Honeywell Security Access Control Readers (116)
Long Range, Proximity, Surface mount, 559 mm read range, LED / Beep, Wiegand Interface, Clock-and-Data Interface, 12 ~ 24 V DC, 260 mA, 300 x 300 x 25.4, 1400, -30 ~ +65, 0 ~ 95, Weather-proofAdd to Compare
The OmniAssure biometric reader, part of the OmniAssure contactless smartcard reader range from Honeywell, provides a fingerprint solution for up to two fingerprints on a 1k Mifare card. Containing proven Bioscrypt fingerprint sensors, the fingerprint smart card reader is easy to install. Enrolment is easy without software. Just use the enrolment card supplied with the reader to store the fingerprint template on the user's card. Up to two fingerprints can be stored on the standard Mifare card. There is no need for extra RS485 data lines to connect multiple fingerprint readers for fingerprint template database sharing - saving costs and installation time.The reader communicates via Wiegand interface and is applicable on virtually any access control panel using Wiegand.Because of the flash-on-card design, OmniAssure readers are the easiest to use in today's market. With flash-on-card, the reader's flash firmware can be easily updated to support changing needs in security without removing the readers from the wall.Product references:MIFARE BIOMETRICS READER FOR HONEYWELL SECTOR AND FINGERPRINT:OT70HONAM: Mifare fingerprint readerOT75HONAM: Mifare fingerprint reader with keypadOFP1N26: 1k Mifare Classic PVC card, pre-programmed 26 bit number in Honeywell sector MIFARE BIOMETRICS READER FOR CARD SERIAL NUMBER AND FINGERPRINT:OT70HONAS: Mifare fingerprint readerOT75HONAS: Mifare fingerprint reader with keypadOFP1N00: 1k Mifare Classic PVC card, un-programmedAdd to Compare
Browse Access Control Readers
- Long Range
- Keypad Integrated
- Honeywell Security
Access control reader products updated recently
Q: Mr. Seiter, Mr. Ekerot, you both joined Bosch Building Technologies’ business unit Video Systems & Solutions as Senior Vice Presidents in March 2020, when the Coronavirus pandemic was just beginning. How did your business unit get through 2020? Magnus Ekerot: The crisis was also felt at Bosch. At the same time, demand has risen for solutions that keep businesses open and protect people's health. We offer corresponding video solutions that can make a significant contribution to containing the pandemic. Michael Seiter: Overall, we managed the past year well despite the challenges and have been growing again since the third quarter compared to 2019. We see good opportunities for further growth in 2021. Q: Has the Corona crisis again accelerated the development of smart technologies in the security technology market, and does the security market in contrast to most industries benefit from the crisis more than it suffers? Michael Seiter: The Corona crisis has definitely demonstrated that the future lies in data-driven solutions. Thanks to our product development strategy already being based on this, we at Bosch were very quickly able to develop new products for the ‘New Normal’ and to expand existing products accordingly. To give one or two examples: in cooperation with Philips, we very quickly developed a people counting solution for retail operations – smart Philips displays in conjunction with smart cameras from Bosch that provide protection for staff and customers. The In-Store Analytics software solution was also implemented with additional features. Shop owners can now make decisions based on customer movement data such as “Where do we position products to avoid queues or crowds?” HTD involves a touch-free monitoring system to accurately and speedily identify people with heightened skin temperature The latest highlight is the Bosch Human Skin Temperature Detection solution, in short HTD. This involves a touch-free monitoring system to accurately and speedily identify people with heightened skin temperature at control points in offices, factory floors, or airports. The benefits of previously existing solutions on the market are sometimes called into question. Competitors are often unable to deliver what they promise because, for example, the measured temperature of the skin does not correspond to the core temperature of the person, or fluctuates, due to environmental influences. Therefore, we developed a software-based solution that, in compliance with GDPR, first allows people with potentially elevated body temperatures to be filtered out, and in a second step, allows medical personnel to perform a more targeted fever measurement. Q: You see a lot of potential for the video security industry in new technologies such as Artificial Intelligence and the Internet of Things. What specific opportunities do you mean, and how are you leveraging these technologies at Bosch Building Technologies? Michael Seiter: Bosch has committed itself fully to an “AIoT” – AI meets IoT – strategy. The development of AI algorithms and software, in general, is at Bosch significantly driven in the security space. By AIoT, we specifically mean the networking of physical products and the deployment of artificial intelligence. With AI we aim to enable clients to understand events at an ever-deeper level and predict them in the future – the keyword being predictive – so that they can act proactively. This is particularly important for health and safety. An example is the Intelligent Insights solution where the user can anticipate potentially dangerous situations, for instance in maintaining social distance and a maximum number of people numbers in any one area. Q: From your point of view do you have an advantage over other suppliers when it comes to AI-based products in the video arena? Michael Seiter: The analysis and utilisation of video data have long been front and centre with us. Since 2016 we’ve been following the strategy of offering AI applications in the form of integrated intelligent video analytics as a standard in our network cameras. Data such as colour, object size, object speed, and direction are all measured. Simply put, you can say this is seeing and understanding – which is the principle behind smart security cameras. Today it’s much more a question of intelligent, data-based solutions than collecting high-quality pictures and storing them for the record. Bosch has been investing heavily in AI for years, from which we can benefit greatly in our area. In the first quarter, for example, we will launch a vehicle detector based on deep learning that is already running on our cameras. This will create significant added value for our customers in the area of intelligent traffic control. Q: Mr. Ekerot, what advantages do customers have in AI-based video security from Bosch? Magnus Ekerot: A key advantage is strong customer focus with tailored solutions that are at the same time modular and scalable through new AI algorithms A key advantage is our strong customer focus with tailored solutions that are at the same time modular and scalable through new AI algorithms. Take the example of Camera Trainer, a machine learning software that can be directly uploaded to Bosch network cameras. The camera is thus trained up on recognising objects and situations – tailored to the specific needs of our customers. If the camera detects the defined scenario, it performs a predefined action in real-time – for example, a count or an alarm. The latest example is our new camera platform Inteox. As a completely open camera platform, Inteox combines Bosch's intelligent video analytics with an open operating system. This allows programmers to develop specific software applications - or apps - for various application purposes. These can then be loaded onto cameras – the same principle as an app store for smartphones. To sum up, Bosch AI applications support customer-specific needs related to data analysis while enabling totally new applications within and beyond the video security market. Q: Can you name a specific current project where Bosch has deployed an AI-based solution? Magnus Ekerot: A current ground-breaking project using our smart cameras is being implemented as a pilot in the USA. Smart Ohio enables users to configure more intelligent traffic flows and thus ensure mobility, safety, and the efficient use of roads today and tomorrow. The new vehicle detector mentioned by Mr. Seiter also plays a central role here. Our overall goal is to provide connected smart sensor solutions for public and private transportation agencies to enable them to operate their roads safely and efficiently. The Intelligent Insights can anticipate potentially dangerous situations, for instance in maintaining social distance and a maximum number of people numbers in any one area Q: Mr. Seiter, you have been involved with the topic of mobility for some time. What experience from your previous job in the automotive business of Bosch might help you when it comes to further develop the video portfolio of Bosch Building Technologies? Michael Seiter: There's a lot to tell. First of all, the development of core algorithms for video-based solutions, whether for autonomous driving, for vehicle interior monitoring, or for our Bosch Building Technologies video systems, all come together at Bosch's Hildesheim location. This gives us considerable synergies and allows us to bring R&D results to market faster and more flexibly. Essentially, assisted driving systems use AI algorithms that process ever-increasing volumes of video data. Attempts are being made to imitate the human being and enable the vehicle to understand better the surrounding environment with its ‘eyes’. This predictive capability is especially critical with autonomous driving. For example, key questions include: “How should the car respond and what could potentially happen next?” “What kind of environment does it find itself in?” etc. There are many activities in this area at Bosch that in my new role in security we can also strongly benefit from. I am now bringing a lot of this experience and existing R&D achievements to Bosch Video Systems & Solutions, which also results in further synergies with our mobility division: At Stuttgart Airport, autonomous driving is already being implemented together with Mercedes-Benz and the parking garage operator Apcoa as part of the "Automated Valet Parking" project, or AVP for short, in which intelligent video systems from Bosch Building Technologies are making a significant contribution. Mr. Ekerot, you have a lot of experience in the video security area. Where do you position Bosch Building Technologies now in this market and what specific goals are you pursuing? Magnus Ekerot: Our clients are looking for reliable partners and products. We are a strong brand; you can rely on Bosch products. Bosch is a thought leader in video and a pioneer in AI applications in this field since 2016. Data security is everything to us: Our products conform to the EU’s GDPR regulations. Beyond that, we have an extensive camera portfolio that complies with the US National Defense Authorization Act (NDAA) for video security devices. This enables our portfolio to be deployed for example within US government buildings. We are planning to conclude more software maintenance agreements with our clients in 2021. These deliver investment and future security for our customers and include for example a ‘patch guarantee’ along with regular updates with new functionalities. This is the first step in a comprehensive plan to access new revenue channels for us and our partners delivering the best technology and excellent service to the end-user! Overall, many new products will be launched this year and this trend will intensify. Our goal is to establish new product families that follow a simple principle: “The development and delivery of disruptive, predictive video solutions that every user can trust because of the underlying sustainable forward-thinking mindset.” It’s been much discussed of late that Bosch is one of the very first companies globally that operates on a CO2-neutral basis. How does sustainability impact your business? Magnus Ekerot: IoT solutions are actually sustainable and contribute to environmental protection Our IoT solutions are actually sustainable and contribute to environmental protection. For example, our cameras are sustainable in that they remain up-to-date through software updates and needn’t be constantly exchanged for new ones. Our systems demonstrate sustainability also operationally as they can be managed remotely. System integrators don’t need to be physically present, thus avoiding unnecessary travel with its accompanying emissions. All in all, Bosch Building Technologies develops ways to accompany and support our clients in reaching their climate goals via new technologies. This can be done, for example, through improved energy efficiency, the total cost of ownership models, organising and simplifying the supply chain, and helping our customers meet their social responsibilities. The Power of Bosch helps us here to leverage company-wide research to be two steps ahead, a shade faster, when it comes to new technologies and initiatives that our and future generations will benefit from. I should also say that I am personally very proud to work for a company that set an ambitious climate goal for itself and achieved it! Can you already share a preview of your technology innovations in 2021? Michael Seiter: We see great market potential for our cameras that use artificial intelligence and can be updated flexibly throughout their lifecycles. I have already mentioned the deep learning-based vehicle detector in our cameras. More such solutions – also for other applications where object and person recognition are important – will follow in the course of the year. And the best part is: with AI, the more data we collect and the more intelligently we use it, the better the solutions become and the more added value they bring to the customer. This will revolutionise our industry! Another example is our cloud-based solutions, for example for alarm monitoring. Here, we can now also integrate third-party cameras and, building on this, offer and jointly develop our intelligent software-based solutions. This gives our customers more opportunities to take advantage of the opportunities created by AI. The trend towards integration of the various security technologies seems to be driven mostly by the rapid progress in software development. Does this affect full-range suppliers such as Bosch and what specific plans for fully integrated security solutions do you have for the future? Michael Seiter: Naturally, this suits us as a full-scope supplier. Bosch solutions are deployed in many cross-domain client projects. We have experts for the different domains under one roof and a strong brand with the same quality promise for all areas. Nevertheless, it is always also about specific domain excellence. Only when you master all different areas and have profound and proven expertise in each of them you can succeed in integrated cross-domain projects. The respective business units craft their future strategies and innovation roadmaps with this in mind – as we do in the field of Video Systems & Solutions. Our business unit offers fully integrated Bosch video solutions that can be extended and operated on open systems. This is why we drive open platforms such as Inteox, to offer customers from a wide range of industries the right solutions. Our Bosch Integration Partner Program that we launched in 2012 is also heading in this direction – every product can be integrated into multiple other systems and VMS solutions. In summary: At Bosch, we are both a one-stop-shop, but also an open-system, meaning we offer customers maximum flexibility in their choice of products and services.
If you’re a security or facilities manager, you may already be aware of the quiet revolution that’s taking place across businesses and organisations up and down the country. By the end of 2020, 20% of all ID and access control systems featured mobile capability, and this is set to increase by a further 34% over the next three years. There’s no doubt that using a smartphone or mobile device in place of traditional credential and access control is a growing trend that’s only been sped up by the pandemic. It’s true that many businesses are still very much focused on remote working, although many are now starting to implement new-and-improved strategies that are better suited to protect the workforce moving forward. Mobile ID systems As the next normal becomes clearer, businesses will be reviewing procedures such as access control, occupancy monitoring, reducing touch points and tracking visitors. Mobile ID systems are ideally suited to this task. But what are the key reasons for considering such a setup in 2021? But why is this new technology so well-suited to future-proof your physical access system, and why is it becoming so popular? Eradicating outdated legacy credentials Have you seen just how vulnerable outdated Proximity card technology can be? Low-frequency 125kHz cards can be cloned in a matter of seconds with the use of cheap, readily available tools. Despite their weaknesses, they are still used by a huge majority of businesses – big and small. All smartphones include two industry-standard features that make them perfect for operating a secure, contactless credential Replacing such a system with a mobile-enabled system is one of the best ways to increase security ten-fold. Thanks to a cloud-based infrastructure, mobile ID offers best-in-class security and cryptography. All smartphones include two industry-standard features that make them perfect for operating a secure, contactless credential. Bluetooth Smart and NFC (Near Field Communication) make them the best product to operate such a credential via a secure app. If you’re looking for best-in-class security in 2021, mobile access is most definitely the way forward. Removing touch points across the business Reducing touch points and the adoption of touchless facilities has become a key priority for businesses in the wake of COVID-19. Even as businesses start to return to the office and operate a home/office split, it will be imperative that unnecessary contact is kept to an absolute minimum between staff. The traditional issuance of identification and access control credentials can pose problems in this regard. Facility and security managers who are responsible for onboarding and processing ID have done the process face to face. Mobile access makes it possible to carry this process out without people coming into direct content. First, the security manager has access to a secure portal, allowing them to create, manage and edit credentials anywhere. They can upload and remotely transfer mobile ID and access control credentials directly to users’ smartphones over the air. Via the secure app, users can view and see their credentials and immediately begin using it for ID and access control by simply placing their smartphone over card readers. Enabling a more flexible way of working The way in which we work has changed for good. Even as people more people return to the office in 2021, a majority of businesses will be operating a home/office split indefinitely. This once again reinforces the need for a smarter, more adaptable onboarding system. Implementing mobile ID is the perfect way of doing this: over-the-air delivery of credentials and security data is now a given, helping businesses create the perfect balance between the home and the office. No longer do people have to come into the office for the onboarding process. Increasing convenience and user experience More often businesses are realising the value mobile ID can have for enhancing the work experience as well as security Ok, so mobile ID is the perfect way of increasing security and adapting workplaces to a post-COVID way of working. And we’ve not even touched on the most obvious advantage yet: Convenience. How many times have you forgotten your ID card? We’re sure it’s more times than you forget your smartphone. These powerful processors have become intertwined with the way we carry out tasks on a daily basis. They’re so vital that people will soon notice if they’ve forgotten it. From an employee’s perspective, mobile ID and access control is simple, convenient and extremely user-friendly. More and more businesses are realising the value mobile ID can have for enhancing the work experience as well as security. From the employer’s perspective, mobile ID means it’s easier for administrators to manage access and credentials. Future-proofing access control now will ensure that in the longer term, mobile ID is well worth the investment. The annual expenditure of printing ID cards and purchasing credentials can be vast, while reissuance costs can also quickly add up for larger organisations. These issues are a thing of the past for businesses using mobile ID. Mobile ID perfect tool for 2021 and beyond Until mobile ID, new and improved credentials’ main focus was on increasing security. Mobile ID not only delivers that, but it also provides a more convenient way of accessing the office in a way that’s perfectly suited to returning to the office in 2021. If there was ever a time to upgrade, now is the time. Summing up, mobile access is changing the way we access the office by: Eliminating weak links in security systems such as outdated legacy card technologies Eradicating the need for touch points across multiple areas of the workplace Enabling a smarter, more flexible approach to onboarding Increasing convenience – for both employers and employees.
Access control and door entry is a huge responsibility, and challenge, for local authorities and housing associations UK wide. For councils, they’re accountable for the security and safety of many public facilities such as leisure centres, libraries as well as residential housing developments which are often large scale and home to hundreds of people. Housing associations manage affordable rental housing which also means they’re responsible for the appropriate access control management for each individual house or flat. Technology developments have enabled better entry systems that are far more secure yet also more convenient and easier to manage. For example, with modern intercom and access control systems, remote management and communication is something that offers local authorities and housing associations features that enable them to reduce costs and cut their carbon footprints by managing multiple sites from one place. On the other hand, such technological innovation has meant that local authority and housing association specifiers and consultants now have a wide range of systems and products to choose from which can cause issues in ensuring the right system for a specific building or development is chosen. Choosing an appropritate access control system In choosing an appropriate system, local authorities and housing associations need to opt for a cost effective solution that can be easily maintained with excellent support from the manufacturer and guarantees that the system and system parts will remain supported for the duration of its expected life cycle. It is also important that the chosen system is flexible to cater for the varying needs of the tenants and visitors. Of increasing importance is the reduction of anti-social behaviour which new technology can help by providing the use of data loggers which track the use and events of a door entry system, allowing specific evidence to be located by integrating with CCTV. Using technology to our advantage Through advancements in management systems and services, we can gain a much better visual representation of the events and general usage of an intercom entry system and not just its proximity access control. Systems, for example, can now send email alarms or notifications to the administrator or management. We are now able to modify user rights and access levels on the go from a mobile app which enables a much greater control over service and maintenance engineers, such as making sure they have full access when required via an app, rather than arriving to site with the incorrect keys or access fob. Systems, for example, can now send email alarms or notifications to the administrator or management Dealing with tenant’s lost and stolen keys has never been so easy either. The blocking or deletion of lost fobs and adding a new fob can be carried out in minutes while at the same time removing the cost of sending an engineer to the development to programme new fobs. This greatly reduces the carbon footprint of the whole task as fobs can now be sent out via post to a secure location for collection. Technology has also helped local authorities and housing associations to overcome the issue of not being able to have a concierge or building manager available 24/7 at some developments. Now with internet communication, it’s possible for tenants and visitors to get in touch with someone should they need assistance, whether that’s from within the apartment or from an entrance point. For example, lets take the Videx VX2200 with IP concierge integration. This system is exceptionally flexible, enabling calls to be answered on Videx intercoms and also mobile phones if required. With the integration of the IP concierge each block can be either standalone or networked via the internet back to a central control room. Reduced maintenance costs and carbon footprint We work with a wide range of local authorities and housing associations to help them overcome access control and door entry challenges. One organisation we have recently partnered with is The Living Group to help them greatly reduce their maintenance costs and carbon footprint by installing the MiAccess offline proximity system on many of their developments across the North East. Technology developments have enabled better entry systems that are far more secure yet also more convenient and easier to manage By installing an appropriate system, The Living Group has managed to overcome issues caused by the existing system’s limitations and also enabled much more flexibility when it comes to effectively managing the access control system of all their included developments. For those responsible for effective and appropriate access control, the management of the systems are easier, quicker and there’s no delay or on-going costs for needing a specialist programme to modify fobs and access rights as this can now all carried out in-house. Improved security legislation Further advancements in programmes such as Secured by Design (SBD), a police initiative that improves the security of buildings and their immediate surroundings to provide safe places to live, work and visit, means that there’s more security legislation being implemented that’s making intercoms and access control more secure, without affecting ease and convenience. Videx holds an SBD accreditation and we know, from first-hand experience, how it’s making a difference in keeping tenants safe. When you combine the safety features promoted by an SBD member company like ourselves with the likes of the Videx event logging, image capture and ability to modify access users on the go, for example, we can help to create a very safe and secure environment. Personally, I think there needs to be a greater emphasis on the role of security legislation Technology has completely transformed the way local authorities and housing association are able to choose, install and manage door entry and access control systems for tenants and visitors alike. Personally, I think there needs to be a greater emphasis on the role of security legislation such as Secured by Design to ensure all councils and housing association consultants are up to date with what constitutes a robust and secure system that’s also cost effective too. In my role, I see weaknesses in systems and constant ongoing costs that could easily be avoided. For instance, features such as timed remote entry means local authority and housing association management no longer need to worry about keys being lost, the wrong keys being supplied or locks needing to be changed. With new systems such as the Videx MiAccess and Videx WS4 range, we can help to massively reduce a housing association’s or council’s carbon footprint and engineer costs by allowing them the access to management and control from an offsite location. Crime prevention We can also use live and logged events to help prevent crime in different ways, from antisocial behaviour growing around a tenant being called or visited much more regularly than others, to knowing a tenant is currently still living at a property but isn’t paying rent or answering to any correspondence. Technology enables local authorities and housing associations to receive detailed data and therefore behavioural insights on the people under their management and care. If consultants and specifiers are advised on the most appropriate systems that meet their specific entry needs, they can ensure greater, safer and more convenient access control that meets the requirements of both the end user and the those responsible for its effective management.
The MiQro Innovation Collaborative Centre (C2MI), the largest electronics systems research and development centre in Canada, has announced that they recently selected Honeywell for its new thermal screening and risk self-assessment process, at its Bromont, Quebec location, to better sustain operations and to help improve the well-being of building occupants and visitors. Thermal cameras installed C2MI is an internationally known micro-electronics research centre that requires 24/7 laboratory access for its team and collaborators. The COVID-19 pandemic challenged its standard operations and ability to provide laboratory access, while limiting potential virus exposure. Honeywell worked with C2MI to install a thermal camera solution to screen elevated skin temperatures and risk self-assessment, in order to streamline building access control, without the need for human interaction. Healthy Building Kiosk thermal sensors Using AI, the Healthy Building Kiosk thermal sensor monitors for trends and leverages variables Using artificial intelligence (AI), the Healthy Building Kiosk thermal sensor monitors for trends and leverages variables, such as the outdoor temperature to provide more accurate readings. If an elevated skin temperature is detected, the staffer or visitor is referred for testing, before being authorised access to the centre. The solution allows C2MI security staff to focus on other critical tasks and gives building users shared accountability. C2MI and Honeywell collaboration C2MI and Honeywell are continuously working to refine the technology, in order to create a more efficient and safer access control. C2MI will see a return on investment in less than one year, when calculating the cost of a security personnel dedicated to managing staff access control. “We’ve worked with C2MI to create a custom solution to improve the efficiency of building access and support a return to more normal operations,” said Laura Laltrello, Vice President and General Manager of North America services for Honeywell Building Technologies. 24/7 operations simplified Laura Laltrello adds, “With the implementation of the new Healthy Building Kiosk at the entrance, C2MI’s 24/7 operations are simplified, while allowing the security staff to focus on other critical tasks. We’ve also deployed a continuous improvement process with C2MI to refine the solution to best suit its needs and manage issues such as queuing.” “As a centre of collaboration and innovation, C2MI faced two challenges in the past year: the ability to sustain operations, while also taking steps to help make our staff and researchers safer,” said Marie-Josée Turgeon, General Manager for C2MI. Streamlining building access control Our collaboration with Honeywell has allowed us to streamline building entry" Marie-Josée Turgeon adds, “Our collaboration with Honeywell has allowed us to streamline building entry and remove the semi-manual process of individuals’ skin temperature reading, to help provide a safer environment for our teams.” C2MI also implemented health protocols aligned with local guidelines and recommendations, such as a work-from-home (WFH) policy, limiting the number of people in the cafeteria and conference rooms, encouraging social distancing, optimising disinfecting and cleaning, as well as mandatory procedural mask wearing. Honeywell Healthy Buildings solutions Honeywell’s Healthy Building solutions are part of a comprehensive effort to quickly develop innovative solutions that will help critical sectors of the global economy to recover, without the need to replace existing infrastructure at high costs. Honeywell’s Healthy Building solutions also provide a holistic view of a building’s health, based on the key factors, such as indoor air quality (IAQ), occupant flow, personal protective equipment (PPE) analytics, thermal screening, skin temperature monitoring, social distancing and sanitation efficacy.
Honeywell announced the expansion of capabilities of its MAXPRO Cloud portfolio with the launch of MPA1 and MPA2 access control panels that offer cloud, web-based or on-premise hosting options. “Our technologies can be integrated into existing systems, helping our customers create and maintain flexible, bespoke solutions that are best suited to their needs, which is especially important for SMBs,” said Rick Koscinski, North America General Manager, Honeywell Commercial Security. Rick adds, “Our new MPA1 and MPA2 control panels strengthens our MAXPRO Cloud offering by giving users cost-effective access control functionality and real-time security information from anywhere.” MAXPRO Cloud security solution MAXPRO Cloud is a cloud-based security solution designed for multi-site small and medium-sized businesses, which provides effective and efficient security and safety, while minimising IT costs and future-proofing investments. The MAXPRO Cloud solution integrates access control and video into an integrated and easy to use platform The MAXPRO Cloud solution integrates access control and video into an integrated and easy-to-use platform, and is used to protect multi-site infrastructure, such as retail, franchises, multi-tenant commercial and residential properties, schools and churches. With features such as global credential management, automated reporting and remote management of doors and schedules, the cloud-based security system is not only a great security solution, but also a powerful business tool. MPA1 single door POE-powered controller MPA1, a single door POE-powered controller is easy to install, operate and maintain, thanks to its unique edge installation design and its dedicated Device Utility App for fast and easy commissioning. It can either be mounted in a U.S. single gang junction box or in a specially designed compact enclosure with Status LED diagnostics. In addition, the embedded web interface allows the MPA1 to operate in stand-alone mode in single and multi-panel solutions. Honeywell MPA1 control panels feature: Flexible capability: With its small design and sleek enclosure, it can be leveraged for diverse deployment across a variety of jobs. In standalone mode, MPA1 can control a single door or manage multiple networked controllers. Faster installation: Single door Power over Ethernet (PoE) powered edge controller is fast and easy to commission via the Device Utility App on an Android or iOS mobile phone. At-the-door mounting decreases cable runs and with the small edge design, the MPA1 fits in U.S. single gang junction box. Only Open Supervised Device Protocol (OSDP) support: The latest communication technology for card readers provides strong encryption, bi-directional communication and improved cyber security resilience. It gives users the option of forming a platform that can be expanded in the future. It also features SSL certificate security, safeguarding connections to the panel. MPA1 has been developed with a small installer-friendly design that easily adapts to existing IT infrastructure and methods, reducing installation and support costs and supports OSDP reader connections, ensuring end-to-end secure communication from smart card to the host. So, as a system grows, MPA1 grows as well. MPA2 cloud-based access control panel MPA2 is a cloud and standalone access control panel for two door access control. The MPA2 panel features enhanced security due to a 128-bit AES encrypted bi-directional Open Supervised Device Protocol (OSDP) communication with access control readers. This combination of features, bolstered by an intuitive, browser-based user interface, gives customers an easy-to-use and secure site-access system. Users can manage MPA2 securely using Ethernet or Internet connections. Honeywell MPA2 control panels feature: Flexible 3-in-1 capability: Embedded, cloud- or software-hosted capability from one panel. This means that MPA2 can be deployed for a large variety of jobs, from basic access control for a single site to multi-site, enterprise-level security with fully integrated access, video and Faster installation: User-friendly, screwdriver-less installation is facilitated by push-in connectors and RJ45 cabling, halving the time previously required in fitting similar panels and offering benefits to installers, in terms of reduced operation and maintenance costs. IP-based hardware with Power over Ethernet (PoE) PLUS capability eliminates additional network module wiring and simplifies powering the panel. At-the-door mounting also decreases cable runs. MPA2 is built to use the Structure Cabling System in new buildings, where network/RJ45 cabling is already in place, reducing installation cost by up to 50%. Wiegand and OSDP Support: Next to legacy Wiegand communication, which makes it easy to connect to the most common Wiegand connected readers, MPA2 provides the latest communication technology for card readers for strong encryption, bi-directional communication and improved cyber security resilience. It gives users the option of forming a platform that can be expanded in the future. It also features SSL certificate security, safeguarding connections to the panel. MPA2 offers a simplified approach to security management, improving business and employee productivity, by reducing both training and operating time. The new panel is available as a standalone product and can be fitted into existing security set-ups with ease.
Honeywell, a global provider of connected buildings, and IDEMIA, a global provider of Augmented Identity, announced a strategic alliance to create and cultivate an intelligent building ecosystem that provides a more seamless and enhanced experience for operators and occupants alike. The alliance will integrate Honeywell’s security and building management systems with IDEMIA’s biometric-based access control systems to create frictionless, safer and more efficient buildings. The Honeywell and IDEMIA alliance is intended to design solutions that will allow occupants to easily and securely have contactless engagement with a building - from vehicle recognition at the car park and automatic elevator calls to biometric-based access and personalised conference room settings. With a focus on security and data privacy, these next-generation solutions will provide occupants with a safer, more efficient and more enjoyable experience that will help building owners attract tenants. Complex security requirements “We recognise that our customers need to deliver business outcomes like managing complex security requirements and providing healthier, more productive environments,” said Manish Sharma, Vice President, Chief Technology and Chief Product Officer for Honeywell Building Technologies. We will create an intelligent building ecosystem that better addresses our customers’ key challenges" “By working with IDEMIA, we will create an intelligent building ecosystem that better addresses our customers’ key challenges and drives their desired outcomes. Whether it’s a commercial office building, a hospital or an airport, we have the ability to change the way people experience and interact with buildings for the better.” Safety and security systems “We look forward to expanding our long-standing relationship with Honeywell to bring greater value to our customers with more integrated solutions that make for a more seamless building experience,” said Matt Cole, CEO, Secure Enterprise Transactions Division, IDEMIA. “The ability for our technology to easily integrate with Honeywell safety and security systems will provide building owners and operators more insight and control into creating more efficient buildings, while putting the occupant experience first.” Facial recognition terminal IDEMIA’s field-proven AI-based products and solutions - like MorphoWaveTM, a contactless fingerprint device that scans four fingerprints in less than one second; VisionPass, the most advanced facial recognition terminal; or Augmented Vision, a biometric video analytics platform - integrate with Honeywell security and building management systems. Honeywell’s systems include Pro-Watch Integrated Security Suite, MAXPRO Cloud and Enterprise Buildings Integrator. Honeywell and IDEMIA will work together to deliver powerful integrations through aligned product creation Honeywell and IDEMIA will work together to deliver more powerful integrations through aligned product creation and joint product roadmaps. The integrated offerings will allow building operators to respond rapidly and effectively to alarms or incidents by providing an incident workflow package that allows Standard Operating Procedures (SOPs) to be configured, reducing compliance exceptions, security risks and response times. Personal protection equipment IDEMIA products also support Honeywell’s Healthy Buildings solutions that help building owners improve building environments, operate more cleanly and safely and encourage sustained compliance with changing building standards, safety guidelines, government-issued regulations and a company's risk management policies. Honeywell's Healthy Buildings solutions provide a holistic view of a building's health based on key factors such as indoor air quality, occupant flow, personal protection equipment (PPE) analytics, contactless access, thermal screening, social distancing and sanitation efficacy.
Related white papers
Facing the ever-evolving hacker head-on
Four areas to consider in frictionless access control
Physical access control in higher education
Six things to look for when adding AI cameras to your operationDownload
Best practices guide: analogue video to cloudDownload
Delivering a smart, secure and healthy workplace with cloudDownload
Capture new opportunities with computer vision and video analyticsDownload
Q&A: Bosch Video Systems & Solutions' Michael Seiter and Magnus Ekerot on smart technology, "AIot", and plans for 2021
- ISONAS Pure IP access control solution creates a safer environment in Our Lady of Perpetual Help Parish, Ohio
- Access IS delivers contactless transit payment solutions for Storstockholms Lokaltrafik to secure Stockholm’s public transport
- Matrix Access Control solution helps secure Sovereign Safe’s safety deposit vaults
- Climax Technology launches GX-DT35B Smart Care Medical Alarm to keep seniors safe