CDV UK Intercom: Audio, Video Intercom Systems

The statistics are staggering. The death tolls are rising. And those who now fear environments that were once thought to be safe zones like school campuses, factories, commercial businesses and government facilities, find themselves having to add the routine of active-shooter drills into their traditional fire drill protocols. The latest active shooter statistics released by the FBI earlier this year in their annual active-shooter report designated 27 events as active shooter incidents in 2018. The report reveals that 16 of the 27 incidents occurred in areas of commerce, seven incidents occurred in business environments, and five incidents occurred in education environments. Deadly active-shooter events Six of the 12 deadliest shootings in the country have taken place in the past five years Six of the 12 deadliest shootings in the country have taken place in the past five years, including Sutherland Springs church, Marjory Stoneman Douglas High School, the San Bernardino regional center, the Walmart in El Paso and the Tree of Life Synagogue in Pittsburgh, which have all occurred since 2015. Although these incidents occurred in facilities with designated entry points common to churches, schools and businesses, the two most deadly active-shooter events since 2015 were the Route 91 Harvest music festival shooting in Las Vegas that left 58 dead and the Pulse nightclub killings in Orlando where 49 perished. As Christopher Combs, special agent in charge of the FBI field office in San Antonio, Texas, said during a news conference following the August 31 mass shooting in Odessa, Texas that claimed seven lives: “We are now at almost every two weeks seeing an active shooter in this country." Active shooter incidents Between December 2000 and December 2018, the FBI’s distribution of active shooter incidents by location looks like this: Businesses Open to Pedestrian Traffic (74) Businesses Closed to Pedestrian Traffic (43) K-12 Schools (39) Institutions of Higher Learning (16) Non-Military Government Properties (28) Military Properties—Restricted (5) Healthcare Facilities (11) Houses of Worship (10) Private Properties (12) Malls (6) What the majority of these venues have in common is they all have a front entrance or chokepoint for anyone entering the facilities, which is why any active-shooter plan must include a strategy to secure that entry point. Situational awareness in perimeter and door security Preventing people with the wrong intentions from entering the space is the goal" According to Paul Franco, an A&E with more than 28 years of experience as a consultant and systems integrator focusing on schools, healthcare and large public and private facilities, that while active shooter incidents continue to rise, the residual effect has been an increase in situational awareness in perimeter and door security. “Certainly, protecting people and assets is the number one goal of all our clients. There are multiple considerations in facilities like K-12 and Healthcare. Preventing people with the wrong intentions from entering the space is the goal. But a critical consideration to emphasise to your client is getting that person out of your facility and not creating a more dangerous situation by locking the person in your facility,” says Franco. High-security turnstiles “Schools today are creating a space for vetting visitors prior to allowing access into the main facility. Using technology properly like high-security turnstiles offer great benefits in existing schools where space constraints and renovation costs can be impractical.” What steps should they be taken when recommending the proper door security to ensure the building is safe As a consultant/integrator, when discussions are had with a client that has a facility in a public space like a corporate building, government centre or industrial facility, what steps should they be taken when recommending the proper door security to ensure the building is safe and can protect its people and assets? For Frank Pisciotta, President and CEO of Business Protection Specialists, Inc. in Raleigh, North Carolina, a fundamental element of his security strategy is making appropriate recommendations that are broad-based and proactive. Properly identifying the adversaries “As a consultant, my recommendations must include properly identifying the adversaries who may show up at a client’s door, the likelihood of that event occurring, the consequences of that event occurring, determining if there are tripwires that can be set so an organisation can move their line of defence away from the door, educating employees to report potential threats and creating real-time actionable plans to respond to threats. A more reactionary posture might include such thing as target hardening such as ballistic resistant materials at entry access points to a facility,” Pisciotta says. Veteran consultant David Aggleton of Aggleton & Associates of Mission Viejo, California recommends that clients compartmentalise their higher security areas for limited access by adding multiple credential controls (card + keypad + biometric), along with ‘positive’ access systems that inhibit tailgating/piggybacking such as secure turnstiles, revolving door and mantrap if your entrances and security needs meet the required space and access throughput rates. Integrated solution of electronic access control Defining a single point of entry in some public facilities is becoming the new standard of care according to many A&Es and security consultants, especially in a school environment. This approach allows a concerted effort when it comes to staffing, visitor monitoring and an integrated technology solution. The bottom line remains: most buildings are vulnerable to a security breach A proactive stance to securing a door entryway will use an integrated solution of electronic access control, turnstiles, revolving doors and mantraps that can substantially improve a facility’s security profile. The bottom line remains: most buildings are vulnerable to a security breach, so it’s not a matter of if there will be a next active shooter tragedy, it’s only a matter of where. Enhancing access control assurance “There is no easy answer to this question,” says Pisciotta referring to how a secured entrance can deter an active shooter. “There have been at least two high-profile incidents of adversaries shooting their way into a facility through access control barriers. So, if the threat so dictates, a ballistic resistant might be required.” He concludes: “There is obviously no question that turnstiles, revolving doors and man traps enhance access control assurance. Electronic access control is easy to integrate with these devices and providing that credentials are secure, approval processes are in place, change management is properly managed and the appropriate auditing measures in place, access control objectives can be met.”

For the past several years, there has been a focus by integrators and customers to assure that their card-based access control systems are secure. To give businesses an extra incentive to meet their cybersecurity threats, the Federal Trade Commission (FTC) has decided to hold the business community responsible for failing to implement good cybersecurity practices and is now filing lawsuits against those that don't. For instance, the FTC filed a lawsuit against D-Link and its U.S. subsidiary, alleging that it used inadequate safeguards on its wireless routers and IP cameras that left them vulnerable to hackers.Many companies perceive that they are safer with a card but, if done correctly, the mobile can be a far more secure option  Now, as companies are learning how to protect card-based systems, such as their access control solutions, along comes mobile access credentials and their readers which use smart phones instead of cards as the vehicle for carrying identification information. Many companies perceive that they are safer with a card but, if done correctly, the mobile can be a far more secure option with many more features to be leveraged. Handsets deliver biometric capture and comparison as well as an array of communication capabilities from cellular and Wi-Fi to Bluetooth LE and NFC. As far as security goes, the soft credential, by definition, is already a multi-factor solution. Types of access control authentication Access control authenticates you by following three things: Recognises something you have (RFID tag/card/key), Recognises something you know (PIN) or Recognises something you are (biometrics). Your smart phone has all three authentication parameters. This soft credential, by definition, is already a multi-factor solution. Your mobile credentials remain protected behind a smart phone's security parameters, such as biometrics and PINs. Organisations want to use smart phones in their upcoming access control implementations Once a biometric, PIN or password is entered to access the phone, the user automatically has set up 2-factor access control verification - what you know and what you have or what you have and a second form of what you have.                 To emphasise, one cannot have access to the credential without having access to the phone. If the phone doesn’t work, the credential doesn’t work. The credential operates just like any other app on the phone. The phone must be “on and unlocked.” These two factors – availability and built-in multi-factor verification – are why organisations want to use smart phones in their upcoming access control implementations. Smart phone access control is secure Plus, once a mobile credential is installed on a smart phone, it cannot be re-installed on another smart phone. You can think of a soft credential as being securely linked to a specific smart phone. Similar to a card, if a smart phone is lost, damaged or stolen, the process should be the same as with a traditional physical access credential. It should be immediately deactivated in the access control management software - with a new credential issued as a replacement. Your mobile credentials remain protected behind a smart phone's security parameters, such as biometrics and PINs Leading readers additionally use AES encryption when transferring data. Since the Certified Common Criteria EAS5+ Computer Interface Standard provides increased hardware cybersecurity, these readers resist skimming, eavesdropping and replay attacks.            When the new mobile system leverages the Security Industry Association's (SIA) Open Supervised Device Protocol (OSDP), it also will interface easily with control panels or other security management systems, fostering interoperability among security devices.All that should be needed to activate newer systems is simply the phone number of the smart phone Likewise, new soft systems do not require the disclosure of any sensitive end-user personal data. All that should be needed to activate newer systems is simply the phone number of the smart phone. Bluetooth and NFC the safer options Bottom line - both Bluetooth and NFC credentials are safer than hard credentials. Read range difference yields a very practical result from a security aspect. First of all, when it comes to cybersecurity, there are advantages to a closer read range. NFC eliminates any chances of having the smart phone unknowingly getting read such as can happen with a longer read range. There are also those applications where multiple access readers are installed very near to one-another due to many doors being close. One reader could open multiple doors simultaneously. The shorter read range or tap of an NFC enabled device would stop such problems. However, with this said in defence of NFC, it must also be understood that Bluetooth-enabled readers can provide various read ranges, including those of no longer than a tap as well. One needs to understand that there are also advantages to a longer reader range capability. Since NFC readers have such a short and limited read range, they must be mounted on the unsecure side of the door and encounter all the problems such exposure can breed. Conversely, Bluetooth readers mount on the secure sides of doors and can be kept protected out of sight. Aging systems could cause problems Research shows that Bluetooth enabled smart phones are continuing to expand in use to the point where those not having them are already the exceptions With that said, be aware. Some older Bluetooth-enabled systems force the user to register themselves and their integrators for every application. Door access – register. Parking access – register again. Data access – register again, etc. Newer solutions provide an easier way to distribute credentials with features that allow the user to register only once and need no other portal accounts or activation features. By removing these additional information disclosures, vendors have eliminated privacy concerns that have been slowing down acceptance of mobile access systems. In addition, you don’t want hackers listening to your Bluetooth transmissions, replaying them and getting into your building, so make very sure that the system is immunised against such replays. That’s simple to do. Your manufacturer will show you which system will be best for each application. Research shows that Bluetooth enabled smart phones are continuing to expand in use to the point where those not having them are already the exceptions. They are unquestionably going to be a major component in physical and logical access control. Gartner suggests that, by 2020, 20 percent of organisations will use mobile credentials for physical access in place of traditional ID cards. Let’s rephrase that last sentence. In less than 18 months, one-fifth of all organisations will use the smart phone as the focal point of their electronic access control systems. Not proximity. Not smart cards. Phones!

Throughout the UK there are many examples of smart city transformation, with key industries including transport, energy, water and waste becoming increasingly ‘smart’. A smart city is a one that uses information and communication technologies to increase operational efficiency, share information with the public and improve both the quality of government services and resident welfare. Smart access is an important step forward in providing technologically advanced security management and access solutions to support the ambitions of smart cities and their respectively smart industries. Explaining smart access If we used the standard definition of smart, it would be to use technology to monitor, control and manage access, but the technology must be adapted to both the physical and management characteristics of smart cities. Smart access is an important step forward in providing advanced security management and access solutions to support the ambitions of smart cities For example, it would not make sense to install an iris biometric sensor at an isolated water storage tank, which is out in the open and may not even have electrical power. Nor would a permissions management system work, one that does not let you update permissions simply and easily and cannot be customised. With high volumes of people entering and exiting different areas of the city, it is important to be able to trace who has been where, when and for how long. Advanced software suites can provide access to all operations performed by users, including a complete audit trail. This information is often used by business owners or managers for audits, improvements or compliance. When initiating a new access control system it is important that the supplier and customer work together to understand: Who can enter a secure area Where in the building each individual has access to When an individual can enter a secure area How an individual will gain access to a secure area This information can be crucial in the event of a security breach, enabling investigators to find out who was the last known key holder in the building and what their movements were whilst there. Installing an electronic lock does not require electrical power or batteries, much less a connection to send information Modernising locks and keys Installing an electronic lock does not require electrical power or batteries, much less a connection to send information, which means that it can be installed on any door as you would a mechanical lock without maintenance requirements. Permissions are stored within an intelligent key. If you have authorisation for that lock, it will open. If you don’t, you won’t be allowed to enter and all of the activity carried out by the key will be recorded. You can update permissions from a computer or using an app on a mobile phone at the time of access, which will update the key's permissions via Bluetooth. This allows shortened validity periods, constrains movements to be in line with company access policy and removes travel and fixed authoriser costs. This then delivers increased flexibility and higher levels of security. Remote access control utilities Access rights can be set at any time and on any day, and if required can allow access on just one specific occasion Using an app improves access control by updating access rights in real time with the Bluetooth key. It also provides notification of lost keys, joint management of access schedules, protection of isolated workers and much more. Combined with new technological solutions, an app allows contextual information to be sent, such as on-site presence, duration of an operation, authorisations and reporting of anomalies. Access rights can be set at any time and on any day, and if required can allow access on just one specific occasion, for example to repair a failure. Access can be restricted to enable entry only during working hours, for example. Permissions can be granted for the amount of time required, which means that if permission is requested to access a site using a mobile app, the company should be able to access it, for example, in the next five minutes. Once this time has passed, the permission expires and, if a key is lost or it is stolen, they will not be able to access the site. The rules for granting permissions are infinite and easily customisable, and the system is very efficient when they are applied; as a result, the system is flexible and adapted to suit company processes and infrastructures. Using an app improves access control by updating access rights in real time with the Bluetooth key Finding applications to create solutions In many cases, companies themselves find new applications for the solution, such as the need to obtain access using two different keys simultaneously to prevent a lone worker from accessing a dangerous area. The software that manages access makes it smart. It can be used from a web-based access manager or through personalised software that is integrated within a company's existing software solution, to automatically include information, such as the employee's contractual status, occupational risk prevention and the existence of work orders. In some companies, the access management system will help to further improve service levels by integrating it with the customer information system, allowing to link it for instance with alarms managers, intrusion managers or HR processes. With over one million access points currently secured worldwide, this simple and flexible solution will play a strategic role in the future of security.

 Access control management system, LinkNet ideal for large scale installations ADI-GARDINER (UK) announced an exclusive distribution agreement with CDV to supply the LinkNet access control management system in the UK, designed to make IP (Internet Protocol) technology more accessible. LinkNet is a comprehensive access control management system that facilitates interaction with IP interfaces.  It incorporates software and hardware solutions which allow the reading of all standard technologies, as well as biometric fingerprint identification and verification.The LinkNet system can accommodate up to 128 readers and 2048 cardholders, making it ideal for large scale installations.  The simple architecture of the system makes it easy to incorporate into any IP infrastructure and, by making use of existing IT structured cabling systems, hubs and bridges, LinkNet can also minimise installation costs."We have been working together with ADI-GARDINER for over 10 years and this latest collaboration will allow us to make IP technology accessible to more customers," says Alan Walker, Managing Director of CDV (UK).Glenn Davies, Access Control Product Manager at ADI-GARDINER, comments, "We are very pleased to continue our strong relationship with CDV in the access control market by exclusively distributing the LinkNet system in the UK."

Thanks to its international operations and continuous development, CDVI is confirming its position as a leader in the access control and locking solutions industry.Since its creation in 1985, manufacturer of access control and locking solutions CDVI has developed strongly and now has around 20 production and distribution subsidiaries across the globe, which unites around well-known brands and a powerful identity - the "CDV Group".Due to a products strategy favouring innovation and high-tech solutions (biometric, Digicode®, magnetic locks, electric strikes, etc), the "CDV Group" is in a position to offer its customers around the world complete personal and property protection solutions, both for the residential environment and industrial and services premises. In order to emphasize its international scope and develop sales in markets in Luxembourg, Belgium and Holland, in 2006 the "CDV Group" launched a new distribution subsidiary, CDV Benelux.Its range of distribution subsidiaries is now enabling CDV Group to progressively reaffirm its position as a leader in the field of access control and locking solutions.  These developments reflect CDV Group's development strategy which is again due to confirm its international presence in 2007.