IDS Imaging Development Systems GmbH News

IDS’ industrial cameras integrate with Schuler’s Visual Die Protection solution to offer intelligent tool protection

Boosting efficiency through digitalisation, almost no branch of industry can evade it. Also operators of press shops are increasingly networking their production. But, regardless of whether it’s a single press or press lines, it’s not always necessary to replace the entire plant, in order to stay up to date. Retrofitting existing lines, true to the principle of ‘sensible evolution instead of cost-intensive revolution’, is often the order of the day. With Visual Die Prote...

IDS to unveil new high-resolution sensor cameras, uEye XCP, uEye XLE, uEye Warp10 and Ensenso S, at VISION 2021 event

From precise monitoring to picking and automation, there are countless applications that benefit from reliable image information. However, what can be done, when there is only a tight budget for the realisation of such an application? With the introduction of uEye XCP, uEye XLE and Ensenso S, globally renowned camera specialist, IDS (IDS Imaging Development Systems GmbH) proves that industrial-grade image processing technology does not have to be expensive. For users, who need a camera for part...

IDS Imaging Development Systems exceeds industry expectations in the first half and expects high growth by the end of 2021

The South German industrial camera manufacturer IDS Imaging Development Systems GmbH was able to exceed industry expectations in the first half of 2021. Instead of the 7% increase in the turnover forecast by the VDMA for the machine vision industry, the company has so far generated more than double this growth. The camera manufacturer from Obersulm expects consistently high growth until the end of 2021. The positive order situation and the strong development of foreign business give the camera...

IDS expands Ensenso 3D camera portfolio in the lower price segment

Introducing Ensenso S, camera manufacturer IDS Imaging Development Systems shows that the use of industrial-grade 3D technology does not have to be expensive. The 3D camera is particularly suitable for 3D applications that require budget-friendly, easy-to-integrate, and industrial-grade camera technology. The new Ensenso S10 has an ultra-compact, IP65/67-protected housing and generates 3D data using laser point triangulation, supported by artificial intelligence. This makes the camera suitable...

IDS Imaging Development Systems GmbH, Fizyr, MVTec and urobots with sessions at the 3-in-1 focus event on July 20th

The demand for robot-based automation of pick-and-place applications in logistics, warehousing, commissioning or packaging is high. If the objects to be processed vary greatly in shape, size, colour, or position, either complex teach-in procedures are required – or the challenge is solved with intelligent image processing software. This can help robots to reliably identify even unknown objects and find the best gripping positions for picking. On July 20th, the IDS Vision Channel will disc...

IDS Imaging Development Systems GmbH unveils new uEye FA industrial cameras for special requirements in factory automation

IDS Imaging Development Systems GmbH has announced the release of the uEye FA industrial cameras that are particularly robust and therefore, ideally suited for demanding environmental conditions, for example in factory automation. uEye FA industrial cameras Starting in August 2021, IDS will offer three new sensors in the family, which include the 12 MP (IMX226) and 20.44 MP (IMX183) Sony sensors that are true high performers with high resolution and low noise. For special requirements, the com...

IDS to host a focus event ‘Capture the Light’ along with their image processing experts

For the successful implementation of image processing applications, it is not only important to choose the right camera and a suitable image sensor. In order to capture light without interference and convert it into usable information, suitable optics and high-quality filter glasses also play a decisive role. The focus event ‘Capture the Light’ on June 24th at 2 p.m. BST addresses this topic in three exciting sessions. Over the course of around 90 minutes, participants can expect an...

IDS marks sustainability as an essential part of the corporate strategy and walks towards being a climate-neutral company

Energy and resource efficiency are the focus of the industrial camera manufacturer IDS Imaging Development Systems GmbH. As a globally active technology company, sustainability is an essential part of the corporate strategy. "Technological progress and responsible entrepreneurship go hand in hand for us," explains Jan Hartmann, Managing Director of the Obersulm-based camera manufacturer. "Our sustainable, ethical business practices actively protect the environment" is one of his guiding princip...

Aprex Solutions uses IDS's camera-based cap control solution with AI to protect caps

Strong price pressure combined with high-quality requirements - the beverage and bottle industry faces the classic dilemma of many industries. This is also the case in the quality control department of a French manufacturer of plastic caps. Reliably detecting cracks and micro-cracks on plastic caps in 40 different colours and shades running at high speed on a production line is a real challenge. APREX Solutions from Nancy, France has successfully achieved this goal with the help of image proces...

IDS Imaging Development Systems’ industrial cameras ensure high quality of vaccine containers

Combating the COVID-19 (coronavirus) pandemic is at the top of the global agenda and providing vaccine to populations around the globe means providing around 8 billion doses - with only one for every person in the world. In addition to the availability of the vaccine, a decisive factor in the race against time is the disposability of the glass vials. Medical-grade vaccine vials The glass must be resistant to a wide range of chemicals and temperature changes To ensure that the mass vaccinatio...

IDS launches a knowledge platform for topics related to image processing with 2D, 3D and AI

‘Knowledge increases when it is shared’ – following this maxim, IDS is making its expertise as one of the manufacturers of digital industrial cameras free of charge and directly accessible on a new platform. In addition to online events, useful tools such as calendars and live chats, the IDS Vision Channel also offers a media library with recordings of past events and additional, exclusive content. The online sessions address image processing topics around 2D, 3D and embedded...

IDS expands their headquarters in Obersulm-Willsbach to provide an ultra-modern workplace for the employees

IDS Imaging Development Systems GmbH expands their headquarters in Obersulm-Willsbach – after a construction period of about one and a half years, the technology centre b39 could be moved into. "Despite COVID 19, the work went almost without a hitch," says managing director Jan Hartmann. "We are very pleased that with the new building we can provide our employees with an ultra-modern and at the same time very attractive place to work.” With more than 4,500 square metres of total spa...