ComNet FVT/FVR1014(M)(S)110-bit video transmitter/data transceiver and video receiver/data transceiver

Technical Specification

Features:

Make: ComNet
Model code: FVT/FVR1014(M)(S)1
Transmission type: Fibre Optic transmission
TX/RX: TX/RX
Bit rate Bps: 10

Additional info:

ComNet FVT/FVR1014(M)(S)1 is a video transmitter/data transceiver and video receiver/data transceiver series that utilise 10-bit digital encoding and decoding for high-quality video transmission. It meets the requirements of EIA RS-250C for short-haul video transmission. It provides transmission of one independent video channel and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. It is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. It has a plug-and-play design that ensures ease of installation and no electrical or optical adjustments are ever required. Its bi-colour (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. it is interchangeable between stand-alone or card mount configurations.

Contact manufacturer Contact manufacturer

Datasheet Datasheet

Make	ComNet
Manufacturer	ComNet Europe Ltd.
Category	CCTV>Analogue Transmission
Model code	FVT/FVR1014(M)(S)1
Transmission type	Fibre Optic transmission
TX/RX	TX/RX
Network Properties	Bit rate Bps: 10
Number of Fibres	1
Digital	Yes
Signal Mode	PAL / NTSC
Bandwidth MHz	6.5
Physical Specifications	Weight g: 900 Dimensions mm: 155 x 135 x 56
Electrical Specifications	Voltage: 8 ~ 15 V DC
Environmental Specifications	Operating Temp ^oC: -40 ~ +75 C (-40 ~ 167 F) Operating Humidity %: 0 ~ 95
Additional info	ComNet FVT/FVR1014(M)(S)1 is a video transmitter/data transceiver and video receiver/data transceiver series that utilise 10-bit digital encoding and decoding for high-quality video transmission. It meets the requirements of EIA RS-250C for short-haul video transmission. It provides transmission of one independent video channel and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. It is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. It has a plug-and-play design that ensures ease of installation and no electrical or optical adjustments are ever required. Its bi-colour (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. it is interchangeable between stand-alone or card mount configurations.
Download PDF version Download PDF version