LifeSafety Power Security devices

NPR250-16M is a remote managed midspan injectors that provides power and pass data to PoE compliant devices, such as IP cameras, door locks, IR illuminators and other access control edge devices. It features 16 ports at 32W/port, remote power management via LAN/WAN, remote PoE shutdown per port or all ports simultaneously, and 10/100/1000 BaseT Gigabit support.

NetPower NPR500-16M is a remote managed midspan injectors provide power and pass data to PoE compliant devices, such as IP cameras, door locks, IR illuminators and other access control edge devices. It features 16 ports at 32W/port, remote power management via LAN/WAN, remote PoE shutdown per port or all ports simultaneously, and 10/100/1000 BaseT Gigabit support.

LifeSafety Power NPM130-1 is a 30W single port PoE midspan injector designed for access control and security industry applications. The NPM130 provides power and passes data for PoE compliant devices. The NPM130 complies with IEEE802.3at standard and provides up to 30W power to PoE compliant Powered Device such as IP cameras or door control devices. The NPM130 utilises 24 V AC or DC power from LifeSafety Power’s FPO series power systems, or alternatively, from AC power mains through a 24 V AC Class 2 wall adapter or exisiting CCTV power source.

LifeSafety Power NPE130-1 PoE midpsan power extractor is designed to provide 12VDC, up to a maximum of 25W output power, to a non-PoE device (e.g. camera) from a PoE source. RJ45 connectors are provided for data input and output, and two terminal strips are provided for the DC output and power level selection. The NPE130 is compatible with the IEEE802.3at standard and is capable of accepting PoE connections of Mode A, Mode B, or Mode A and B simultaneously. Operation with reverse polarity at the PoE input is also supported.

The F8 module adds 8 controlled voltage outputs with supervision to a FlexPower power supply and is typically supplied as part of a system or purchased as an expansion piece to an existing system. Each module provides 8 protected outputs, each output programmable to enable voltage on activation of the fire alarm interface (FAI), disable voltage on FAI or provide a constant output voltage.

The FLEXPOWER FPX300A/150-A8D8E2 is an offline switchmode power supply-battery charger system specifically designed for the CCTV, access control, or security segments of the lifesafety industry. Providing for system power, 8 DC lock or auxiliary power outputs, and 8 AC camera power outputs, the unit is user selectable for 12 or 24VDC and 24 or 28VAC and is configured in a painted, steel, locking enclosure with tamper switch and integral battery space.

The FLEXPOWER FPO75/150-E4 is a dual voltage offline power supply -battery charger housed in a large cabinet for expansion and maximum field configuration flexibility. Listed modular accessories include: power distribution, relay based lock control, egress lock control, secondary voltage and network connection.

The iSCAN150-8 provides eight activation inputs and eight monitored and controlled relay outputs. The managed inputs are capable of voltage or dry contact activation and the managed outputs are programmable to either of the two system voltages, fail-safe, fail-secure, fire alarm over ride, and AC loss over ride for egress lock control. Each managed output may also be individually activated or deactivated through an embedded browser interface and monitored for voltage and current values via network or internet.

The RA300 series is a 24/28 VAC, 12/10 amp rackmount power system with multiple power distribution outputs and the capability to remote power reset up to two 8 output banks with the optional network connection. Ideal for CCTV applications in retail, health care, gaming, entertainment, transportation, government and educational facilities. The RA300 series delivers maximum flexibility for large multi-camera projects by providing increased current capability and allowing the user to individually select either 24 or 28V AC across eight, sixteen, or twenty-four outputs. Each output is fused at 3A and individually protected against electrical surges or transients caused by lightning or power line disturbances.

The FLEXPOWER FPO150-E2 is an offline switchmode power supply-battery charger specifically designed for the lifesafety industry. Capable of providing two power outputs, user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. This is agency listed for access control, fire, security, CCTV, and mass notification.

The FLEXPOWER FPA300A-2A8E5 is a dual voltage, AC camera power supply system specifically designed for the CCTV segment of the lifesafety industry. Providing 16 outputs, the unit is configured in a painted, steel, locking enclosure. Each output is individually protected and selectable for 24/28VAC and provides visual indication of AC output voltage.

The FlexPower KS250-D8E2 is a dual voltage power management system which provides both 16.5V AC for Keyscan system power and 12V or 24V DC to power locks (strikes or maglocks). For Keyscan power, a 200VA transformer provides sixteen, power limited 16.5VAC sources from two separate transformer windings.

The FlexPower KS150-D8E2 is a dual voltage power management system which provides both 16.5V AC for Keyscan system power and 12V or 24V DC to power locks (strikes or maglocks). For Keyscan power, a 200VA transformer provides sixteen, power limited 16.5VAC sources from two separate transformer windings. It is agency listed for access control, fire, security, CCTV, and mass notification.

The FLEXPOWER FPO75-C8E1 is a single voltage, offline switchmode power supply-battery charger system specifically designed for the access control segment of the lifesafety industry. The unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space, and provides one power supply which can be set to 12 or 24V. Eight access controlled trigger inputs control eight relay based lock outputs, with each output programmable for fire alarm disconnect, failsafe, failsecure, or dry contact operation. This is agency listed for access control, fire, security, CCTV, and mass notification.

The FlexPower KT150-D8E2 is a dual voltage power management system which provides both 16VAC for Kantech system power and 12V or 24VDC to power locks (strikes or maglocks). One 200VA transformer powers eight power limited, class 2 outputs designated for panel power. For lock and auxiliary power circuits, the FPO DC power supply/charger provides 12 or 24VDC through eight fused, auxilliary outputs.

The LifeSafety Power FPO250-N24E1R is a notification appliance circuit (NAC) expander power supply designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The unit connects to any 12 or 24V fire alarm control panel (FACP) or operates stand-alone. The unit is configured in a red painted, steel, locking enclosure with tamper switch and integral battery space. The FPO250-N24E1R will provide regulated and filtered 24VDC power to four NAC's and two auxiliary outputs, the first being a continuous output, and the other a resettable output controlled by NAC, dry contact or voltage input.

The FLEXPOWER FPO25-E1 is an offline switchmode power supply-bat - tery charger specifically designed for the lifesafety industry. Capable of providing two power outputs, user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. This is agency listed for access control, fire, security, CCTV, and mass notification.

The FLEXPOWER FPO150-C8E1 is a single voltage, offline switchmode power supply-battery charger system specifically designed for the access control segment of the lifesafety industry. The unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space, and provides one power supply which can be set to 12 or 24V. Eight access controlled trigger inputs control eight relay based lock outputs, with each output programmable for fire alarm disconnect, fail-safe, fail-secure, or dry contact operation.

The RD150/150 series is a dual voltage 12/24VDC, 12/6 amp rackmount power system with multiple power distribution outputs specifically designed for use within the access, security, CCTV, and the mass notification segments of the life safety industry. The network option monitors, reports, and controls power system functions over a local or wide area network. Available with either two, eight, or sixteen, continuous or switched power outputs, each output is fused at 3A and individually protected against electrical surges caused by lightning or transients on the external wiring.

The FLEXPOWER FPO250-C8E1 is a single voltage, offline switchmode power supply-battery charger system specifically designed for the access control segment of the lifesafety industry. The unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space, and provides one power supply which can be set to 12 or 24V. Eight access controlled trigger inputs control eight relay based lock outputs, with each output programmable for fire alarm disconnect, fail-safe, fail-secure, or dry contact operation.

The iSCAN150-16 provides sixteen activation inputs and sixteen monitored and controlled relay outputs. The managed inputs are capable of voltage or dry contact activation and the managed outputs are programmable to either of the two system voltages, fail-safe, fail-secure, fire alarm over ride, and AC loss over ride for egress lock control. Each managed output may also be individually activated or deactivated through an embedded browser interface and monitored for voltage and current values via network or internet.

The FLEXPOWER FPO250-E2 is an offline switchmode power supply-battery charger specifically designed for the lifesafety industry. Capable of providing two power outputs, user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. This is agency listed for access control, fire, security, CCTV, and mass notification.

The FLEXPOWER FPO75/75-E2 is a dual voltage offline power supply-battery charger housed in a large cabinet for expansion and maximum field configuration flexibility. Listed modular accessories include: power distribution, relay based lock control, egress lock control, secondary voltage and network connection. Each power supply provides two pairs of outputs, each pair user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output of a pair provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. This is agency listed for access control, fire, security, CCTV, and mass notification.

The FlexPower FPO150-B100E1 is a dual voltage offline power supply-battery charger specifically designed for the lifesafety industry. Capable of providing two pairs of outputs, each pair user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output of a pair provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. This is agency listed for access control, fire, security, CCTV, and mass notification.

The FLEXPOWER FPO150/150-E4 is a dual voltage offline power supply- battery charger housed in a large cabinet for expansion and maximum field configuration flexibility. Listed modular accessories include: power distribution, relay based lock control, egress lock control, secondary voltage and network connection.

The FLEXPOWER FPO75-D8E1 is an offline switchmode power supply-battery charger system specifically designed for multi-output general purpose power distribution, that may be used to provide distributed power for access, fire and the CCTV segments of the lifesafety industry. Providing for system power and multiple auxiliary power distribution outputs, the unit is user selectable for 12 or 24VDC and is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. Each auxiliary output is programmable for continuous power output or switched (resettable) voltage output.

The FLEXPOWER FPO150-F8PE1 is an offline switchmode power supply- battery charger system specifically designed for multi-output general purpose power distribution. All class 2 distributed outputs are programmable for continuous, disabled, or enabled power output, under FAI control. The power supply board interfaces to a Lock Distribution Board F8P, which has 8 Class 2 outputs used to power electric locking devices. The F8P board also includes Fire Alarm Interface (FAI) circuitry and configurable fail-safe/fail-secure modes of operation.

The FLEXPOWER FPO250-D8E1 is an offline switchmode power supply- battery charger system specifically designed for multi-output general purpose power distribution, that may be used to provide distributed power for access, fire and the CCTV segments of the lifesafety industry. Providing for system power and multiple auxiliary power distribution outputs, the unit is user selectable for 12 or 24VDC and is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. Each auxiliary output is programmable for continuous power output or switched (resettable) voltage output.