Speco Technologies O2i562 Intensifier® IP Ceiling Mount Camera

Technical Specification

Features:

Make: Speco Technologies
Model code: O2i562
Chip Inch Size: 1/2.8 inch
Colour Type: Colour
Resolution: 2 MP resolution

Additional info:

3.6mm pinhole lens See colour in low light without IR LEDs Supports up to Full HD resolution @ 30fps Built-in standard PoE (IEEE 802.3af) No problems caused by objects that reflect or absorb IR light sources With presets for different scenarios Attached cable (16 ft.) connects camera unit to main unit for flexible placement Wide dynamic range (WDR) operation 2-way audio communication

Contact manufacturer Contact manufacturer

Datasheet Datasheet

Make	Speco Technologies
Manufacturer	Speco Technologies
Category	CCTV>IP cameras
Model code	O2i562
Chip Inch Size	1/2.8 inch
Colour Type	Colour
Resolution	2 MP resolution
Sensitivity Lux	F1.4, Colour: 0.2 lux (Max Intensify)
Electrical Specifications	Voltage: 12 V DC, PoE Power Consumption: 4W
Focal Length mm	3.6 mm
Mount Type	Ceiling
Wide Dynamic Range	Yes
Network Properties	Image Frame Rate: 30 fps Interface: 10/100 Mbps Ethernet Network Protocols: IPv4, TCP, UDP, RTP, RTSP, HTTP, HTTPS, SMTP, FTP, DHCP, UPnP, DNS
Electronic Shutter Range	1/30 - 1/10000 sec
Compression Type	H.264 (HP/MP/BP), MJPEG
Environmental Specifications	Operating Temperature ^oC: -10 ~ +50 C (14 ~ +122 F) Operating Humidity %: 0 ~ 90
Additional info	3.6mm pinhole lens See colour in low light without IR LEDs Supports up to Full HD resolution @ 30fps Built-in standard PoE (IEEE 802.3af) No problems caused by objects that reflect or absorb IR light sources With presets for different scenarios Attached cable (16 ft.) connects camera unit to main unit for flexible placement Wide dynamic range (WDR) operation 2-way audio communication
Download PDF version Download PDF version