eneo CCTV Quads(1)
Browse CCTV Quads
CCTV quad products updated recently
Eneo’s high-performance, Candid bullet camera range, with integrated junction box, uses a 2MP and 3MP, 1/2,8" Sony STARVIS CMOS sensor to provide exceptional video quality in low light conditions. Candid bullet cameras There are three Candid bullet cameras in the range with built-in junction boxes. A 2MP, IP bullet (ICB-62M2712M0A) and a 3MP, IP bullet (ICB-73M2712MWA) with the newly-launched, WiFi set-up interface. A 2MP, analogue, multi-signal bullet (MCB-72M2712M0A) completes the range, offering selectable, HD-TVI, AHD, CVI, HD-SDI, EX-SDI and composite video stream options. The eneo, Candid bullet cameras have a rugged, aluminum construction, designed for tough, outdoor applications. They are weather proof-rated to IP67 and come with high-power, integrated IR illumination and a motorised, 2.7mm to 12mm, varifocal lens. They will operate at a temperature of -20°C, but have a built-in, low-energy heater which will extend the IP camera’s temperature range to -50°C and the analogue cameras temperature range to -30°C. Field and motion detection The eneo, Candid bullet camera’s integrated junction box is built in to its wall-mounting bracket. This simplifies, neatens and speeds up installation, allowing cabling from behind, directly into box. Not only does this seal the camera against dust and moisture, but it also means no cabling is visible, reducing the risk of tamper and vandalism. All cameras include onboard, micro-SD card storage; triple streams for recording and viewing; a smartphone-ready, cross web browser for remote set up; and low voltage and PoE supply. The IP cameras’ onboard, analytics include motion detection; tamper protection; trip wire; people counting; direction and field detection; defog; and vertical view. The multi-signal model includes defog, privacy masking and motion detection. Eneo’s new, Candid bullet cameras are available now through eneo’s established, UK distribution channels.
Eneo has added an integrated, compact, junction box to its bullet cameras, in the company’s high-performance Candid range. The junction box is built into the mounting bracket of the camera and removes the need for fitting a separate junction box alongside the cameras. It simplifies, neatens and speeds up fitting, helping to reduce installation costs. Eneo has three Candid bullet cameras available with the integrated junction box. The small Candid, 2MP, IP bullet (ICB-62M2712M0A); the medium sized, 3MP, IP bullet, with the ingenious, newly launched, WiFi set-up interface (ICB-73M2712MWA); and the medium sized Candid 2MP, multi-signal, bullet (MCB-72M2712M0A), which is HD-TVI, AHD, CVI, HD-SDI, EX-SDI and composite selectable. Eneo has added an integrated, compact, junction box to its bullet cameras, in the company’s high-performance Candid range Weather proof cameras All the Candid bullet cameras have tough, aluminum housings, which are weather proof-rated to IP67 and operate down to an impressive -30°C. The junction box includes all camera connections, cabled through the back of the box, which are then entirely protected and sealed against dust and moisture, once the camera is fitted to the front. The eneo Candid bullet cameras offer high-performance and are competitively priced. All three cameras feature a 1/2,8", 2MP or 3MP, Sony STARVIS CMOS sensor, providing high-quality, video images, even in low light conditions. They have powerful, integrated IR illumination; a 2.7mm to 12mm varifocal lens; onboard storage; triple streams for recording and viewing; a smartphone-ready, cross web browser for remote set up; low voltage and PoE supply; and built-in, low energy, heater. The eneo Candid bullet cameras offer high-performance and are competitively priced IP camera features The IP cameras’ onboard, analysis features include motion detection; tamper protection; trip wire; people counting; direction and field detection; defog; and vertical view. The multi-signal model includes defog, privacy masking and motion detection. Eneo’s new, Candid bullet cameras are available now through eneo’s established, UK distribution channels.
eneo’s new IER series network video recorders have an embedded Linux operating system. They comprise 4, 8 and 16 channel models of up to 5MP resolution, and 16 and 32 channel models of up to 8MP resolution. WARP-supported security integration “The IER recorders are designed to allow integrators to simply and easily fit their own hard drives to suit system requirements,” explains Jussi Simonen, Business Development Manager for eneo. “With one, two or four SATA HDD bays available, depending on the model, up to 32TB can be installed within the larger recorders. eSATA and iSCSI external storage capability can take this up by another 96TB. Our new, WARP feature also allows one ‘master’ eneo NVR to monitor and control other eneo NVRs on the same system, to create even larger, coordinated systems.” Covert camera mode and motion detection The 5MP models (the IER-25R040004A, IER-25N080004A and IER-25N100004A) feature H.264 compression; up to 128 Mbps recording throughput; 130 watts PoE budget; HDMI and VGA monitor outputs; and up to 8 alarm inputs and one alarm output. The higher spec 8MP models (the IER-38R160005A and IER-38R320005A) are 19” rack-mountable with both H.264 and H.265 compression options; up to 320 Mbps recording throughput; 130 watts PoE budget; Ultra HD HDMI and Full HD VGA monitor outputs; and 16 alarm inputs and one alarm output. All the IER recorders have CMS management software and a smartphone viewing app, covert camera mode and motion detection. eneo’s new IER series recorder range is competitively priced and available now through eneo’s UK distribution channels.
Building a safe ecosystem for visitors post COVID-19Download
Smart security cameras: excellence in retailDownload
5 reasons to integrate mobile technology into your security solutionDownload