ComNet Security monitoring system

ComNet CNFE2CL2MC is an environmentally hardened modem that supports two Ethernet channels over two twisted copper pairs or two coaxial cables at data rates of up to 91 Mbps. The fastest usable data rate is automatically selected, depending upon the copper circuit transmission distance and cable quality.

ComNet CLFE8IPS is a 8 port high-power PoE mid-span injector. It is compatible with 10/100/1000 BaseT Ethernet networks. The injector meets IEEE 802.3af and IEEE 802.3at standards and deliver up to 37W per port simultaneously on all ports without requiring power management. The PoE function can be set up with Windows GUI or use the default plug and play option. This mid-span power injector is equipped with LEDs to provide operational status.

ComNet COMPAK1EOC contains two CNFE1EOC-M modems that support Ethernet over twisted pair or coaxial cable, at data rates of up to 90 Mbps. Ethernet data may be transmitted over a telephone-grade twisted copper pair, legacy serial cabling, or standard 75 ohm coaxial cable circuits, making this unit ideal for those applications where it is desired to utilise an existing installed base of copper wiring for Ethernet transmission.

ComNet FVR10M single mini video receiver detects an AM video signal on one multimode fibre optic cable. The receiver utilises Manual Gain Control and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is only available in stand-alone configurations.

ComNet FVR21/LV dual video receiver detects two independent AM video signals in one module on two independent multimode fiber optic cables. The unit incorporates a “Loss of Video” relay for each channel. Upon loss of video signal or optical fiber break, the normally closed relay opens. The module is ideal for CCTV installations and the rack mount version can be used to double the fixed video capacity of the C1 rack for up to 28 independent video channels per card cage. The module utilises Manual Gain control.

ComNet FVR21 dual video receiver detects two independent AM video signals in one module on two independent multimode fibre optic cables. The modules utilises Manual Gain Control. The receiver is compatible with the ComNet™ FVT11M and the FVT20 dual video transmitter. Plug-and-play design ensures ease of installation. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

ComNet FVR10 single video receiver detects an AM video signal on one multimode optical fibre. The receiver utilises Manual Gain Control and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is interchangeable between stand-alone or card mount configurations.

ComNet FVT1M1/M s a video transmitters that transmit one channel of video over one optical fiber. It is available in multimode and single-mode versions. It is compatible with the FVR10C1(M,S)1, FVR20C2(M,S)2 and FVR40C4(M,S)4 series of receivers. It has a plug-and-play design that ensures ease of installation requiring no electrical or optical adjustments. Its bi-colour (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. It is ideal for mounting where space is limited or can be mounted inside equipment housing.

ComNet FVT10 single channel video transmitter supports one independent AM video signal on one independent multimode optical fibre. It is compatible with the FVR10, FVR10M, FVR11, FVR11M, FVR21 and FVR22 receivers. Plug-and-play design ensures ease of installation requiringno electrical or optical adjustments. The unit may be either wall or rack-mounted, or may be DIN-rail mounted.

ComNet FVR11M is a mini video receiver that detects an AM video signal on one multimode fiber optic cable. It utilises Automatic Gain Control (AGC) and is compatible with the ComNet FVT11M and the FVT20 transmitters. It has a plug-and-play design that ensures ease of installation requiring no electrical or optical adjustments. Its bi-colour (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. It is only available in stand-alone configurations.

ComNet FVT11MAC single mini video transmitter supports transmission of a fixed video signal using AM modulation on one multimode fibre optic cable. It is compatible with the FVR11M, FVR10M, FVR21, and FVR22 receivers. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The transmitter incorporates a bi-color (Red/Green) indicating LED for monitoring proper system operation.

ComNet FVT20 is a dual video transmitter that supports two independent AM video signals in one module on two independent multimode fiber optic cables. The module is not a multiplexer. It is ideal for CCTV installations and can be used to double the fixed video capacity of the C1 rack for up to 28 independent video channels per card cage. It is compatible with the FVR11M, FVR10M, FVR21, and FVR22 receivers. It has a plug-and-play design that ensures ease of installation requiring no electrical or optical adjustments. The transmitter incorporates a bi-colour (Red/Green) indicating LED for monitoring proper system operation. It is interchangeable between stand-alone or card mount configurations.

ComNet FVR22/LV is a dual video receiver that consists of two independent AM video fiber optic receivers in one module. It uses two independent multimode fiber optic cables to receive two separate signals from two transmitters. The module is not a multiplexer. It incorporates a “Loss of Video” relay for each channel. Upon loss of video signal or optical fiber break, the normally closed relay opens. It is ideal for CCTV installations and the rack mount version can be used to double the fixed video capacity of the C1 rack for up to 28 independent video channels per card cage. It utilise Automatic Gain Control (AGC). The receiver is compatible with the ComNet FVT11M and the FVT20 dual video transmitter. It has a plug-and-play design that ensures ease of installation. Its bi-colour (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

ComNet FVT/FVR1001(M)(S)1 is a video transmitter and receiver that supports the transmission of short-haul quality 10-bit Digitally Encoded video over one multimode or single mode optical fiber. It is universally compatible with major CCTV camera manufacturers. It has a plug-and-play design that ensures ease of installation and no electrical or optical adjustments are ever required. It has a bi-colour (Red/Green) LED indicators that are provided for rapidly ascertaining equipment operating status. It is interchangeable between stand-alone or card mount configurations.

ComNet FVT41M1 video transmitter transmits four channels of video over one optical fibre utilising state-of-the-art digital encoding and decoding for high-quality video transmission. The unit is ideal for use in unconditioned roadside or out-of-plant installations. The unit is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

ComNet FVT1001S1 video transmitter supports transmission of short-haul quality 10-bit digital video over one single mode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

ComNet FVTRM1B video receiver supports transmission of short-haul quality 10-bit digital bi-directional video or sync over one multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is interchangeable between stand-alone or card mount configurations.

ComNet FVTRS1A video transmitter supports transmission of short-haul quality 10-bit digital bi-directional video or sync over one single mode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is interchangeable between stand-alone or card mount configurations.

ComNet FVTRM1A video transmitter supports transmission of short-haul quality 10-bit digital bi-directional video or sync over one multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is interchangeable between stand-alone or card mount configurations.

ComNet FVR20C2S2 dual channel video/contact receiver supports transmission of two independent short-haul quality 10-bit digital video signals and two contact closures in the direction of the video over single mode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. The unit may be either wall or rack-mounted.

ComNet FVT1001M1 video transmitter supports transmission of short-haul quality 10-bit digital video over one multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

ComNet FVR10C1M1 1 channel video/contact receiver supports transmission of one independent short-haul quality 10-bit digital video signals and one contact closures in the direction of the video over multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. The unit may be either wall or rack-mounted.

ComNet FVT812S1 video transmitter/data transceiver transmits eight channels of video utilising state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one single mode optical fibre. The FVT812M1 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the status of the system, video and data.

ComNet FVT/FVR1014(M)(S)1 is a video transmitter/data transceiver and video receiver/data transceiver series that utilise 10-bit digital encoding and decoding for high-quality video transmission. It meets the requirements of EIA RS-250C for short-haul video transmission. It provides transmission of one independent video channel and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. It is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. It has a plug-and-play design that ensures ease of installation and no electrical or optical adjustments are ever required. Its bi-colour (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. it is interchangeable between stand-alone or card mount configurations.

ComNet FVT812M1 video transmitter/data transceiver transmits eight channels of video utilising state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one multimode optical fibre. The FVT812M1 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the status of the system, video and data.

ComNet FVT412M1 video transmitter/data transceiver transmits four channels of video utilising state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data over one multimode optical fibre. The FVT412M1 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the status of the system, video and data.

ComNet FVR40C4M4 4 channel video/contact receiver supports transmission of four independent short-haul quality 10-bit digital video signals and four contact closures in the direction of the video over multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. The unit may be either wall or rack-mounted.

ComNet Europe Ltd of Leeds in the United Kingdom, a USA-based manufacturer of fiber optic transmission and networking equipment, is introducing a video encoder/decoder designed for those applications where temperature extremes, vibration, shock, voltage transients, and humidity with condensation are present. The all-new CNVETX1 video encoder/decoder is industrially hardened for use in the most extreme operating environments. The CNVETX1 is a single channel video encoder or decoder. It accepts an incoming baseband video signal, with duplex audio, and serial data for camera PTZ control, encodes it to H.264, MPEG-4, MPEG-2, or MJPEG video compression standards, and inserts it onto an Ethernet network. The CNVETX1 is user-configurable as an encoder or decoder, or the decoding may be accomplished with the decoding software supplied. It is operable as a PoE (IEEE 802.3aF) powered device or from any source of +12 VDC, and also contains ComNet IVS software for simultaneous video streaming and onboard content management. “ComNet has gained a reputation for providing the most reliable transmission equipment available. We have become the company of choice for our Made in the USA, Lifetime Guaranteed industrially-hardened networking products. There was a gap in the generally available IP video encoding product offerings, and finding an encoder that would operate reliably in difficult industrial environments was nearly impossible,” said Steve Clarke, ComNet Europe Managing Director. “The solution was simple; we developed our own. The CNVETX1 also provides an analog video-to-IP encoding & decoding solution for use with our new NetWave™ wireless transmission products,” Clarke added. “With the introduction of the CNVETX1 hardened video encoder/decoder, we continue to round out our Ethernet offerings, and solve a multitude of challenges our customers face,” said Skip Haight, ComNet VP of Marketing. “The addition of a hardened video encoder/decoder allows our customers to build a complete solution for transporting video over any Ethernet-based network. We now can offer a complete IP video transmission solution when combined with our Ethernet switches, media converters, CopperLine®, and our new NetWave® wireless Ethernet products. ComNet now takes all of the interoperability challenges away,” Haight continued. ComNet offers an extensive line of fiber optic video and data transmission equipment as well as a line of Ethernet networking equipment that is uniquely ruggedised to meet the needs of the Security and Intelligent Transportation System markets.