Browse CCTV Switchers & Switches

CCTV Switchers & Switches - Expert commentary

Will network requirements help you build your business or put you out of business?
Will network requirements help you build your business or put you out of business?

Once upon a time, providers had end-to-end control when deploying a physical security platform, which is not the case anymore when we consider the modernisation to IP. When considering the move to IP physical security, the provider needs to ensure the customer has a robust PoE backbone to connect the IP security device back to the application. Network readiness requirements have complicated IP security deployments, making it challenging for current providers while opening the door to new competitors. Competition is increasing Network providers see the move to IP as an opportunity to expand their wallet share. As the trusted advisors to IT teams, network providers leverage their position to win over the physical security business. As the time, cost, and complexity increases to move a customer to IP; providers need to expand their offering, considering the decline in endpoint revenue margins (the "race to the bottom"). Unfortunately, PoE networks are becoming increasingly complex as IoT endpoints are continually introduced to the network. Before the IP/IoT deployment can occur, the network provider (now your competition as well) will have the opportunity to edge you out and offer an IP/IoT solution with the network. The traditional approach is outdated They have standardised this cookie-cutter solution that may work for some, but not for all While we accept that we are collectively relying on our networks to support an increasing number of devices and applications, many have not considered the local area network's evolution. Organisations no longer only connect data terminals and printers to the network - they connect all manner of intelligent devices, including Wi-Fi access points, cameras, phones, access control, lighting, intercoms, and more. Many traditionalists will recommend the rip-and-replace of existing infrastructure while layering all IoT devices on the same network. They have standardised this cookie-cutter solution that may work for some, but not for all. What if there was a better way? Create the best outcome for you and your customer Let's start by thinking about the customer's desired outcome. The customer wants new capabilities within an acceptable ROI. Given the complications surrounding COVID-19, these organisations may require solutions very quickly to operate safely and within governmental guidelines. However, these organisations first need to establish a LAN framework without high costs, disruption to business, or complexity. They do not want to compromise network security or their business. They do not want network requirements to account for the majority of their budget as there is no ROI in infrastructure. The infrastructure supports the ROI gained from the devices and applications it enables. How do we provide a network solution that addresses both the customer and the provider's needs? Customers need a network that: Eliminates competitive pressures, giving providers end-to-end control over the network and the entire digital transformation experience. Shorten sales and deployment cycles to simplify network readiness and reduce the budget allocation towards infrastructure. Focus on device and application implementation and adoption to improve the customer's ROI. Build a physically separate PoE backbone for IP/IoT applications to maximise network security and performance while simplifying ongoing management. Eliminate the dependency on other providers. Advice from Albert Einstein We cannot solve a problem using the same kind of thinking we used when we created it" To help achieve these outcomes, I encourage you to accept some advice from Albert Einstein. Einstein once said, "The only thing that interferes with my learning is my education." Sometimes we are unwilling to accept new ideas because of preconceived notions about how things "ought to be done." We must embrace innovation and challenge our best practices that are based on past education. Einstein also said, "We cannot solve a problem using the same kind of thinking we used when we created it." Sometimes we must challenge ourselves to think differently by using innovations to create better outcomes for our businesses and customers. Consider this for a second: are you focused on the problem rather than finding a unique alternative solution? Einstein defined insanity as "doing the same thing over and over and expecting different results." Your customers are all unique with different digital transformation challenges and objectives. The cookie-cutter, rip-and-replace method has not worked for all. If it did, every organization would have all the IP and IoT solutions they need. It's time to consider a fresh new approach that may challenge your education. Don't let our education get in the way of your learning! Looking to innovation and modern solutions The idea of The Modern LAN, introduced by Frost & Sullivan, aims to present a paradigm shift in LAN design for IP and the IoT. The whitepaper, available for free using the link above, offers an enhancement to traditional LAN design to address IP and IoT devices' specific needs. Today, we connect more than just data terminals, and we must design our networks accordingly. Instead of starting with the network, Modern LAN design suggests starting with the endpoint requirements and building a network to address these considerations. One of the foundations of Modern LAN design is to consider all networking innovations available. NVT Phybridge PoE innovations allow you to leverage different cable types, including coax, single-pair UTP, and multi-pair UTP cabling, to enable IoT devices at much greater distances than traditional switches. Aligned with Modern LAN design, you can transform the existing network into a robust and secure PoE backbone instead of removing and replacing the reliable infrastructure. PoE switch solutions PoE switch solutions leverage different core technology that vary in capability and effectiveness I know what you may be thinking: Am I compromising on network performance by leveraging these innovations? The answer is: it depends on the technology. PoE switch solutions leverage different core technology (Homeplug, VDSL, ADSL, Ethernet, etc.) that vary in capability and effectiveness. For more than 15 years, NVT Phybridge has been a global pioneer in long-reach PoE technology. We were the first company to develop a switch that delivered Ethernet and PoE over a single pair of UTP wire with up to 1,200ft (365m) reach, which is four times the reach of standard switches. We have spent the last 15 years surprising the industry with our capabilities and satisfying customers with our technology. Performance is paramount We understand that innovation is met with scrutiny and skepticism. We also know that some companies make claims that they cannot back up, which can sometimes shed a negative light on an entire industry or product category. However, our enterprise-grade networking solutions have helped thousands of customers modernise to the next generation of intelligent devices without high costs, complexity, or disruption to their business. For example, our CLEER24 switch is a 24-port Ethernet over Coax innovation that delivers Ethernet and PoE+ over a single coax cable with up to 6,000ft (1,830m) reach, which is 18-times the reach of a standard switch.  Transform network readiness requirements into an opportunity to grow your business! Be a thought leader, leverage Modern LAN design, and introduce NVT Phybridge PoE innovations to your customers. It's time to change the conversation around LAN design and improve the outcome for you and your customers.

Will network requirements help you build your business or put you out of business?
Will network requirements help you build your business or put you out of business?

Once upon a time, providers had end-to-end control when deploying a physical security platform, which is not the case anymore when we consider the modernisation to IP. When considering the move to IP physical security, the provider needs to ensure the customer has a robust PoE backbone to connect the IP security device back to the application. Network readiness requirements have complicated IP security deployments, making it challenging for current providers while opening the door to new competitors. Competition is increasing Network providers see the move to IP as an opportunity to expand their wallet share. As the trusted advisors to IT teams, network providers leverage their position to win over the physical security business. As the time, cost, and complexity increases to move a customer to IP; providers need to expand their offering, considering the decline in endpoint revenue margins (the "race to the bottom"). Unfortunately, PoE networks are becoming increasingly complex as IoT endpoints are continually introduced to the network. Before the IP/IoT deployment can occur, the network provider (now your competition as well) will have the opportunity to edge you out and offer an IP/IoT solution with the network. The traditional approach is outdated They have standardised this cookie-cutter solution that may work for some, but not for all While we accept that we are collectively relying on our networks to support an increasing number of devices and applications, many have not considered the local area network's evolution. Organisations no longer only connect data terminals and printers to the network - they connect all manner of intelligent devices, including Wi-Fi access points, cameras, phones, access control, lighting, intercoms, and more. Many traditionalists will recommend the rip-and-replace of existing infrastructure while layering all IoT devices on the same network. They have standardised this cookie-cutter solution that may work for some, but not for all. What if there was a better way? Create the best outcome for you and your customer Let's start by thinking about the customer's desired outcome. The customer wants new capabilities within an acceptable ROI. Given the complications surrounding COVID-19, these organisations may require solutions very quickly to operate safely and within governmental guidelines. However, these organisations first need to establish a LAN framework without high costs, disruption to business, or complexity. They do not want to compromise network security or their business. They do not want network requirements to account for the majority of their budget as there is no ROI in infrastructure. The infrastructure supports the ROI gained from the devices and applications it enables. How do we provide a network solution that addresses both the customer and the provider's needs? Customers need a network that: Eliminates competitive pressures, giving providers end-to-end control over the network and the entire digital transformation experience. Shorten sales and deployment cycles to simplify network readiness and reduce the budget allocation towards infrastructure. Focus on device and application implementation and adoption to improve the customer's ROI. Build a physically separate PoE backbone for IP/IoT applications to maximise network security and performance while simplifying ongoing management. Eliminate the dependency on other providers. Advice from Albert Einstein We cannot solve a problem using the same kind of thinking we used when we created it" To help achieve these outcomes, I encourage you to accept some advice from Albert Einstein. Einstein once said, "The only thing that interferes with my learning is my education." Sometimes we are unwilling to accept new ideas because of preconceived notions about how things "ought to be done." We must embrace innovation and challenge our best practices that are based on past education. Einstein also said, "We cannot solve a problem using the same kind of thinking we used when we created it." Sometimes we must challenge ourselves to think differently by using innovations to create better outcomes for our businesses and customers. Consider this for a second: are you focused on the problem rather than finding a unique alternative solution? Einstein defined insanity as "doing the same thing over and over and expecting different results." Your customers are all unique with different digital transformation challenges and objectives. The cookie-cutter, rip-and-replace method has not worked for all. If it did, every organization would have all the IP and IoT solutions they need. It's time to consider a fresh new approach that may challenge your education. Don't let our education get in the way of your learning! Looking to innovation and modern solutions The idea of The Modern LAN, introduced by Frost & Sullivan, aims to present a paradigm shift in LAN design for IP and the IoT. The whitepaper, available for free using the link above, offers an enhancement to traditional LAN design to address IP and IoT devices' specific needs. Today, we connect more than just data terminals, and we must design our networks accordingly. Instead of starting with the network, Modern LAN design suggests starting with the endpoint requirements and building a network to address these considerations. One of the foundations of Modern LAN design is to consider all networking innovations available. NVT Phybridge PoE innovations allow you to leverage different cable types, including coax, single-pair UTP, and multi-pair UTP cabling, to enable IoT devices at much greater distances than traditional switches. Aligned with Modern LAN design, you can transform the existing network into a robust and secure PoE backbone instead of removing and replacing the reliable infrastructure. PoE switch solutions PoE switch solutions leverage different core technology that vary in capability and effectiveness I know what you may be thinking: Am I compromising on network performance by leveraging these innovations? The answer is: it depends on the technology. PoE switch solutions leverage different core technology (Homeplug, VDSL, ADSL, Ethernet, etc.) that vary in capability and effectiveness. For more than 15 years, NVT Phybridge has been a global pioneer in long-reach PoE technology. We were the first company to develop a switch that delivered Ethernet and PoE over a single pair of UTP wire with up to 1,200ft (365m) reach, which is four times the reach of standard switches. We have spent the last 15 years surprising the industry with our capabilities and satisfying customers with our technology. Performance is paramount We understand that innovation is met with scrutiny and skepticism. We also know that some companies make claims that they cannot back up, which can sometimes shed a negative light on an entire industry or product category. However, our enterprise-grade networking solutions have helped thousands of customers modernise to the next generation of intelligent devices without high costs, complexity, or disruption to their business. For example, our CLEER24 switch is a 24-port Ethernet over Coax innovation that delivers Ethernet and PoE+ over a single coax cable with up to 6,000ft (1,830m) reach, which is 18-times the reach of a standard switch.  Transform network readiness requirements into an opportunity to grow your business! Be a thought leader, leverage Modern LAN design, and introduce NVT Phybridge PoE innovations to your customers. It's time to change the conversation around LAN design and improve the outcome for you and your customers.

Surge protection for security installations: 2017 saw increased investment
Surge protection for security installations: 2017 saw increased investment

In 2017, DITEK saw how power surges from the many natural disasters that took place damaged many businesses. In a natural disaster, or even everyday business operations, a facility’s entire investment in security, life safety and surveillance systems technology can be disabled or rendered useless in a few seconds. Surge protection solutions can mitigate those risks and protect security investments. Proactive approach to risk mitigation Throughout 2017, we also witnessed a change in how enterprises view surge protection, which included how investments are being made in surge protection to protect valuable security, life safety and surveillance systems, while also reducing downtime, manpower costs, liability vulnerabilities, and possibly compliance issues that can force businesses to actually cease operations. Effective security management is about mitigating risks. But risks cannot be mitigated without a proactive approach. Enterprises and integrators, who take the time to assess risk and to develop a strategy to incorporate effective detection, deter and response criteria to protect physical assets will be successful in 2018. 2018 and beyond That strategy includes designing surge protection into new security systems, while also adding surge protection to existing systems. Enterprises and security integrators who implement a surge protection strategy during security planning processes – or after – will be exercising prevention and mitigation, and they will be successful in 2018 and beyond.  Surge protection devices have an untapped potential for enterprise surveillance and security systems In 2017, Ditek continued to offer security end users a solid surge protection solution. We also successfully educated system integrators, who are seeking value-added products or services to incorporate into their portfolios, on the importance of surge protection devices. Educating security integrators We believe that surge protection devices have an untapped potential for enterprise video surveillance and security systems, because they can and do meet safety and security challenges that have been rarely identified in the past. We are looking forward to 2018, when we will continue to develop new surge protection products – including a new product engineered to protect up to twelve individual fuel dispensers, which is critical to the financial operation of convenience stores. We will also continue to educate security integrators about the importance of including surge protection in the design/build RFP, to not only secure an enterprise’s valuable security equipment, but also to help integrators to differentiate their capabilities and knowledge from the competition.

Latest Meyertech Ltd news

Redvision RV30 PTZ cameras now integrate with Meyertech Fusion Eclipse VMS
Redvision RV30 PTZ cameras now integrate with Meyertech Fusion Eclipse VMS

Meyertech’s FUSION Eclipse is a scalable VMS with flexible, multi-media display, storage, operator and channel expansion options Redvision’s RV30 rugged PTZ dome cameras now fully integrate with Meyertech’s Fusion Eclipse video management software. Operators can take full advantage of advanced RV30 camera functionality, including variable speed PTZ operation, with minimal joy-stick latency, which uses either mouse or Meyertech’s ZoneVu keyboards. Additionally, the RV30 wiper, IR and white light illumination switching or scheduling are enabled, with multiple pre-sets, tours and absolute dome positioning. Full HD video stream recording, with lower resolution sub-streams is also available for efficient, remote control, display and transmission. Meyertech’s FUSION Eclipse VMS Joshua Hughes, Marketing Manager at Meyertech, stated. “Meyertech’s FUSION Eclipse is a scalable VMS with flexible, multi-media display, storage, operator and channel expansion options, evolving as site requirements develop. Alongside its capability, FUSION Eclipse has the simplest and easiest VMS user interface available today. Meyertech customers, who operate in public space, retail, transport, MoD, custodial, education, stadia and industrial markets, can now include RV30 rugged cameras in their systems.” Redvision rugged PTZ camera Dermot Grace, managing director of UK manufacturer, Redvision, added, “Redvision produces 1080p and 720p resolution models of the RV30 X-SERIES rugged PTZ camera range. The 1080p model will view events at distances of 120 metres, with operators identifying people at 40m. The 720p model, although lower resolution, has a 150m range, with operators identifying people at an incredible 60 metres. FUSION Eclipse gives customers a recording and control platform for the X-SERIES. Meyertech understands our customer’s applications and is as strong and well-established as we are in the local authority and public space markets.”

Redvision integrates RV30 camera range with Meyertech FUSION-Eclipse video management software
Redvision integrates RV30 camera range with Meyertech FUSION-Eclipse video management software

Full HD video stream recording with lower resolution sub-stream enables efficient, remote control, display, and transmission Redvision's RV30 rugged PTZ dome cameras now fully integrate with Meyertech's ZoneVu keyboards. Additionally, the RV30 wiper, IR and white light illumination switching or scheduling enabled, with multiple presets, tours, and absolute dome positioning. Full HD video stream recording, with lower resolution sub-stream is also available for efficient, remote control, display and transmission. FUSION-Eclipse video management software Joshua Hughes, Marketing Manager at Meyertech, stated, "Meyertech's FUSION-Eclipse is a scalable VMS with flexible multi-media display, storage, operator, and channel expansion options, evolving as site requirements develop. Alongside its capability, FUSION-Eclipse has the simplest and easiest VMS user interface available today. Meyertech customers, who operate in public space, retail, transport, MoD, custodial, education, stadia, and industrial markets, can now include RV30 rugged cameras in their systems." RV30 X-Series rugged PTZ camera range Dermot Grace, Managing Director of UK manufacturer, Redvision, added, "Redvision produces 1080p and 720p resolution models for the RV30 X-Series rugged PTZ camera range. The 1080p model will view events at distances of 120 metres, with operators identifying people at 40m. The 720p model, although lower resolution, has a 150m range, with operators identifying people at an incredible 60 metres. FUSION-Eclipse gives customers a recording and control platform for the X-Series. Meyertech understands our customer's applications and is as strong and well-established as we are in the local authority and public space markets."

ISC West 2016: Veracity’s TRINITY video recording system benefits to be demonstrated
ISC West 2016: Veracity’s TRINITY video recording system benefits to be demonstrated

TRINITY is made possible by the combination of Veracity’s advanced camera code and COLDSTORE Veracity, a leading provider of innovative, intelligent solutions that solve real-world IP video challenges in transmission, storage and display, will be demonstrating the unique benefits of TRINITY™ and its simplified system architecture which records IP video directly from camera to COLDSTORE™, a surveillance storage system, uniquely and specifically designed for video surveillance. The demonstration on booth #5065 at ISC West at The Sands Expo in Las Vegas, 6-8 April 2016 will showcase an increasing number of vendors that allow third-party software applications to be run inside their IP cameras. Examples include models from Samsung Techwin, Axis Communications, Hikvision, AMG Panogenics, ISD, and UDP with many other manufacturers rapidly following suit.   Supports video analytics applications These “open platform” cameras are generally aimed at supporting video analytics applications but are, with the right software, capable of much more. Veracity has developed dedicated software for such cameras which writes video, audio and meta-data directly to a hard disk array. This “direct-to-disk” concept completely removes the need for NVR servers resulting in substantial savings on server hardware and NVR software licences whilst simultaneously reducing system complexity and increasing system resilience. “The front-end client system can be anything from a simple PC playback system to a full-blown, broadly-integrated PSIM operator workstation” says Alastair McLeod, Group CEO of Veracity. “We call this simple system architecture TRINITY™, and it’s an ideal solution for unmonitored or remote access systems”. TRINITY™ is made possible by the combination of Veracity’s advanced camera code and the COLDSTORE™ surveillance storage system, uniquely and specifically designed for video surveillance. The lifetime cost of system ownership is further reduced, thanks to the increased disk reliability of COLDSTORE by a factor of 20, and its very low power consumption at 0.5W per TB. Simplified video management system TRINITY™ recordings can be played back by Veracity’s own VIEWPOINT™ Player utility or, more significantly, by any third-party PSIM or VMS front-end system which incorporates the simple TRINITY™ Media SDK. Example PSIMs which are integrated with TRINITY™ include ISM, Meyertech, Visual Management Systems, i-Comply and Synectics. The result is a simplified, serverless, robust, highly scalable and very cost-effective video management system with innovative features such as camera-level fail-over, optional dual-stream or redundant recording, resilience to network interruptions via internal camera recording, and all the existing benefits of the highly successful and award-winning COLDSTORE™ surveillance storage system. Veracity’s storage products will also be demonstrated at the Hanwha Techwin America booth #14079 and at the Digital Watchdog booth #17089. Veracity is Hanwha Techwin America’s Integration Partner of the Year 2015.