Vicon SVFT-PRS36 SurveyorVFT Pressurized PTZ Dome

Technical Specification

Please note: this is a discontinued product.

Go to Replacement product

Vicon SVFT-PRS36 SurveyorVFT Pressurized PTZ Dome

Features:

Make: Vicon
Model code: SVFT-PRS36
Chip Inch Size: 1/4 inch
Colour Type: Colour / Monochrome
Resolution TVL: 540

Additional info:

SVFT-PRS36 from Vicon is a part of SurveyorVFT pressurized PTZ dome series. The basic SVFT-PRS provides video transmission over coaxial cable. An option is available that provides TCP/IP (ViconNet) video transmission. is designed for easy snap-in installation. The SVFT-PRS is designed for easy snap-in installation. The drive simply snaps into the housing. When removed, the housing retains all programmed functions in its on-board non-volatile memory. The customer interface board snaps down for easy access. The customer interface board is pre-wired for convenience.

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	Vicon
Manufacturer	Vicon Industries
Category	CCTV>Dome cameras
Model code	SVFT-PRS36
Chip Inch Size	1/4 inch
Colour Type	Colour / Monochrome
Resolution TVL	540
Sensitivity lux	0.5 lux
Dome Type	PTZ
Pan Speed ^o/ sec	0.1 ~ 360 ^o/ sec pan speed
Indoor/Outdoor	Outdoor
Tilt Speed ^o/ sec	0.1 ~ 150 ^o/ sec tilt speed
Mount Type	Pendant mount
Electrical Specifications	Voltage: 18 ~ 30 VAC
Focal length	3.4 ~ 119
Rotation Angles^o	360
Presets	79
Back Light Compensation	Yes
Auto Gain Control	Yes
White Balance	Yes
Electronic Shutter range	1/50 ~ 1/4K
S/ N (Signal/ Noise) Ratio dB	50
Synchronisation	Internal/External
Signal Mode	NTSC
Zoom Ratio	x36
Network Properties	Interface: RS-422/485
Physical Specifications	Weight g: 5400
Environmental Specifications	Operating Temp ^oC: -34 ~ 74 C (- 29 ~ 165 F) Operating Humidity %: 0 ~ 90 Protection: IP67
Additional info	SVFT-PRS36 from Vicon is a part of SurveyorVFT pressurized PTZ dome series. The basic SVFT-PRS provides video transmission over coaxial cable. An option is available that provides TCP/IP (ViconNet) video transmission. is designed for easy snap-in installation. The SVFT-PRS is designed for easy snap-in installation. The drive simply snaps into the housing. When removed, the housing retains all programmed functions in its on-board non-volatile memory. The customer interface board snaps down for easy access. The customer interface board is pre-wired for convenience.
Download PDF version Download PDF version