Access Control Readers(401)
A new multi-communication protocol reader is being introduced by Vanderbilt for the range of SiPass access control systems. The new PP500-EM is a heavy-duty proximity and PIN reader which can be used in any of the popular SiPass systems: SiPass Entro Lite, SiPass Entro and SiPass Integrated. The reader supports 2 different card technologies - 125 KHz (released in February 2008) and Cotag (released in May 2008) - plus additional protocols which allow connection to other access control systems, as well as intrusion systems.The PP500's robust, vandal resistant housing makes it ideal for use in outdoor, as well as indoor applications, including tough environments. Vandal and weather resistance can be further enhanced through the use of accessories such as a flush mounting kit and rain cover. The reader offers online status monitoring and use of both active and passive card reading. Configuration commands are available via the keypad, with advanced configuration achieved through configuration cards to specifically tailor user feedback to the customer's needs.Add to Compare
This wireless locking device is easy to install and maintain, and gives small businesses, education, medical and retail premises a simple way to filter access through any door, without the expense or complication of a complete electronic access control system. KeyPad Escutcheon design and installation A slim, modern design and capacitive keypad makes the SMARTair™ Standalone KeyPad Escutcheon well suited to securing collective areas such as common bathrooms, storerooms and maintenance cupboards; staff, changing or copy rooms in schools, colleges and universities; and clinics and other private areas in hospitals or dental surgeries. The Standalone KeyPad Escutcheon is ideal for securing any door or site where a full access control system is unsuitable, unaffordable or unwanted. It’s easy even for non-technical staff or contractors to install the SMARTair™ Standalone KeyPad Escutcheon: there’s no wiring or drilling, and no software to configure. Simply replacing the current mechanical lock with a SMARTair™ Standalone KeyPad Escutcheon adds electronic PIN security to a door equipped with a standard lock. Convenient authentication Keys can be lost, copied or stolen; the SMARTair™ Standalone KeyPad Escutcheon provides a convenient, modern solution. User PINs can be added quickly at the door without the need for software installation, just by using the programming card. It supports up to 100 different 4- to 6-number PINs, and has an audible buzzer to confirm permission. The device also supports standard RFID cards up to 500 cards per device which offers the possibility to choose between the most convenient authentication option. Like every SMARTair™ product, the new Standalone KeyPad Escutcheon is available for Euro, Scandinavian and DIN profiles, and fits wooden, glass and narrow doors. Power is supplied to the keypad by a standard lithium-ion battery — meaning maintenance costs and workload are minimal. Integrated, software-powered system For premises looking to trial the benefits of access control, the Standalone KeyPad Escutcheon can also be a first stepping stone to a more integrated, software-powered system. The new device can be upgraded to work as part of a modular, fully scalable SMARTair™ system which provides real-time access control and audit trails. With an upgraded system, users can open doors with contactless smart cards using a range of standard RFID technologies, or remotely using a secure smartphone app, and administrators can issue or revoke keycards in an instant using a secure online tool. SMARTair™ access control is the affordable, intelligent upgrade to old-fashioned mechanical keys. And with the new Standalone KeyPad Escutcheon, it’s easier than ever to boost security at any small or medium-sized business, medical, education or retail premises with SMARTair™. Because, if what’s most valuable is on the inside, you don’t want just anyone opening the door. For more information visit www.tesa.es/discoverwirelessAdd to Compare
The modern workplace never rests. People are always on the move and the environment is subject to constant change. As a result, the need for effective, flexible control and security is increasingly important. Every site has its own challenges and requirements; from the protection of files and documents to restricting access to sensitive areas in a medical centre or having real-time information about employee movements around a complex company. Intelligent online access control For every one of these needs and more, SMARTair™ Pro Wireless Online offers the ideal access control solution. This secure wireless system is quick and easy to install and provides cost-effectiveness by keeping energy use and maintenance costs to a minimum. The new SMARTair™ solution is an intelligent online access control system that uses bi-directional encrypted radio frequency communication to upgrade security and convenience for all building users. SMARTair™ wireless, battery-powered door devices communicate with the central control system via TCP/IP hubs. With SMARTair™, system administrators can now open secure doors from anywhere, configure a user’s access rights remotely, or obtain real-time audit trails for any access point within the organisation. Lost or stolen cards can be instantly cancelled. Simple and intuitive system software makes it easy for facility managers to receive active e-mail warnings and real-time reports, access real-time door updates, or modify the time and scheduling of access rights. Key components The system has a simple but effective architecture consisting of four key elements. Door and wall devices include wireless electronic escutcheons, cylinders and wall readers that can be installed at any type of exterior or interior door or access point. The SMARTair™ admin software is an intuitive management tool that offers flexibility and real-time control, accessible also from a secure portal that works inside almost any standard web browser. Communication hubs are the nexus between the management software server and the wireless online devices. Each can connect up to 30 access points at a distance of up to 30 metres. Finally, SMARTair™ supports all major RFID technologies, including iCLASS® by HID, MIFARE CLASSIC, DESFire and SKIDATA. It’s also compatible with multiple credentials for user convenience, including the SMARTair™ mobile phone app (Android, iOS, WinPho), cards, tags, bracelets and stickers. For more information visit www.tesa.es/discoverwirelessAdd to Compare
HID Global is offering new access-control readers and credentials that provide the industry's most extensive options for migrating from legacy solutions to higher-security 13.56 MHz contactless technologies. HID readers can be used with an extensive array of single- and combination-technology cards including its industry-first dual-high frequency (HF) credential. They extend the Genuine HID™ value proposition by giving customers the industry's largest selection of reader and credential migration solutions.HID's expanded migration offering includes: An iCLASS® reader for migration from MIFARE® Classic to secure 13.56 MHz MIFARE DESFire® EV1 and HID iCLASS contactless technology; New multiCLASS® readers for migration from legacy magnetic stripe (magstripe) and 125 kHz proximity card technology to higher-security MHz HID iCLASS contactless technology; and The industry's first dual-HF credential, which bridges the gap between legacy solutions and secure iCLASS and MIFARE DESFire EV1 contactless technologies, expanding customer options for deploying the highest levels of security, while maximizing the value of their credential investment by enabling multiple applications on a single card. Product details iCLASS high-frequency migration reader: HID's proven and widely deployed iCLASS reader line has now been extended to enable migration from MIFARE Classic technology to secure 13.56 MHz technologies for improved security, performance and data integrity, or to support multiple applications with a single credential that can also be used as a photo-ready identity badge. iCLASS readers are also available in configurations that provide compatibility with a wide scope of card technologies including: Dutch Government Rijkspas; 125 kHz proximity technologies such as HID Prox and IndalaProx; legacy technologies such as Wiegand and magnetic stripe; and other technologies including EM4102 Prox, AWID Prox, US Government FIPS 201, Sony FeliCa Transit, Singapore CEPAS Transit, Magstripe and ISO 14443/15693 card serial numbers. multiCLASS migration readers: The RM40 and RMP40 are new, non-keypad versions of the company's RMK40 and RMPK40 readers for Magstripe-to-iCLASS and Magstripe- and Prox-to-iCLASS migration, respectively, which were introduced earlier this year. They provide customers with the most cost-effective solution for seamlessly upgrading from legacy reader technology to contactless smart card capabilities. The readers support ANSI/ISO 7811 magstripe data conversion or pass-through configuration in combination with HID Prox and popular 13.56 MHz contactless access control technologies including iCLASS credentials. Dual-HF credentials: HID's iCLASS/MIFARE Classic, iCLASS/MIFARE DESFire EV1, and MIFARE Classic/MIFARE DESFire EV1 credentials make it easy to move from legacy solutions to secure contactless technologies over time, across multiple facilities, or within subsets of a larger cardholder base. The dual-HF credentials use advanced radio frequency (RF) engineering to combine iCLASS with MIFARE or MIFARE DESFire EV1 technologies, or to combine MIFARE Classic with MIFARE DESFire EV1 technology. The technologies are embeddable with a contact chip, and can also optionally be combined with HID Prox technology. They enable users to combine access control on a single credential with other applications including secure network, print authentication, time and attendance, digital cash and vending, transit passes, and equipment and material check-out.Add to Compare
At IFSEC 2011, Nedap Security Management presented AEOS 3.0 with a completely revised graphical user interface for the intuitive and user-friendly operation of AEOS. The management platform AEOS can combine several security disciplines on one single controller and within one server environment. Everything can be handled from one single user interface, making it easier for system users to handle alarms quickly and effectively.In addition, Nedap Security Management also presented AEOS IP Video Management, a truly native video integration, which goes technologically well beyond existing DVR and even open platform based solutions. Live and stored video images can be viewed by means of AEOS faces, part of the AEOS front end suite, while offering complete freedom of camera choice and storage media based upon industry standards. Moreover, images can be stored on an AEpu (controller) attached hard drive, which significantly reduces bandwidth and network load issues.The Invexs 190 is the latest addition to the very successful series of Invexs card readers and will officially be introduced to the British market at the IFSEC 2011. This stylish designed door frame (mullion) card reader can be used in outside environments and fits perfectly with today's office buildings. The optional use of the on-board SAM socket makes it future proof and ensures possible use in high-security environments.Nedap Security Management will share its booth with the Nedap business unit Automatic Vehicle Identification (AVI). Nedap AVI will show the Booster 2G, the latest addition to the TRANSIT perimeter security productline, and the UPass Reach reader with the latest UHF technology.Add to Compare
Browse Access Control Readers
- Long Range
- Keypad Integrated
Access control reader products updated recently
Edge devices (and edge computing) are the future. Although, this does seem a little cliché, it is the truth. The edge computing industry is growing as quickly as technology can support it and it looks like we will need it to. IoT global market The IoT (Internet of Things) industry alone will have put 15 billion new IoT devices into operation by the year 2020 according to a recent Forbes article titled, “10 Charts That Will Challenge Your Perspective of IoT’s growth”. IoT devices are not the only edge devices we have to deal with as the total number of connected edge devices includes the likes of devices like security devices, phones, sensors, retail sales devices, and industrial and home automation devices. The IoT (Internet of Things) industry alone will have put 15 billion new IoT devices into operation by the year 2020 The sheer number of devices begins to bring thoughts of possible security and bandwidth implications into perspective. The amount of data that will need to be passed and processed with all of these devices will be massive. There needs to be consideration taken by all business owners and automation engineers into how this amount of data and processing will be conducted. Ever-expanding edge devices market As the number of edge devices in the marketplace and their use among consumers and businesses rises, the need to be able to handle the data from all of these devices is no longer going to be suitable for central server architectures. We are talking about hundreds of billions and even trillions of devices. According to IHS Markit researchers’ study, there were 245 million CCTV cameras worldwide. One has to imagine there are at least 25% of that many access control devices (61.25 million devices) based on a $344 million market cap also calculated by IHS Markit’s researchers. If all the other edge devices mentioned earlier are considered then one can see that trying to route them all through servers for processing is going to start to become difficult if it hasn’t already, -which arguably it already has, as is evidenced by the popularity of cloud-based solutions amongst those businesses that already use a lot of edge devices or are processing a lot of information on a constant basis. Cloud computing The question is whether cloud computing the most effective and efficient solution as the IoT industry grows The question is this; is cloud computing the most effective and efficient solution as the IoT industry grows and the amount of edge devices becomes so numerous? My belief is that it is not. Taking the example of a $399 USD device that is just larger than the size of a pack of cards and runs a CPU benchmarked at the same level as a mid-size desktop. This device has 8GB RAM and 64GB EMMC built-in and a GPU that can comfortably support a 4K signal at 60Hz with support for NVMe SSDs for add-on storage. This would have been unbelievable five years ago. As the price of edge computing goes down, which it has done in a dramatic way over the last 10 years (as can be seen with my recent purchase), the price to maintain a central server that can perform the processing required for all of the new devices being introduced to the world (due to the low cost of entry for edge device manufacturers) becomes more expensive. This introduces the guarantee that there will be a point where it will be less expensive for businesses, and consumers alike, to do the bulk of their processing at the edge as opposed to in central server architectures. Cloud computing is now being overtaken by edge computing, the method of processing data at the edge of the network in the devices themselves Edge computing There are a plethora of articles discussing and detailing the opposition between the two sides of the computing technology coin, cloud computing and edge computing. The gist of it is that “cloud computing” was the hot new buzzword three years ago and is now being overtaken by “edge computing.” The truth is that cloud computing is a central server architecture hosted at someone else’s location. Edge computing is going to be a necessary development in the technology industry Edge computing is the method of processing data at the edge of the network (in the devices themselves) and allowing for less resources required at a central location. There is certainly a use case for both, however the shift to edge computing amongst the general public and small to mid-sized businesses will not be a surprise to those players, who have been paying attention. One article titled, “Next Big Thing In Cloud Computing Puts Amazon And Its Peers On The Edge” by Investor’s Business Daily takes the stance that edge computing is going to completely displace centralised cloud computing and even coins the phrase, “Cloud computing, decentralised” to explain edge computing. It speaks for the stance that most experts in technology seem to be taking, including Amazon Web Services’ VP of Technology, Marco Argenti according to the same article. We know that edge computing is going to be a necessary development in the technology industry, and it is happening as I write this, and quickly at that. Cost efficiency of edge processing As time goes on, the intersection between the prices of network bandwidth, edge processing and maintaining super powerful central servers will cause edge processing to be the most efficient and cost-effective way to maintain a scalable network in any environment, including datacenters. Owning a central server or utilising edge computing become the better options As it currently stands, most residential users can only achieve a 1Gbps WAN (internet) connection, and small to medium-sized business can’t get much more but seem to get much less, based on my personal experience. When more than 1Gbps needs to be processed, cloud computing becomes very expensive at which point, owning a central server or utilising edge computing become the better options. Then you look a total cost of ownership and when the cost of edge computing is less expensive than the cost of maintaining central server architectures, edge computing becomes the single best option. So, I’ll say it again, edge devices (and edge computing) are the future.
ISC West continues to innovate and adapt to the changing needs of the security marketplace. In 2019, there will be 200 new exhibitors, 100 new speakers and an expanding mix of attendees that includes more end users and international attendees. The International Security Conference & Exposition (ISC West) will be held April 10-12 at the Sands Expo in Las Vegas. Among the more than 200 new exhibitors on the show floor will be Dell Technologies, Resideo, SAST (a Bosch IoT startup), Belkin International, NetApp, Lenovo, Kingston Technology and many others. The event continues to see more and more solutions in the area of IoT/connected security, a surge in barrier/bollards exhibitors, an increased number of start-up companies, and an emphasis this year on stadium/major events security. Plus, the new exhibit area of ISC West, Venetian Ballroom, will include a mix of solutions from mid-sized domestic and international companies, and is the home of the Emerging Technology Zone – back for its second year with 50-plus start-up companies expected. The International Security Conference & Exposition (ISC West) will be held April 10-12 at the Sands Expo in Las Vegas “ISC West is no longer just about video cameras, access control systems and alarms,” says Will Wise, Group Vice President, Security Portfolio for Reed Exhibitions, which produces and manages ISC West. Embracing and stimulating the market dynamic of comprehensive security for a safer, connected world, solutions on display at the show reflect convergence across physical security, IT (information technology) and OT (operational technology). The ISC West expo floor includes specialised featured areas such Connected Home, Public Safety & Security, Connected Security, Unmanned Security Expo and the Emerging Technology Zone. Plus, complimentary education sessions in the Unmanned Security Expo theatre will include topics such as drones, counter-drone solutions, ground robotics and regulations/policies that support autonomous technology. This year’s event will feature more than 1,000 products and brands covering everything from video surveillance, access control and alarms/alerts, to IoT, IT/cybersecurity convergence, AI, embedded systems, drones and robotics, smart homes, smart cities, public safety and more. The ISC West expo floor includes specialised featured areas such Connected Home and the Emerging Technology Zone Elevating the Keynote Series Over the past few years, ISC West has elevated its Keynote Series (open to all attendee types) to include more speakers and dynamic content covering relevant topics. Attendees should be sure to head to the Keynote room Wednesday and Thursday mornings at 8:30 a.m. before the expo floor opens at 10 a.m. Relating to attendance, ISC West continues to diversify and grow the attendee universe by attracting additional enterprise government end-users across physical and IT/OT responsibilities. The show also continues to attract and grow the channel audience, and there will be an increasing number of International attendees. “Years ago, ISC West was known exclusively as a dealer/integrator/installer show, but not anymore,” says Wise. “Today, the demographic mix continues to evolve as the event diversifies its product and educational offerings, embracing the current market reality of collaboration among integrators/dealers/installers, end-user decision-makers, and public safety and security professionals.” When planning for the show, be sure to view the list of special events and take advantage of the additional connection-making opportunities Within the SIA Education@ISC West conference program, there are over 100 new speakers. Through ISC West’s strong partnership with the Security Industry Association (SIA, the Premier Sponsor of ISC), the SIA Education@ISC West program has expanded and become increasingly dynamic and diverse over the last three years. In addition, ISC West and SIA are hosting a Women in Security breakfast on Friday morning April 12th. Women in Security is a new track for the education program. “Our attendance data reflects the demand for a mix of physical security integrator and end-user content, a balance of technical and management/strategic topics, and diverse topics incorporating IoT and cybersecurity/physical security convergence, and analytics expertise,” says Wise. “Last year was a record year for conference program attendance, and 2019 will yet again set new benchmarks.” Mobile apps, information desks and ease of registration ISC West is also focusing on the attendee experience. Need advice on what exhibitors are a fit for your business needs and interests? The Information Desk adjacent to the main expo entrance will provide customised recommendations based on the information attendees provided during the registration process. Attendees can download the official ISC West mobile app and create a MyShow account through the ISC West website Attendees can download the official ISC West mobile app and create a MyShow account through the ISC West website to research exhibitors and product categories, receive exhibitor recommendations that best fit business needs, review complimentary educational opportunities as well as 85-plus sessions from the paid SIA Education@ISC program. There are many networking opportunities being offered at the show this year. When planning for the show, be sure to view the list of special events and take advantage of the additional connection-making opportunities. Whether attendees want to network with peers or customers at an awards ceremony (Sammy Awards, Fast 50, New Product Showcase Awards), Charity event (AIREF Golf Classic, Mission 500 Security 5K-2K Run/Walk), or an industry party (SIA Market Leaders Reception, ISC West Customer Appreciation Party at Tao), there are a variety of special events offered, all designed to help you make new connections. Make sure to check out the ISC West website for all the Special Events taking place at ISC West.
Today’s security industry technology standards create a common framework for achieving predictable performance. Systems are made more secure and easier to install, use and integrate with other devices. Standards are also intended to be living documents, open to continual refinements to benefit manufacturers, integrators and end users. An excellent example is the Open Supervised Data Protocol (OSDP), which is now the industry’s gold standard for physical access control installations. It was designed to offer a higher level of security with more flexible options than the aging defacto Weigand wiring standard. Updating OSDP-readers simultaneously One recent addition enables end users to push firmware and software updates to thousands of OSDP-enabled card readers simultaneouslyOSDP, first introduced in 2011 by the Security Industry Association (SIA), continues to evolve with significant manufacturer input. One recent addition enables end users to push firmware and/or software updates to a few or thousands of OSDP-enabled card readers simultaneously. Weigand technology requires updates to be made one at a time at each reader. Regularly changing reader encryption keys is an excellent way to enhance facility security. It’s easy using the OSDP file transfer capability and the latest DESFire EV2 credentials containing multiple encryption keys. You can transfer the next code on the card to all readers and the job is done. And there’s no need to create a new card for each user or reprogram each individual reader. AES-128 encryption ensures cybersecurity It’s time to migrate entirely away from Weigand technology. If greater security, convenience and reduced labour from the latest OSDP updates isn’t reason enough, here are a few more things to consider. The 40-year-old Weigand protocol provides no signal encryption, making it easy for hackers to capture the raw data transmitted between cards and readers. OSDP readers support AES-128 encryption while providing continuous monitoring of wires to guard against cybercriminals. Weigand reader installations require homerun cable pulls from the control panel to each peripheral device. OSDP readers can be daisy chained, providing additional savings on cabling and installation time. Weigand technology is simply too slow to work with today’s most versatile and secure card technologies. OSDP readers work with virtually all modern access control cards. The OSDP standard also works with biometric devices; Weigand does not. Meeting requirements of FICAM guidelines SIA is pushing to make the latest OSDP version a standard recognised by the ANSI, a move to enhance the global competitiveness of U.S. security businessesAlso, OSDP is becoming a must-have standard for organisations demanding the highest security levels. The standard meets requirements of the Federal Identity, Credential and Access Management (FICAM) guidelines that affect how the access control industry does business with the federal government. SIA is pushing to make the latest OSDP version a standard recognised by the American National Standard Institute (ANSI), a move to enhance the global competitiveness of U.S. security businesses. There’s still a large worldwide reader installation base that works solely with the Weigand protocol. Admittedly, changing them all at one time may be prohibitively expensive; however, standards should be viewed as a journey, not a destination. That’s why a measured migration is the right choice for many organisations. Begin by securing the perimeter. Replace only the outside-facing Weigand readers. As long as the walls are secured, the inside can remain a softer target until OSDP-compatible readers can be added indoors. The case for moving to OSDP as a standard is compelling. It offers our industry the opportunity to design access control software and products that provide what end users want most – greater security, flexibility and convenience.
Combining systems intelligence and human insight for superior securityDownload
Three reasons for adopting open architecture access control solutionsDownload
5 steps to finding the right access control system for youDownload
Nortech exhibits Nedap UPASS Reach reader for efficient, cost-saving vehicle access control for parking applications
- Nortech exhibits Nedap UPASS Reach reader for efficient, cost-saving vehicle access control for parking applications
- HID Global unveils support for Seos-enabled student IDs in Apple Wallet
- Gallagher secures Port of Tauranga with its access control solution
- Gallagher secures Wintec’s campus with its access control systems and intruder alarm systems