or intrusion systems, all on a single platform. It is designed for offices with multiple sites and for large companies with a global presence. Bosch Building Integration System (BIS) manages subsystems like access control, video surveillance, fire alarm, public address or intrusion systems, all on a single platform The BIS Access Engine (ACE) administers up to 10,000 readers and 80 concurrent workplace clients per server, and 200,000 cardholders per AMC. An additional benefit to security officers is the ability to oversee cardholders and authorisations through the central cardholder management functionality and monitor all access events and alarms from every connected site. For consistency, multi-site cardholder information and access authorisations can be created on a central server and replicated across all connected site servers, which means the cardholder information is always up to date and available in every location. Intrusion alarm systems Bosch B Series and G Series intrusion control panels can also send personal notifications via text or email Securing all perimeter doors is vital when protecting employees, visitors and intellectual property. Doors are opened and closed countless times during business hours, and when intentionally left open, your office is vulnerable to theft, and the safety of your employees is compromised. For this reason, intrusion control panels have been developed with advanced features to ensure all perimeter doors are properly closed, even when the system is not armed. If a door remains open for a period of time (you can specify anything from one second to 60 minutes), the system can be programmed to automatically take action. For example, it can activate an audible alert at the keypad to give employees time to close the door. Then, if it is still not closed, it will send a report to a monitoring center or a text directly to the office manager, and when integrated with video it can even send an image of the incident to a mobile device. Customised intrusion systems What about people who need to access your building outside of working hours, like cleaning crews? Your intruder system allows you to customise the way it operates with a press of a button or swipe of a card. This level of control enables you to disarm specific areas, bypass points and unlock doors for cleaning crews or after-hours staff, whilst keeping server rooms, stock rooms and executive offices safe and secure. Bosch B Series and G Series intrusion control panels can also send personal notifications via text or email. You can program the panel to send you opening, closing, and other event alerts, which means you don’t have to be on-site to keep track of movements in and around your facility. Video management system A video management system will add a next level of security to your access control system Every office building has different video security requirements depending on the location, size and nature of the business. Some offices may only need basic functions such as recording and playback, whereas others may need full alarm functionalities and access to different sites. A video management system will add a next level of security to your access control system. For example, the video system can provide seamless management of digital video, audio and data across IP networks for small to large office buildings. It is fully integrated and can be scaled according to your specific requirements. The entry-level BVMS Viewer is suitable for small offices that need to access live and archived video from their recording solutions. With forensic search it enables you to access a huge recording database and scan quickly for a specific security event. For larger offices, embellished security functions for the BVMS Professional version can manage up to 2,000 cameras and offers full alarm and event management Full alarm and event management For larger offices, embellished security functions for the BVMS Professional version can manage up to 2,000 cameras and offers full alarm and event management. It’s also resilient enough to remain operative should both Management and Recording Servers fail. Large multi-national companies often need access to video surveillance systems at numerous sites, which is why BVMS Professional allows you to access live and archived video from over 10,000 sites across multiple time zones from a single BVMS server. When integrated with the BVMS Enterprise version multiple BVMS Professional systems can be connected so every office in the network can be viewed from one security center, which provides the opportunity to monitor up to 200,000 cameras, regardless of their location. Essential Video Analytics Video analytics acts as the brain of your security system, using metadata to add sense and structure to any video footage you capture If your strategy is to significantly improve levels of security, video analytics is an essential part of the plan. It acts as the brain of your security system, using metadata to add sense and structure to any video footage you capture. In effect, each video camera in your network becomes smart to the degree that it can understand and interpret what it is seeing. You simply set certain alarm rules, such as when someone approaches a perimeter fence, and video analytics alerts security personnel the moment a rule is breached. Smart analytics have been developed in two formats. Essential Video Analytics is ideal for small and medium-sized commercial buildings and can be used for advanced intrusion detection, such as loitering alarms, and identifying a person or object entering a pre-defined field. It also enables you to instantly retrieve the right footage from hours of stored video, so you can deal with potential threats the moment they happen. Essential Video Analytics also goes beyond security to help you enforce health and safety regulations such as enforcing no parking zones, detecting blocked emergency exits or ensuring no one enters or leaves a building via an emergency exit; all measures that can increase the safety of employees and visitors inside the building. Intelligent Video Analytics Intelligent Video Analytics have the unique capability of analysing video content over large distances Intelligent Video Analytics have the unique capability of analysing video content over large distances, which makes it ideally suited to more expansive office grounds or securing a perimeter fence. It can also differentiate between genuine security events and known false triggers such as snow, rain, hail and moving tree branches that can make video data far more difficult to interpret. The final piece in your security jigsaw is an intelligent camera. The latest range of Bosch ’i’ cameras have the image quality, data security measures, and bitrate reduction of <80%. And, video analytics is standard. Be prepared for what can’t be predicted. Although no-one can fully predict what kind of security-related event is around the corner, experience and expertise will help make sure you’re always fully prepared.
The term “smart city” gets thrown around a lot nowadays, but as different technologies that strive to be defined in this way are adopted by different countries globally, the meaning of this phrase gets lost in translation. The simplest way to define a “smart city” is that it is an urban area that uses different types of data collecting sensors to manage assets and resources efficiently. One of the most obvious types of “data collecting sensor” is the video camera, whether that camera is part of a city’s existing CCTV infrastructure, a camera in a shopping centre or even a police car’s dash camera. The information gathered by video cameras can be used with two purposes in mind, firstly: making people’s lives more efficient, for example by managing traffic, and secondly (and arguably more importantly): making people’s lives safer. Live streaming video all the time, everywhere In the smart and safe city, traditional record-only video cameras are of limited use. Yes, they can be used to collect video which can be used for evidence after a crime has taken place, but there is no way that this technology could help divert cars away from an accident to avoid traffic building up, or prevent a crime from taking place in the first place. However, streaming live video from a camera that isn’t connected to an infrastructure via costly fibre optic cabling has proven challenging for security professionals, law enforcement and city planners alike. This is because it isn’t viable to transmit video reliably over cellular networks, in contrast to simply receiving it. Video transmission challenges Transmitting video normally results in freezing and buffering issues which can hinder efforts to fight crime and enable flow within a city, as these services require real-time, zero latency video without delays. Therefore, special technology is required that copes with poor and varying bandwidths to allow a real-time view of any scene where cameras are present to support immediate decision making and smart city processes. The information gatheredby video cameras can beused to make people’s lives more efficient, and to make people’s lives safer There are many approaches to transmitting video over cellular. We’ve developed a specialist codec (encoding and decoding algorithm) that can provide secure and reliable video over ultra-low bandwidths and can therefore cope when networks become constrained. Another technique, which is particularly useful if streaming video from police body worn cameras or dash cams that move around, is to create a local wireless “bubble” at the scene, using Wi-Fi or mesh radio systems to provide local high-bandwidth communications that can communicate with a central location via cellular or even satellite communications. Enhanced city surveillance Live video streaming within the smart and safe city’s infrastructure means that video’s capabilities can go beyond simple evidence recording and evolve into a tool that allows operations teams to monitor and remediate against incidents as they are happening. This can be taken one step further with the deployment of facial recognition via live streaming video. Facial recognition technology can be added on to any video surveillance camera that is recording at a high enough quality to identify faces. The technology works by capturing video, streaming the live video back to a control centre and matching faces against any watch lists that the control centre owns. Importantly, the data of people who aren’t on watch lists is not stored by the technology. Identifying known criminals This technology can work to make the city safer in a number of ways. For example, facial recognition could spot a known drug dealer in a city centre where they weren’t supposed to be, or facial recognition could identify if a group of known terror suspects were visiting the same location at the same time, and this would send an alert to the police. Facial recognition technology captures and streams live back to a control centre, matching faces against any watch lists that the control centre owns In an ideal world where the police had an automated, electronic workflow, the police officer nearest to the location of the incident would be identified by GPS and would be told by the control room where to go and what to do. Most police forces aren’t quite at this technological level yet, and would probably rely on communicating via radio in order to send the nearest response team to the scene. As well as this, shopping centres could create a database from analogue records of known shoplifters to identify criminals as soon as they entered the building. This would be even more effective if run co-operatively between all shopping centres and local businesses in an area, and would not only catch any known shoplifters acting suspiciously, but would act as a deterrent from shoplifting in the first place. Live streaming for police As mentioned above, live streaming video from CCTV cameras can help the police fight crime more proactively rather than reactively. This can be enhanced even further if combined with live streaming video from police car dash cams and police body worn cameras. If video was streamed from all of these sources to a central HQ, such as a police operations centre, the force would be able to have full situational awareness throughout an incident. This would mean that, if need be, officers could be advised on the best course of action, and additional police or other emergency services could be deployed instantly if needed. Incorporated with facial recognition, this would also mean that police could instantly identify if they were dealing with known criminals or terrorists. Whilst they would still have to confirm the identity of the person with questioning or by checking their identification, this is still more streamlined than describing what a person looks like over a radio and then ops trying to manually identify if the person is on a watch list. The smart, safe city is possible today – for one, if live video streaming capabilities are deployed they can enable new levels of flow in the city. With the addition of facial recognition, cities will be safer than ever before and law enforcement and security teams will be able to proactively stop crime before it happens by deterring criminal activity from taking place at all.
The use of drones has increased dramatically in the last few years. Indeed, by 2021, the FAA says the number of small hobbyist drones in the U.S. will triple to about 3.55 million. With that growth, drone capabilities have increased while costs have decreased. For example, the DJI Phantom 4 can deliver a 2-pound payload to a target with 1.5m accuracy from 20 miles away for the less than $1000.00. This is an unprecedented capability accessible to anyone. This new technology has created an entirely new security risk for businesses and governments. Drone security risks Already, rogue groups such as ISIS have used low cost drones to carry explosives in targeted attacks. Using this same method, targeting high profile locations within our borders to create terror and panic is very possible. Security professionals and technologists are working furiously to address the gaps in drone defence. Currently, the most common technologies in use for drone detection are video, acoustic sensors, radio, and air surveillance radar. Each of these has advantages, but they also have flaws that make it difficult to detect drones in all conditions. Both optical and thermal cameras, as well as acoustic sensors, do not operate in severe weather such as fog and snow. And while radio and air surveillance radar cover a wide area of detection, they suffer from high installation costs and limiting technical challenges, such as being unable to detect low flying drones on autopilot. Compact Surveillance Radar (CSR) Compact Surveillance Radar (CSR) is a security technology addressing the problems with other types of detection. CSR, like traditional radar, has the benefit of being able to detect and track foreign objects in all weather conditions, but at a fraction of the size and cost. The compact size allows the radar to be mounted on existing structures or even trees, providing extensive perimeter defence almost anywhere that you can imagine. CSR can also filter out clutter such as birds by using an advanced algorithm reducing the number of false alarms. While the use of CSR and the other detection technologies are legal in the US and in most locations throughout the world, the response mechanisms are generally not. Current regulations in the US prohibit the use of jamming or GPS spoofing in all cases except for a few federal agencies Regulations limiting drones Current regulations in the US prohibit the use of jamming or GPS spoofing in all cases except for a few federal agencies. This makes it difficult to stop the damage that drones can cause. The FAA has put into place new regulations that limit some uses of drones. However, in most cases it is still illegal for even state or local governments to stop or interfere with drones other than to locate the operator and have them land the drone. In 2016 the first law to neutralise a drone in the United States was passed in Utah to respond to drones in wildfire areas because of their interference with airborne firefighting. This law may very well provide a model for other states dealing with drones in situations where people’s lives are being put at risk by drones. At the federal level, much effort is being put into evaluating the regulations and technology surrounding the misuse of drones. In the 2016 reauthorisation bill for the FAA, Section 2135 included a pilot program for the investigation of methods to mitigate the threat of unmanned aircraft around airports and other critical infrastructure. There are many federal agencies that are evaluating the use of a variety of technologies to respond to this threat. Both optical and thermal cameras, as well as acoustic sensors, do not operate in severe weather such as fog and snow Effective countermeasure technologies The most effective countermeasure for drones is jamming, currently off-limits to the private sector. This includes stadiums, convention centres, and other large gathering areas. A number of companies are developing new response technologies that do not require the use of jammers or hacking. Several companies have developed net guns that shoot a net at an approaching drone. These are only effective at less than 100m and frequently miss the target, especially when the drone is approaching at high speed. Several other companies have taken this method a step further, with drones that capture other drones. Once a radar detects a drone, another defence drone is launched and flies to the point of detection. Then, using video analytics it homes in on the drone and fires a net to disable the drone and take it to a safe location. While this drone capturing technique is still in its infancy, it shows a great deal of promise and will not be restricted in the same fashion as jamming. However, even this solution is difficult under current regulations, as all commercial drones in the US must be under direct control of a human operator within their line of sight. This effectively means that a drone operator is required to be on-site at all times to protect a facility, event, or persons. One thing is for certain, technology will continue to adapt and security companies will continue to invent new methods to protect their facilities and the people they are sworn to protect.
Vicon Industries, Inc., a subsidiary of Cemtrex Inc., and leading designer and manufacturer of video surveillance and access control software, hardware, and components, announced the appointment of both Andronicus Turner and Jason Lloyd as Regional Sales Managers. The appointments follow several other key additions to the Vicon team. Vicon is expanding rapidly to address escalating demand as end-users seek a reliable source of video surveillance and access control technologies fit for today’s highly dynamic environment. Work experience As Regional Sales Manager for California, Nevada, and Hawaii, Vicon was pleased to appoint Andronicus Turner. Turner has an extensive career within the industry and a demonstrated ability to nurture strong relationships with system integrators, dealers, and end-users. Before Vicon, he served as a Regional Sales Representative for Hikvision. Turner studied International Business at California State University, Northridge, and Global Management at the University of Phoenix for Business. Vicon was also pleased to appoint Jason Lloyd as Regional Sales Manager for Chicago, Northern Illinois, and Wisconsin. Lloyd has over 20 years of experience and expertise working at the dealer and integrator levels. He also brings an extensive technical history to the position, with a degree in Electrical Engineering and roles as Senior Design Engineer and Low Voltage Director. Leadership hires Vicon enable end-users to scale their security with high-performance and extraordinarily flexible security solutions These appointments follow several other recent key leadership hires. This includes Bob Germain, an industry vet who came from Hikvision to become Vicon’s Director of Hardware Management, and Rakesh Sharma, who came from Exacq to spearhead the company’s hardware engineering efforts filling the position of Director of Hardware Engineering. Recent hires also include Leland Jacobson, who serves Vicon as Regional Sales Manager covering Texas, Oklahoma, Louisiana, and Arkansas, and Bob Kriegisch, who joined Vicon’s U.S. Sales team as Regional Sales Manager covering Delaware, New Jersey, and eastern Pennsylvania. Security solutions “We are excited to continue our expansion and welcome Andronicus Turner and Jason Lloyd to the Vicon family,” said Bret McGowan, Senior Vice President, Sales, and Marketing. “Together, they bring vast technical knowledge, passion, and dedication that will lend itself immensely to customers and the team. We look forward to expanding Vicon’s security solutions account base in these regions,” added McGowan. “The growth that Vicon has achieved is a testament to its vision, product excellence, and execution,” McGowan continued. “We are excited that each of these individuals joined the Vicon team and share our mission of driving strategy and execution, to enable end-users to scale their security with high-performance and extraordinarily flexible security solutions.”
Vicon Industries, Inc., a subsidiary of Cemtrex Inc., designer and manufacturer of video surveillance and access control software, hardware, and components fills the supply gap caused by NDAA compliance and the emerging FCC ban on certain Chinese surveillance cameras and components with a sophisticated portfolio of compliant solutions. Since Congress passed the 2019 National Defence Authorisation Act (NDAA) more than two years ago, many U.S. businesses have been faced with the adversity of removing and replacing numerous components of their security system. National security risks Recently, the Federal Communications Commission proposed a ban on the use of certain telecommunications products and other electronics made by Chinese companies. The order, which cites alleged national security risks, also seeks to forbid future U.S. sales and could revoke prior authorisations. Many companies in the industry kept moving forward selling banned technology" “Prior to the recent FCC ruling, many companies in the industry kept moving forward selling banned technology because it only impacted Federal opportunities. This new FCC ruling is an upheaval event bound to once again cause a major transformation in the industry impacting every space in the market” explained Bret McGowan, Senior Vice President, Sales and Marketing for Vicon. Competitive surveillance technology The ban’s enactment will create many challenges for integrators, specifiers, and end-users. The first, finding compliant and competitive surveillance technology that does not utilise any SoC (System on Chip) components from these now-banned Chinese companies. Once dealers, integrators, and specifiers identify compliant technologies, then price, quality, and time to implement them add to the complexities. As new and stricter laws began taking effect, the engineers at Vicon worked diligently to create a camera line specifically dedicated to solving the issues their government customers and prospective clients were facing. Moreover, they wanted to ensure delivering premium quality cameras at value price points. Delivering exceptional quality Vicon’s NDAA-compliant Roughneck Camera Series is designed to deliver exceptional quality To overcome this challenge, Vicon developed the Roughneck Series. Vicon’s NDAA-compliant Roughneck Camera Series is designed to deliver exceptional quality and performance at competitive pricing. Vicon recognised that to become a potential alternative to these value brands, a new pricing strategy was needed and that’s what Vicon implemented. “Vicon is pleased to have the ability to solve the challenge of compliance with our fully NDAA-compliant Roughneck Camera Series. From vandal-proof micro-domes to robust outdoor domes, these Roughneck cameras include a variety of form factors, making them an ideal solution for any market,” shared Bob Germain, Director, Hardware Product Management, Vicon. Time-consuming installations All Roughneck cameras boast a range of distinctive features, including smart IR, durable IP67/IK10 construction, and smart H.265 encoding to reduce bandwidth and storage costs. For more cutting-edge capabilities, the Pro series adds advanced AI-driven analytics, adaptive IR for clearer images in darkness, and Starlight low-light colour imaging in the 2, 5 and 8MP dome and bullets. Vicon understands the urgency in finding solutions that integrate without stressful time-consuming installations regardless of the VMS. In addition to being certified with most major VMS systems, the Roughneck Camera Series is also ONVIF certified and seamlessly transitions into any video surveillance security operation.
Vicon Industries’ V1020-WIR-360 multi-sensor camera is designed to provide users with the straightforward installation while delivering powerful performance and quality. This exceptional camera is comprised of four independently adjustable sensors that eliminate blind spots so that users can monitor extremely wide areas, with just a single IP address and cable. V1020-WIR-360 camera The V1020-WIR-360 camera is a great addition to Vicon’s camera line, providing the widest coverage area. This powerful camera is perfect for indoor and outdoor use such as parking lots, airports, stadiums, correctional facilities, commercial building corridors, warehouses and more. The multi-sensor is available with 5 MP sensors, creating a 20 MP model, providing exceptional image quality The multi-sensor is available with 5 MP sensors, creating a 20 MP model, providing exceptional image quality for any application. Designed for both indoor and outdoor use, this durable, reliable and flexible multi-sensor camera is IK10 rated for vandal protection and IP66 to withstand the toughest of environments. Easy installation and remote configuration These multi-sensor cameras are engineered to save installers’ time, money and frustration. Traditional non-repositionable multi-sensor cameras typically require at least two individuals for installation and tedious manual adjustments of the modules to obtain the desired FOV. The V1020-WIR-360 multi-sensor camera is designed to be effortlessly configured remotely from a PC and eliminate the need of requiring multiple people for an installation. Users are provided with the freedom to change their FOV as needed, without having to worry about manual installation changes. PTZ control and 360º coverage The camera offers presets for 270⁰ or 360⁰ views, along with which, users can also create custom views through each sensor’s independent PTZ control. Additionally, they can also save up to two user-defined presets, with each camera module independently positioned and zoomed as required, providing optimal surveillance. The 270º view is commonly used in corners, such as the corner of a building. Typical installation practice for a 270º setup is to mount on the corner of a building, allowing users to view directly in-front of them and to their left and right. The fourth sensor can then be positioned as desired to provide additional coverage such as looking straight down to eliminate blind spots. Integration with Valerus and other VMS platforms The ONVIF-compliant multi-sensor cameras integrate with most major VMS platforms and Vicon’s acclaimed Valerus A 360º is ideal for wide areas and is typically mounted to a pole and used in settings such as intersections and parking lots. This view’s FOV takes all angles, also eliminating the potential of any blind spots. The ONVIF-compliant multi-sensor cameras integrate with most major VMS platforms and Vicon’s acclaimed Valerus. When integrated with Valerus, the multi-sensor camera also supports Museum Search to streamline security investigations. Starlight technology for exceptional colour images These powerful cameras also deliver fantastic detail, day or night. With True WDR, the cameras can overcome challenging lighting conditions during the day, while 131 ft of IR illumination ensures that users can see every detail, even in the darkness of the night. The standout feature of this multi-sensor camera, when compared to the competition, is the advanced starlight imaging capabilities. Starlight illumination allows users to see vivid colours and sharp details that would otherwise go unnoticed. Operators can see critical forensic details that they would otherwise miss in traditional IR black-and-white images. PoE source The camera can be powered by 24 VAC, 24 VDC or with either IEEE 802.3at (PoE+) or IEEE 802.3bt Class 5 (PoE++) Power over Ethernet. The PoE source is automatically detected with the only performance difference being the IR distance of up to 131 ft (40 m) on PoE++ and up to 98 ft (30 m) on PoE+.
14 success stories about how video technology is improving city lifeDownload
Empowering cameras with AIDownload
The rise of ethical facial recognitionDownload
Webcast: Access control integration increases security while reducing costsDownload
Anviz deploys FacePass 7 and CrossChex Standard access control solutions to help Integrate Security (Integrar Seguridad) manage multi-purpose buildings
Flock Safety launches licence plate reader cameras to monitor every vehicle in the neighbourhood for better crime detection
- Anviz deploys FacePass 7 and CrossChex Standard access control solutions to help Integrate Security (Integrar Seguridad) manage multi-purpose buildings
- Flock Safety launches licence plate reader cameras to monitor every vehicle in the neighbourhood for better crime detection
- Everbridge wins contract to support deployment of Australia’s nation-wide early warning system
- Idesco Security Key Management Service secure Evotec’s systems against cargo thefts