DSC Perimeter protection

DSC AML-770B loop isolator module can be used to isolate burglary detectors from fire detectors on the same wire run.

Photoelectric smoke detector Provides alerts for smoke, tamper and device low battery Visible link quality indication shown on the device Fully supervised Maintenance and battery condition indication Built in 85db Alarm Buzzer

DSC WS4926 wireless photoelectric smoke detector features automatic drift compensation, built-in 85dB horn, local test button, low profile design, high/low sensitivity reporting, easy-maintenance removable smoke chamber and long-life lithium batteries included. The detector is UL/ULC listed for residential applications.

DSC TL255 internet alarm communicator features panel remote uploading & downloading via internet/intranet, supervision heartbeat via internet/intranet,128 Bit AES encryption, full event format and SIA and contact ID protocol.

Built-in reed switch Wafer-thin profile Long-life lithium battery included 16 mm (5/8") magnet gap Includes double-sided tape Reliable 868 MHz technology

The WS8965W tri-zone wireless door/window contact adds value to any installation by providing installers with three zones and reliable 868 MHz technology. The device can be mounted in the traditional manner, or if that is inconvenient for applications such as garage doors, it can be configured for normally closed “tilt switch” operation. In addition, the WS8965W has two normally closed external contact inputs that can be used for additional hardwired contacts or other dry contact switches. The internal contact provides a generous magnet gap of 13 mm (1/2”) and flexibility during difficult installations as it easily accommodates larger doors or window frames.

DSC WS4913 wireless detector provides frontline protection against the silent threat of carbon monoxide poisoning. It features electrochemical sensing technology.

New to the DSC family of wireless sensors, the WS4985 flood detector is a wireless detector designed to work with the Alexor wireless panel as well as DSC 1-Way wireless receivers. The WS4985 flood detector senses the presence of water in basements, laundry rooms, bathrooms, kitchen and numerous other areas where water may leak or flood, prompting advance warning of potential flooding.

In combination with DSC's 2-Way wireless security suite, the WS8913 EU carbon monoxide detector provides front line protection against the silent threat of carbon monoxide poisoning. WS8913 EU’s wireless function offers the transmission of important messages to the panel, through either explicit or generic trouble indications, including: trouble, endof-life (EOL), tamper and battery conditions.

The WS8945W is designed for dependable case-tamper or walltamper detection. It’s streamline profile and new design allows for double-sided tape mounting. WS8945W features a pre-installed battery that is activated by installers through a pull tab. This helps reduce installation time as casings don’t need to be opened for battery insertion. Simply draw the activation pull tab and mount the contact.

DSC WS4945 wireless door/window contact is designed for dependable case- or wall-tamper detection. Depending on how the contact is purposed, it will send a signal to the alarm system if either its casing is opened or if it is forcibly removed from a wall. If the alarm system is armed when this occurs, an alarm will be activated and the central station will be notified of the violation (if programmed to do so). The WS4945 also features an external contact input that allows a standard hardwired door to be connected to it. The contact features a pre-installed battery that is activated by installers through a pull tab. This helps reduce installation time.

DSC WS4975 wireless vanishing door/window contact is built with reliable 433 MHz technology, uses a long-life lithium battery and is compatible with all current DSC wireless receivers. The WS4975W is housed within a compact casing that allows it to be used for the tightest-fitting installations.

DSC offers 3G2060R HSPA wireless alarm communicator. When connected to a DSC PowerSeries PC1864/1832/1616 control panel, alarm reporting paths can be combined through the Public Switched Telephone Network (PSTN) if so desired, plus the HSPA channels. It conveniently utilises the HSPA network as back-up to ensure high speed, reliable and secure alarm communications. With the HSPA backup feature, any concerns about the possibility of phone line disruption is removed. The 3G2060R offers full data reporting and remote management for installers, saving time and reducing costs.

The 3G3070 connects the alarm control panel to the HSPA network and reports alarm signals directly to a monitoring station receiver (Sur-Gard System I/II/III/IV). The 3G3070 uses the HSPA network to ensure lowcost, high-speed and reliable alarm communications and is compatible with control panels that communicate using the Contact ID format. The 3G3070 is installed between the telephone connection of a control panel and telephone line. When used in a backup role, the communicator assesses the connection to the PSTN phone line, and if that has failed, it then connects to the HSPA network to send an alarm signal to the monitoring station. In a primary role, the communicator simply sends the alarm transmission over the HSPA network immediately.

The 3G3070CF connects the alarm control panel to the HSPA network and reports alarm signals directly to a monitoring station receiver (Sur-Gard System I/II/III/IV). The 3G3070CF uses the HSPA network to ensure lowcost, high-speed and reliable alarm communications and is compatible with control panels that communicate using the Contact ID format. The 3G3070CF is compliant with the latest requirements for communications methods as per UL864 and NFPA72 2010 edition. It can be used in fire monitoring applications as a single communications technology, in which case any failure of the communications path shall be annunciated at the supervising station within 5 minutes of the failure, or it can be used as part of a multiple communications technologies.

DSC SS-102 shock sensor is a unique bi-colored LED to indicate minor or major attacks, full anti-tamper protection, a moisture-resistant electronics module, and an analyzer that enables sensitivity adjustment of the sensor. It has high immunity to low-frequency false alarms and radio interference. SS-102 has the ability to detect and analyse seismic vibrations caused by attempted break-ins before the intruder is able to enter the premise. The sensor is ideal for residential, commercial, government buildings and financial facilities.

DSC FSA-210 wired photoelectric smoke detector incorporates a low-profile design and features that help reduce false alarms and provide consistent smoke detection. The detector offers a built-in alarm horn, integral dualsensor heat detection, automatic drift compensation and an easy-maintenance removable chamber. The FSA-210 detector is UL/ULC/CSFM/MEA/EN listed for commercial and residential applications, and is compatible with all DSC control panels.

DSC FSB-210BT photoelectric smoke detector incorporates a low profile design and features that help reduce false alarms and provide reliable smoke detection. The detector includes automatic drift compensation, self-diagnostics, and easy-maintenance removable chambers. Precise and quick sensitivity testing is easily accomplished with the handheld test meter (FSD-100). The detector is UL listed for commercial and residential applications.

DSC FSB-210B photoelectric smoke detector incorporates a low profile design and features that help reduce false alarms and provide reliable smoke detection. The detector includes automatic drift compensation, self-diagnostics, and easy-maintenance removable chambers. Precise and quick sensitivity testing is easily accomplished with the handheld test meter (FSD-100). The detector is UL listed for commercial and residential applications.

DSC FSA-410 wired photoelectric smoke detector incorporates a low-profile design and features that help reduce false alarms and provide consistent smoke detection. The detector offers a built-in alarm horn, integral dualsensor heat detection, automatic drift compensation and an easy-maintenance removable chamber. The FSA-410 detector is UL/ULC/CSFM/MEA/EN listed for commercial and residential applications, and is compatible with all DSC control panels.

DSC LC-124-PIMW is a dual-technology motion detectors that combine passive infrared and microwave detection with pet immunity. The detector features unique microwave motion sensor module with micro-strip patch antenna and digital signal analysis.

DSC WS4904P wireless passive infrared detector achieves superior detection and false alarm prevention through digital signal analysis. The detector’s technology adapts to changing environmental conditions by adjusting critical detection parameters to provide improved consistency of detection over all temperature ranges.

DSC EC301D PIR motion detector use a digital, microprocessor-controlled Fresnel lens to deliver stable and accurate detection without sacrificing catch performance. The detector features digital signal analysis for consistent detection throughout the coverage pattern.

Coverage area – 50ft (15m), 90° Mirror optics offer exceptionally high detection sensitivity and immunity to false alarms Vandal-resistant design (Small, recessed and robust slot window) Easy to install - no vertical adjustment needed Front and Back tamper

DSC EC301DP PIR motion detector uses a digital, microprocessor-controlled Fresnel lens to deliver stable and accurate detection without sacrificing catch performance. The detector features digital signal analysis for consistent detection throughout the coverage pattern. EC301DP detector's vertical beam shaping (VBS) provides pet immunity.

Visible link quality indicator on device Minimizes false alarms while ensuring effective detection of real threats Octa-Quad Technology Vandal-resistant design Black mirror optics for exceptionally high immunity to false alarms

DSC LC-105-DGB glassbreak detector distinguishes the sounds of breaking glass from other common sounds found in homes and businesses. It features digital signal analysis and detects the sound of all types of breaking framed glass. LC-105-DGB has a phased frequency detector sensor and is able to adjust sound sensors separately.

DSC LC-102-PIGBSS combines proven digital PIR and glassbreak detection technology with intelligent ASIC signal analysis. The detector features Quad Linear Imaging Technology for sharp analysis of body dimensions and differentiation from backgrounds and pets. It also features ABS plastic for shock and impact protection. It has separate PIR and glassbreak sensitivity adjustment. The detector also have 2 independent relay outputs for glassbreak and PIR alarm signals.