Case studies

Revader Security has supplied a fleet of over 20 re-deployable CCTV cameras to West Midlands Combined Authority (WMCA), to provide visibility of multiple major construction projects being undertaken, in anticipation of the 2022 Commonwealth Games. 2022 Commonwealth Games The Transport for West Midlands (TfWM) capital construction programme comprises several major Commonwealth Games critical projects, within the Perry Barr area, including the A34 highways scheme, Perry Barr Rail Station & B...

Boon Edam Inc., a global pioneer in security entrances and architectural revolving doors announced that IMB Bank in Australia has installed a series of Boon Edam entrances, including all-glass revolving doors, slimline optical turnstiles, and a swinging access gate at its new building in Wollongong, New South Wales. IMB moved into the new building in early 2021 and immediately sought to make the entrance open and welcoming to visitors, with entrance security inside to protect valuable data, int...

A West Columbia, South Carolina neighbourhood had been dealing with complaints from their residents. Residents were noticing vandalism happening around their community and they wanted to put an end to it. The vandalism wasn’t just bringing down their property values. Residents were concerned about the safety of themselves and their neighbours, and felt that their homes and neighbourhood were being violated. Licence plate reading camera Hoping to put a stop to the vandalism, residents re...

A busy Scottish ferry terminal has become a safer place for workers and passengers, following the installation of new state-of-art remote-operated, mobile gates at the port. SentriGates The two remote-controlled, solar-powered traffic control gates - SentriGates were installed earlier this year, to control the speed and flow of heavy goods vehicles, boarding P&O Ferries at the port, located in Cairnryan, near Stranraer, in Scotland. The SentriGates, provided by globally renowned safety an...

Cutting-edge technologies from Cognitec Systems GmbH (Cognitec) will capture biometric facial images of all relevant travellers from third countries, as part of the European Entry/Exit System (EES). Cognitec Systems GmbH was awarded the contract for the delivery of the capturing devices in Germany. FaceVACS-Entry CS devices Cognitec’s technology will be installed at border check points in all international airports and seaports in Germany. The contract initially spans four years and incl...

BriefCam, the industry’s provider of video content analytics solutions announced that its software platform is in place at the National Mall as part of a $3.3+ million technology donation led by systems integration leader Convergint. By making surveillance video footage searchable, actionable and quantifiable, BriefCam can help the National Park Service (NPS) and the United States Park Police (USPP) ensure a safe and enjoyable experience for visitors to the National Mall’s...

Crown Connects in Inverness is on a mission to reduce waste and share surplus food, toiletries, and other essentials with local people who need them. The community group’s volunteers collect supplies from food retailers, supermarkets, and households who wish to make a difference through their donations. These items are then stored in the community cupboard. To give residents the opportunity to access food supplies and other necessities conveniently, volunteers work hard to keep the commun...

“One resident who resides in an area where cameras were installed told me she’s certain they’ve made a difference. Because of this program, she can sleep better at night,” said Chief of Police Trent Page, Mount Vernon Police Department. The county seat of Jefferson County, Mount Vernon, IL is located in the state’s south-central region, just 80 miles east of St. Louis, MO. Home to approximately 15,000 residents, Mount Vernon is known as the “Festival Arts Ci...

The Japanese manufacturer has deployed thousands of Xerafy Metal Skin RFID tags at its Oita Works facility to create visibility in its WIP Management. Japan’s Mitsui Engineering & Shipbuilding (MES), a global engineering company that specializes in marine vessels, energy systems, and infrastructure, is implementing Xerafy’s Mercury Metal Skin RFID labels at its MES Oita Works facility for its work-in-process (WIP) management. Material handling equipment The MES Oita Works faci...

Novo Surgical unveiled its first-generation RFID-enabled surgical instrument prototypes, at IAHCSMM 2017, in Nashville, Tennessee, USA. The prototypes are the result of month-long research and development efforts, by Novo Surgical’s engineering and quality control teams, and using patented Xerafy RFID technology. “We’re excited to present our first-generation of smart instruments developed in collaboration with Xerafy,” said Abed Moiduddin, the Vice President (VP) of Bus...

Government regulations mandate that all bottles of solution complete a rigorous sterilisation process through an autoclave. Bottles of the solution must be sterilised at a temperature of 120°C for at least 10-15 minutes. Consequently, the production process must have strict documentation and control. If any batch is questioned in terms of having successfully completed the sterilisation process, the entire batch must be discarded. Considering a bottle of the solution may cost around $110 and...

The company is a front-runner in building materials, operating around the world. It is well known for its finished cement boards, a high-tech mix of cement and fibres. The company’s US-based Project Manager responsible for developing and deploying the Work-In-Process RFID tracking system across their 8 North-American plants shared an update about the project. Challenges In order for the solution to be successful, four specific challenges have to be addressed: Substantial losses occur...

GD Medical is a medical supply OEM for major US healthcare companies, including Johnson & Johnson, Medtronics, Medline. In early 2020, it selected Xerafy, the RFID specialist, to custom design and produce an innovative RFID label that can withstand repeated gamma-ray radiation cycles. 2020 started with a surge in demand for PPE in the face of the COVID-19 pandemic and the acute challenges of accelerated shipments to institutions. Full vertical integration from raw material to global distrib...

To keep an automotive manufacturing operation running 24 hours a day, auto manufacturers have utilised Kanban systems, lean manufacturing and just-in-time manufacturing (JIT) however these business processes require tracking of the inventory and materials within a manufacturing facility. Manufacturers that truly want to automate the replenishment process utilise automatic identification such as RFID to create real-time visibility into their manufacturing and inventory management process. One su...

Hong Kong Aircraft Engineering Company (HAECO), one of the globally renowned independent aircraft engineering and maintenance companies, implemented a solution for full tool control and prevention of Foreign Object Detection (FOD) occurrences. HAECO selected Xerafy for its track record in the aviation industry, as well as the strong market experience and capabilities that the company has demonstrated in RFID tool control for MRO and FOD. MRO services HAECO provides maintenance, repair and ove...

Officers used to spend up to 15 minutes each shift recording the serial number from every radio, shotgun, citation printer, and other equipment. Before an officer of the Richardson (Texas) Police Department goes on patrol, he or she is responsible for verifying that everything that belongs in the squad car is there. Officers spent up to 15 minutes each shift recording the serial number from every radio, shotgun, citation printer, and other piece of equipment in the vehicle. Recording serial nu...

Passive RFID tags and mobile readers are cutting 70 percent of the time needed at this French nuclear power plant to locate tool containers, and 80 percent of the time needed to prepare regulatory reports. The Fessenheim nuclear power plant in the Alsace region of France has dozens of large, portable metal containers that store maintenance tools and equipment. The containers and their tool content are subject to numerous internal and regulatory controls for tool safety and security. The facilit...

Aman Aviation plans to drive the adoption of RFID-based tool control best practices in the Indian civil aviation sector, in partnership with Dolphin RFID and Xerafy. An increasing number of aviation companies are implementing RFID for MRO Tool Control, as a way of improving safety by automating Foreign Object Debris (FOD) detection and supporting Maintenance Repair and Operations (MRO) processes. RFID-based automated tool control system Aman Aviation's automated tool control system uses RFID...

The City of Mecca selected E-vision to deploy its innovative waste collection solution alongside 15,000 rugged Micro X-II RFID tags from Xerafy activated in the field. The Saudi Arabian city of Mecca has deployed Xerafy’s Micro X-II RFID tags to successfully manage thousands of waste collection bins. Using Xerafy’s rugged tags and a software solution from E-vision, the city now has real-time visibility into its waste collection activities and vehicle fleet. Mecca was looking for a...

TPV Group has deployed Xerafy's Roswell rugged RFID tags in its manufacturing process to improve efficiency and visibility in its manufacturing processes. TPV Group supplies body and chassis assemblies, seats and seat components, engine gaskets, and automated guided vehicle (AGV) solutions to automotive manufacturers. The company operates five production sites in Slovenia as well as one in Serbia and has more than 1,200 employees. Automatic identification integrator The company engaged Sloven...

The time and cost to trace more than 300,000 surgical instruments used in the Charité CFM Facility Management have been a big challenge for a long time. Instruments are easily mixed up even when they are sterilised or laser engraved, and devices can be difficult to read when contaminated. Also, it is not easy to service the instruments properly or document the product lifecycle. In February 2016, Charité finally found the solution and successfully deployed a ground-breaking surgic...

Greenville Hospital has deployed UHF RFID to help track expensive surgical instruments and other medical equipment to reduce losses and the time spent locating them. As the largest health care system located in South Carolina, Greenville Hospital System University Medical Center count 1,268 licenced beds, and 1,250 physicians out of 10,500 employees. The hospital has implemented EPC Gen 2 RFID tags to help identify surgical probes that are often accidentally thrown away after procedures. Becaus...

German manufacturer, Rittal deployed Xerafy's durable, high-temperature RFID tags in its paint shop operations, in order to track Work-In-Process (WIP) and automate stock tracking, and re-ordering with SAP. Rittal manufactures switch cabinets, air conditioning systems, and server and network cabinets. The lack of Work-In-Process (WIP) visibility into its painting processes led to manual stock checking and sub-optimal employment of its resources. Material purchases were based on historical estim...

Columbia University's College of Dental Medicine (CDM), one of the top dental schools in the U.S., is establishing itself as a leader in the use of RFID technology to drive compliance. The school launched the RFID project in response to a change in the way it managed dental instruments. Previously, students purchased their own dental instruments and were responsible for making sure each cassette (or dental instrument set) was complete and properly sterilised. Recently, the college transitioned...

Founded in 1966, New Zealand Company Skyline Enterprises Ltd is a global leisure operator with five sites in New Zealand, Singapore, and Canada. The company operates an inventory of thousands of luge carts, a purpose-built three-wheeled cart which is gravity-fuelled, with the rider having control over speed and direction using a braking and steering system. The activity is fast-paced, with luge carts typically sustaining high levels of vibration and physical impact. As the carts are used and st...

Integro's latest heavy-duty portable power equipment is industrial IoT-ready, thanks to source-tagging with embeddable Xerafy RFID. Industrial IoT innovation With its Paramount Kit, Integro LLC, a globally renowned company in power distribution solutions, brings industrial IoT innovation to portable power and other industries, by making it possible to reliably read an RFID tag from portable power equipment. Hubbell, a globally renowned company in electrical devices, is also launching its line...

The cost of manual instrument tracking was a primary driver for Charité-Universitätsmedizin Berlin, recognised as Germany’s best hospital. The time and cost of tracking 300,000 surgical instruments were growing at an unsustainable rate. In order to properly service and document instrument lifecycles, the hospital needed a technology that could bypass the identification and reading limitation inherent in contaminated instruments, while ensuring seamless tracking operations in t...

The Mexico City Police Department will deploy Xerafy Pico and XS Dot on-metal RFID tags for a weapons tracking application, which will improve the security and accountability of its armories. Xerafy’s partner in Mexico, Ofi Equipos PC, is spearheading the project. The RFID solution was adopted in an effort to address an ongoing problem, with the loss of police department weapons. Mexico City Police Department The Mexico City Police Department employs more than 34,000 officers, as well as...