Videcon CCTV Lenses
Sorry no products match your search. Your search criteria may have been too narrow. If you remove some of your search criteria, this may yield more productive results.
Browse CCTV Lenses
CCTV camera lens products updated recently
According to IHS Market, it is estimated that there are over 60 million security cameras in the United States, and other reports say these cameras capture more than four billion hours of footage per week. Over the last decade, IP camera technology has dominated the conversation as it has provided users with a broad offering of enhanced image quality and features. With a large percentage of existing security systems relying on analogue, many end users looking for high definition (HD) video quality have been forced to take on a complete system overhaul. Infrastructure overhaul for HD video To make the switch, customers would need to change everything, from cameras to hardware to wiring– not to mention the lengthy installation process that would ensue. IP cameras also require higher Internet speeds and more cloud space. Whether constrained by budget, bandwidth or storage, many end users have been unable to adopt this new video surveillance method.Thanks to technological advancements within the security industry, HD over Coax offers a viable solution for integrators and end users alike Thanks to technological advancements within the security industry, HD over Coax offers a viable solution for integrators and end users alike. By utilising the current Coaxial cables, this offering yields high definition video, while requiring minimal infrastructure changes and is an optimal surveillance choice for security customers. Plus, with new advancements and updates being made frequently to this technology, there is a solution for every security need. The enhanced alternative of HD over Coax has been warmly welcomed in the security industry, thanks to its simple solutions and ever-evolving features. Many new analogue HD cameras are “plug and play,” able to connect directly to existing Coaxial cables. This eliminates the need for a complete system change, creating cost-savings for the end user and an enhanced video quality offering. Easy solutions for HD video As a result, integrators can cost-effectively upgrade their customer’s surveillance solution while using their legacy infrastructure, making it an attractive option for end users and an easy sell for dealers. Latency in video is another common issue with network-based camera systems, where even the slightest delay in video surveillance can hinder security response HD over Coax cameras themselves are always expanding and evolving to meet a wide array of security needs. With the introduction of fisheye and multi-sensor cameras, users now have a multitude of coverage options, not to mention the introduction of 4K bringing resolution options to the same level as IP. Some newer technologies are even touting 4K cameras paired with 4K digital video recorders (DVRs) made specifically for analogue systems. Longer cables grant transmission for up to 1600 feet, double the distance of standard analogue solutions, and triple that of IP systems. This single cable is able to transmit both HD video and audio. Recently, broadcast quality audio over Coax has become available in limited models, a substantial improvement over older analogue technology, which was unable to transmit audio. Stopping video delay Latency in video is another common issue with network-based camera systems. Even the slightest delay in video surveillance can hinder security response. IP cameras are forced to compress and packetise their video for transmission. The outcome of this is a reduced number of images per video, which in turn causes delay. HD over Coax on the other hand, delivers an unlimited amount of HD images in real time, with smooth motion and impressive clarity. Additionally, the point-to-point transmission delivers uncompressed video free of lag. Another touted benefit is that, unlike IP networked cameras, analogue systems provide a more secure video transmission. With so much sensitive information housed on a businesses’ network, adding another point of network access through an IP camera can create concerns for cyber security risks. HD over Coax delivers an unlimited amount of HD images in real time, with smooth motion and impressive clarity Preventing network hacking With HD over Coax, the physical connections between the camera and DVR prevent network hacking. By keeping the video surveillance system offline, security professionals are able to direct their attention to the physical threats at hand, rather than having to focus on deterring cyber security risks. One of the primary difficulties of deploying HD video solutions is the fact that many older systems utilise a wide variety of HD standards and platforms. To make matters more complicated, after HD over Coax was brought to market, manufacturers raced to create their own version of this technology. Today, the most popular proprietary standards are HD-CVI, HD-TVI and AHD. However, integrators and customers found that attempting to manage multiple HD technologies proved to be near impossible.Integrators and customers found that attempting to manage multiple HD technologies proved to be near impossible Diversifying surveillance through one DVR To combat these issues, manufacturers have introduced products with more flexibility to their portfolios. One example of this is the penta-brid DVR which grants the ability to seamlessly integrate multiple technologies deployed across one application. This means that systems with diverse camera brands and technologies, such as a mix of HD-CVI, HD-TVI, AHD, analogue or IP, can be connected through one DVR. For many end users with legacy analogue systems, penta-brid DVRs give them greater freedom to choose between a variety of solutions, rather than being limited to one option. With video resolution increasing, the space needed to store the footage is similarly rising. Penta-brid technology has been able to adapt to these evolving needs, giving users ample storage space to house the HD and 4K surveillance video with some of the newest models including H.265 compression. HD casino surveillance made simple For casinos, HD images are critical for identifying unauthorised personnel and unlawful behaviours to create a safe environment for guests and staff While HD over Coax is beneficial to many end users and integrators, those in the casino and hospitality markets find it crucial. With a combination of high profile guests, large amounts of cash on hand, constant crowds and strict industry regulations, reliable video surveillance is a must. Deploying new IP systems comes at a stiff price. When looking to upgrade their video surveillance, casinos must also be mindful of the installation process. When moving to an IP-based system, ripping out old wires and replacing them with new is the standard practice. This practice can be both disruptive and costly, not to mention gaming regulations require casino activities be monitored at all times so a complete system shutdown would result in revenue loss. This cost can be hard to justify, especially when the current legacy analogue system remains in working condition with only the lower image resolution to date it. For these scenarios, the most cost-effective option is to leverage the legacy infrastructure, replace the existing cameras with new devices, and reap the benefits that HD video has to offer without any lapse in security. For casinos, HD images are critical for identifying unauthorised personnel and unlawful behaviours to create a safe environment for guests and staff. HD over Coax cameras now offer the same resolution as IP cameras with a plug and play approach, that cuts down on expense without sacrificing quality. For businesses and applications that are unable to adopt IP technology, whether it be cost or time prohibitive, HD over Coax now features most of the same benefits IP has to offer without breaking the bank. By providing clear images in real time, maximising existing infrastructure, and affording cyber security benefits, HD over Coax provides an attractive solution for many end users and integrators.
When people think of control rooms, images from James Bond movies or intense action stories come to mind. What they fail to realise is the incredible level of ergonomics, technology, precision and craftsmanship required to create a top-notch command and control room. “These are rooms of complex functionalities, where hundreds of elements must be integrated and function in sync,” says Jim Coleman, National Sales Manager, AFC Industries. Professional teams from several different industries must coordinate every single detail in order to ensure that functionality occurs each and every time. Reconfigurable furniture for control rooms AFC Industries is one company that specialises in equipping control rooms for security and other applications. AFC Industries was established in 1994 as a family-owned business that focuses on the design and construction of ergonomic products. Their height-adjustable units guarantee the right height for standing desks as well as traditional sitting levels. The company produces an array of Command and Control ergonomic security consoles and mounting solutions. Modular racking systems facilitate efficient storage of electronic and audio-visual equipment. As technology changes, older traditional consoles are no longer a necessity. Many organisations instead are choosing to use lighter, less costly, reconfigurable furniture that allows more flexibility. Command Centres need to be able to reconfigure the space at will. Because most systems are housed in secure data centres, users should be able to quickly move their positions by relocating their workstations, utilising different network connections. Simple control room features, like those addressing lighting or operator comfort, can make the difference in a correct or incorrect decision during a crisis Emergency operations centres A positive trend driving the market for control rooms is an increase in emergency operations centres (EOCs), says Randy Smith, President of Winsted. “Everybody is concerned about what happens in an emergency,” says Smith, and the centres are popping up as a tool for emergency preparedness. It’s another environment where sit-stand work stations are the rule. Winsted’s product lines include stock modular and customised elements in good-better-best categories – from basic to lots of “bells and whistles;” jobs can be configured from modular elements or customised as needed. Customised control rooms for seamless operation There is a lot at stake in control room design: Lives can depend on how effectively a control room functions in an emergency. Control rooms should seamlessly accommodate both everyday occurrences and crisis situations, says Matko Papic, Chief Technology Officer of Evans Consoles. Better-operating control rooms can increase efficiency and reduce and/or mitigate risk. Simple control room features, like those addressing lighting or operator comfort, can make the difference in a correct or incorrect decision during a crisis. Addressing operator comfort can reduce the possibility of workers’ compensation claims. End users are seeing multiple benefits of creating a better operating environment, better sightlines, more comfort and attention to ergonomics. As a fully integrated control room solutions provider, Evans Consoles approaches the needs of a control room environment beginning in the conceptual/operational planning stage. They consider broad issues such as how information will be processed, the interface between technology and operators, and the cognitive and physical interactions of operators – understanding that these factors drive the layout and function of control rooms. After analysing tasks to be performed in the environment, Evans lays out the consoles to meet those needs. Rather than a predesigned solution, each installation is tailored around a specific application. Read part 2 of our Control Rooms series here
Many end-users shell out the cash to acquire the newest high-end devices, plug in, and expect to be wowed A well-developed surveillance system can give a single security guard the power to see what otherwise might take a hundred pairs of eyes to see. But what happens when all the components are all connected and powered up, and the resulting image on the screen is, well, indiscernible, or, at the very least, terribly pixelated? Many end-users shell out the cash to acquire the newest high-end devices, plug in, and expect to be wowed. Often enough, however, what they see on the screen is not what they were expecting – and they wonder what they just paid for. In a good high-definition system, what factors actually create the best image quality? With so many variables involved, from the camera’s lens to the imaging algorithms to the monitor resolution – just to name the obvious ones – how do system integrators achieve the best on-screen images? The lens The first component to handle light from an object, this may be the one most taken for granted in cameras of any sort. (Just try scratching or cracking one and you’ll agree.) In the days of analogue cameras, it seemed that any old lens would do just fine. However, as the technology inside cameras evolved and more powerful sensors (more pixels) became available, engineers and programmers demanded more from lenses. Moreover, intelligent video content analyses would be impossible without high-accuracy lenses.In what way do lenses impact the image quality? The key factor here is light transmission. The quality of light passing through the lens itself will forever be critical to the quality of image reproduced. A lens made using ultra-precision molding aspherical technology achieves more accurate colour, better light, and clearer images. Multilayer broadband anti-reflection coating further maximises a lens's light transmission while minimising the residual reflection of light on the surface of each optical lens. Variables involved include the camera’s lens, the imaging algorithms and the monitor resolution When it comes to fabricating a megapixel lens that hits the mark, the materials used and the processes by which lenses are produced are the two most critical criteria. The materials most often used to create lenses are glass and specialised plastics. An HD lens made of ultra-low-dispersion optical glass – which, by using dispersion characteristics that are different from those of conventional optical glass – will deliver better HD performance. Machine-automated lens production using specialised plastics results in high output for camera producers, and the lenses produced are more uniform in design and quality. For an HD vari-focal lens, its image quality depends largely on the precision of the cam. The cam rotates to drive the zoom and focus lens groups forward and backward for a smooth continuity of focal length and adjustment of the focal point. A lack of precision with the cam inevitably causes an offset or tilt of the lens' optical axis during zooming and focusing, leading to a serious loss of image quality. Lens production is a delicate balancing act. The slightest errors or imperfections will be very noticeable when tested Lens production is a delicate balancing act. The slightest errors or imperfections will be very noticeable when tested. The features of a lens that affect image resolution, clarity, and contrast must be perfect. Achieving uniformity of image resolution at the centre and the edges of a lens requires high-precision machinery. And once a lens has been properly crafted, the assembly of the camera, the lens housing materials, and the alignment of the optical axis demand utmost accuracy. To put it mildly, quality control must be rigorous. Image signal processing As light passes through the lens, the sensor captures it and converts it to data. Raw RGB data is transmitted by the camera sensor and undergoes Image Signal Processing (ISP) such as noise reduction, white balance, WDR, curve correction and colour correction, etc. The data is then transformed to true colours for each pixel point, for people to see images that look “normal” to the human eye. It is the Image Signal Processing that defines the final image quality on the screen. Collecting data in different conditions is vital, for instance, outdoor data should be analysed with natural light on days with sun, overcast, rain, and fog, at dawn, at dusk, and so on. Similarly, when using cameras equipped with infrared sensors, testing the IR light signals in various conditions is necessary as well. Actual image performance depends upon variables such as low light illumination, signal to noise ratio, dynamic range of light, and more. ISP algorithms aim at increasing the signal data and decreasing noise. Cameras with Wide Dynamic Range (WDR) will yield improved video imaging with both background and foreground objects in high contrast or high-backlight environments, maximising the amount of detail in brighter and darker areas in one field-of-view. In scenes with low contrast and low light, the sensors deliver digital image signals and at the same time send some amount of digital noise that directly hinders image clarity. Three-dimensional digital noise reduction (3D DNR) removes unwanted artifacts from an image, reducing graininess. Where cloudy weather poses a challenge, auto-defogging technology helps to identify the density of fog or rain with gray-white colour ratio analysis, and imbues images with true colour reproduction. Ramping up the megapixels and frame rates yields great video, but also results in more bandwidth used and more storage occupied Matching megapixels to image quality When the factors mentioned above line up well, correlating cameras and monitors creates the best viewing experience. When a high definition camera is in place, a monitor with a high resolution will display images much more clearly. But if the monitor’s resolution is low, it will not deliver the high-quality images expected – or possible – from that HD camera. For an 8 MP camera, for instance, users do best to apply monitors with 4K × 2K resolution. Though common sense, this deserves to be mentioned because users might decide to upgrade their systems with 4K monitors, but with perhaps 1.3 MP cameras installed. In such a scenario, there’s no guarantee the on-screen image quality will automatically improve. Managing data and bandwidth In terms of a complete, high definition surveillance system, when the right factors come together and the calibrations are set, image quality – even in a standard HD 1080p setup – can be extremely good. The final piece of the puzzle is managing the data. Ramping up the megapixels and frame rates yields great video, but also results in more bandwidth used and more storage occupied. Squeezing bandwidth threatens image quality and clarity, but keeping ample room for signal transmission and storage will eventually increase the overall cost for customers. Is it possible for integrators to optimise their customer’s system and, at the same time, stay within budget constraints? Luckily, it can be done. Squeezing bandwidth threatens image quality and clarity, but keeping ample room for signal transmission and storage increases the overall cost for customers To do this, a more efficient video encoding solution would allow an improvement in compression efficiency of 40–50% over H.264. Improvements to algorithms that are adaptive to a particular scene give users control over bitrate. Another option would be to start recording video only when an event triggers an alarm, since most security guards are primarily concerned with moving objects rather than a scene’s generally stagnant background. This intelligently helps optimise bandwidth and storage consumption. Another method is to use a single panoramic or fisheye camera in place of several HD cameras for coverage – the reduced number of security devices will reduce bandwidth demands and the rate of storage consumption as well. Getting the best image quality Now let’s put this all together. Naturally, integrators and users will refer to their product specs to understand features and functions, fine-tuning each component for best results. Also, as suggested above, users should select an HD camera comprehensively in terms of lens performance, pixels, image quality, and overall system compatibility and performance. Next, matching the backend device and management platform should be carefully considered in a complete security system. Installing equipment that has been engineered for a given scene is a must, along with strategising how to get the most coverage out of the lowest number of cameras. Finally, product quality, warranty, price, and on-going customer service are all important factors that customers should take into account as well.
Shoppers in England are being told they need to cover up and wear a face covering when shopping from the 24th July, or they could face a fine of up to £100. But in many ways the responsibility to enforce this and keep the public safe is once again falling on battle wearied retailers, facilities managers, and operators of public spaces. Videcon is a British-based developer, designer, and provider of security solutions for businesses across the UK and the company has jumped to repurpose its deep learning, artificially intelligent software solutions in direct response to the Government’s announcement on Monday 13th July. Body temperature screening camera Thermi-screen, Videcon’s mass body temperature screening camera, can already pinpoint individuals in a shopping queue, or public space, containing up to 40 people, who may have an elevated temperature with ±0.3°C accuracy, but now it can also identify anyone not wearing a face covering. When triggered, the system automatically sends an alert to any designated controller or person in authority. Says Videcon’s managing director, Matt Rushall, “The message that members of the public must wear face coverings is out there but retailers and managers of public spaces are now finding, as an added burden, that they are being asked by the police and authorities to support them in upholding the law. Retailers have a duty to protect their customers and with Police, resources stretched to the limit at the moment, any technology that helps to manage enforcing the law and can make life easier and safer for all, is to be welcomed.” Crowd control camera systems Videcon is a pioneer in its field and the company already uses facial recognition and mask detection software Videcon is a pioneer in its field and the company already uses facial recognition and mask detection software in its Thermi-scan door access control panels but this is the first time deep learning AI technology has been embedded in crowd control camera systems of this type. Matt Rushall continued, “Our technology has been used by banks, airports, pharma companies and major retailers around the world and I am very excited at this new development. Thermi-Screen is an effective solution to help identify those with potentials symptoms, and our new capability for mask detection will be hugely beneficial to retailers and for the safety of staff and shoppers.” In addition to the new face coverings and mask detection feature, Videcon enhanced the system’s privacy settings which can now pixelate individuals and replace exact temperature readings with simple normal/elevated temperature messaging. Deep learning technologies This advanced privacy setting secures compliance with GDPR and ensures the maximum level of individual’s protection of information. The system comprises of a camera, a network video recorder, and a temperature calibrator. Using two camera lenses simultaneously, the system takes temperature readings from the forehead and upper region of the eye orbit. Algorithms and deep learning technologies then compare readings with other environmental factors like room temperature and direct sunlight. The accuracy of Thermi-Screen eliminates any false readings, such as a person carrying and sipping a hot drink and its fast response time reduces the need for single file detection accelerating the movement of people through a designated screening area or providing screening in public open spaces. Thermi-Screen is an effective solution to help identify those with potentials symptoms, and the new capability for mask detection will be hugely beneficial to retailers and for the safety of staff and shoppers.
Some time ago Occupi by Ocucon didn’t exist. In that time, the retail technology company has worked tirelessly to enable retailers to comply with social distancing guidelines, whilst keeping their productivity high, and shoppers’ queuing times as low as possible. Occupi by Ocucon uses technology embedded in door mounted video cameras to coordinate and control the flow of shoppers both in and out of retail stores. Aldi launched Occupi ‘traffic light’ After securing business from nearly 1,500 stores, Ocucon is surveying a market opportunity in the UK of billions. And the US, which is worth an estimated £5 billion, looks set to follow. Earlier Aldi launched the new Occupi ‘traffic light’ system in stores across the UK and Ireland in the supermarket chain’s latest measure to keep customers and their staff as safe as possible during the ongoing pandemic. Already another 150 retail multiples have contacted Ocucon in a desperate rush to place orders as crowds head to their newly re-opened stores. Authorising entry to shops Far more than a people counting system, the technology is capable of marshalling shoppers into groups as it authorises and allows entry into the store, ensuring social distancing can be followed inside. This means opening stores can accelerate the entry of shoppers in the morning before moving onto a one person out one person in strategy. The automatic shop doors will only open when the signage permits entry and the number of customers allowed in the store at any one time will be calculated based on the shop’s size and social distancing requirements – allowing people to remain two metres apart at all times. More than just people counting The system can also control the number of shoppers in a store at any one time and its deep learning algorithm is constantly analysing so it knows how many people are in store at any given time which it compares with entry and departure numbers. This results in unparalleled accuracy – something that can’t be achieved by basic in-out people counting products. Occupi by Ocucon is working with ASSA ABLOY, the UK’s supplier of physical door controls (locks, door entry and closure systems) to the retail sector, and Videcon, the UK’s manufacturer of specialist CCTV camera systems and related technologies. Solution for retail industry Gary Trotter, Ocucon’s Founder and CEO said, “We pioneered the development of Occupi by Ocucon by working together with Aldi and ASSA ABLOY. I can’t think of a time when two entirely separate, but world organisations, would throw their collective weight behind the development of a concept like this in such a short time.” He continued, “We are in the midst of an ongoing pandemic and there was an incredible spirit of collaboration and innovation in the way everyone came together. We were lucky to have a client in Aldi who asked us for help and lucky to have the technological expertise and partners to help us deliver what I believe is a truly ground breaking solution for retailers.”
The Security Event has built a platform which is truly designed by the industry, for the industry, with game-changing collaborations with manufacturers, distributors, service providers, associations and industry leaders, industry media and complementary events. Spearheading this approach, a truly outstanding group of global companies has been selected from a range of disciplines to help shape this game-changing new exhibition. The Security Event is proud to have support of its ten founding partners - Anixter, ASSA ABLOY, Avigilon, Comelit, Dahua, Honeywell, TDSi, Texecom, Tyco and Videcon. Comelit managing director Francesca Boeris commented: “Comelit are extremely excited to become a founding partner of The Security Event 2019. The events concept and UK focus aligns perfectly with Comelit’s aims moving forwards.” Notable security experts The Security Event will delivery exactly what the commercial security market has been waiting for"Andy Croston, Owner/Director at Videcon Ltd echos this sentiment, “As one of the first Founding Partners to come on board we saw the huge potential of this exhibition from the very beginning. We’re certain The Security Event will delivery exactly what the commercial security market has been waiting for." As Dahua’s UK & Ireland head of operations Ben Perkins puts it, The Security Event “Gives Dahua the opportunity to get in front of the UK market.” The event has already created a buzz within the industry and is expected to welcome over 6,000 visitors across the three days. Along with notable security experts and respected industry bodies, the event will also host around 100 security brands, including the 10 founding partners. Engaging with security professionals For these companies to come on board as founding partners reaffirms the goals of The Security Event as a concept, with a vision to create a dedicated platform that levels the playing field, enabling exhibitors, installers and end users alike to reconnect. “We believe The Security Event is exactly what the UK security industry needs and are excited to come on board as a founding partner,” says Gareth Ellams, ASSA ABLOY Group Sales Director. He continues, “At ASSA ABLOY, we are looking forward to the opportunity to engage directly with security professionals as well as end users, to present our solutions.” The Security Event is proud to host a tailored education programme, featuring professionally accredited seminars, designed specifically for UK security professionals in the trade and their end users. Innovation Theatre to host seminars All ten founding partners will be welcomed into our Innovation Theatre hosting seminars on a broad range of disciplines Delivered across three theatres, industry bodies, technology leaders and renowned experts will provide the latest industry developments and technology updates. As well as participating in the exhibition itself, all ten founding partners will be welcomed into our Innovation Theatre hosting seminars on a broad range of disciplines. Location is of huge importance to The Security Event and was a key deciding factor for many of the founding partners also. Gordon Morrison, Sales Director, Access & Video, GB, Tyco Security Products recognises that, “The opportunity to take an active role as a Founding Partner in an industry event at the location that so many of our customers consider ‘home’ was extremely welcome." John Davies, TDSi Managing Director also says: “We look forward to meeting our partners and customers in the heart of the Midlands again in 2019.” Excellent opportunity to showcase products The Security Event will be the first time a major security exhibition has been held at the NEC Birmingham for more than five years and many feel the NEC has always been the true home of UK Security. Texecom marketing director Clym Brown agrees: “We’re partnering with The Security Event because it gives us the chance to reconnect with our installer base in the Midlands and North of the country.” This event provides an excellent opportunity to showcase our security portfolio and enhance our relationships with installers" Mick Goodfellow, GM Honeywell Security EMEA also expresses his delight at joining: “This event provides an excellent opportunity to showcase our security portfolio and in a location that allows us to enhance our relationships with our installer base.” Connecting with integrators Jarod Booth, Strategic Relationship Manager of Anixter shows his support “There is a gap in terms of opportunities to connect with integrators, end-users and installers outside of London and the South of England, and we feel that the location of The Security Event will help bridge that gap.” With 10 of the world’s most recognised security brands supporting the development and launch of the first edition, the industry can be assured that The Security Event will be the place to do business going forward.
Related white papers
Making sense of today’s security camera options
How to ramp up perimeter security with license plate reader technologyDownload
Solve access control challenges in the healthcare sectorDownload
Getting the most value from Software Subscription AgreementsDownload
Shifting trends in operation centers and control rooms for 2021Download
VIVOTEK collaborates with Existo to deliver a comprehensive surveillance solution for Michigan cannabis cultivation facility
- VIVOTEK collaborates with Existo to deliver a comprehensive surveillance solution for Michigan cannabis cultivation facility
- Dahua Technology provides low-light security solutions to the New Athos Cave in Georgia
- Dallmeier deploys 19 "Safe City" segment German cities with data protection-compliant video technology
- Dahua Technology's video surveillance solution employed at Cedr Factory to improve security level