US Edition
Security camera lens, CCTV Camera, Digital Recorder, Telemetric Transmitter and Controller, Intruder Alarm Control Panel, Access Control Reader, Dome Camera
Home  |  Settings  |  Marketing Options  |  eNewsletters  |  About Us  |  FAQs    Join on LinkedIn
Detailed technical specifications of ComNet FVT/FVR80D4SFP, one of over 113 Analogue Transmission from ComNet
  • Technical spec

ComNet FVT/FVR80D4SFP optical video link

The ComNet FVT/FVR80D4SFP analogue transmission features voltage transient protection on all its power and signal input/output lines, thus providing protection from power surges and other voltage transient events. The installation of this optical video link is easy due to its plug-and-play design. Also, the LED indicators enable the user to confirm the operating status of the ComNet FVT/FVR80D4SFP analogue transmission. This optical video link not only exceeds requirements for RS-250C short haul transmission, but also it is compatible with NTSC, PAL, or SECAM CCTV camera systems.
Contact companySaveSaveSend to a friendSend to a friend
Manufacturer: ComNet Europe Ltd. ComNet Europe Ltd.Download DatasheetDownload Datasheet
ComNet FVT/FVR80D4SFP CCTV transmission system
Model CodeFVT/FVR80D4SFP
Transmission typeFibre Optic
Video Inputs8
Signal ModePAL / NTSC
Bandwidth MHz5 Hz ~ 6.5 MHz
Network PropertiesBit rate Bps: 10
Physical SpecificationsWeight g: 900
Dimensions mm: 155 x 135 x 83
Electrical SpecificationsPower Consumption: 3 W
Voltage: 8 ~ 15 V DC
Environmental SpecificationsOperating Temp oC: -40 ~ +75 C (-40 ~ +167 F)
Operating Humidity %: 0 ~ 95
Model InfoComNet FVT/FVR80D4SFP optical video link provides transmission of eight 10-bit short-haul quality digital video channels and four bi-directional data channels through a selectable small form factor pluggable module (SFP). The data channels support RS232, RS422 and 2 wire and 4 wire RS485. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-colour (Red/Green) LED indicators are provided for confirming operating status. The unit is interchangeable between stand-alone or card mount configurations.

Download Technical spec

Compare ComNet FVT/FVR80D4SFP with Analogue Transmission from other manufacturers

Product News

Bookmark and Share

See privacy and cookie policy
Browsing from the Americas? Looking for US Edition?
View this content on US Edition, our dedicated portal for our Americas audience.
Do not show me this again
International EditionUS Edition