Idesco Access control systems & kits(6)
The Cardea System from Idesco was short listed as a finalist in the Access Control Product of the year category at the 2009 IFSEC Security Industry Awards. Award winners are published on May 12 at the Award Gala of IFSEC 2009. Idesco Cardea System is a network of devices that communicate wirelessly. It is a new product family, and it enables building of open and scalable identification systems by wireless communication. The system shows its advantage in the form of fast, flexible and cost-effective installations. The wireless Cardea system frequently takes an estimated 40 minutes per door to install, compared with an average of seven hours for any wired solution. Faster installations mean cost savings for both system installers and end users. Wireless system is an optimal solution for an office environment where a cost effective and secure access control and time & attendance system is needed. A wireless system enables easy and cost-effective expansion of an existing access control system without the need of changing the existing system structure. It also makes it also possible to build solutions with two applications easily. For instance, an identification system with access control in an office environment and parking control on the parking lot outside the building can be easily implemented, using a wireless solution. Parking control outside the building can be connected to the same system with the office access control without the need of installing any - perhaps underground - cablings. A wireless identification system, built without cabling, brings RFID solutions to applications where RFID has not been utilised before. It makes it possible to build an identification system easily in places where it is not reasonable to install cablings. Some new and innovative, interesting application examples of a wireless system installation: Temporary access control systems on construction sites, events etc. Just take the system with you after the event and re-build it in another place. Small and compact solutions with few doors and few readers and a small group of users (an office environment or a shop with workers and carriers, all having access rights within the system). Harbours and other wide areas where there are a number of readers scattered around a large area and a cabling solution is impossible to carry out. Historic buildings and other sites in which cable installations are not the most optimal solution. Installation does not require opening of constructions, and without cabling the system is invisible. The Idesco Cardea system consists of separate devices, which can operate independently or form a network, i.e. an identification system. Cardea solution supports most used RFID technologies and customers don't have to replace their existing software or ID credentials. Connected to Idesco's new innovative Access Touch touch screen terminal with an RFID reader and a computer in the same device, Cardea system builds up a modern and intelligent method of collecting and analysing identification data. For more information please visit: www.idesco.fi/ or contact: email@example.com Tel. +358-20-7434175Add to Compare
With Idesco's redesigned wireless EPC reader you can create secure, cost-effective and user-friendly identification applications for vehicle identification (AVI), logistics systems, access control and even limited inventory control. The Idesco® EPC Reader is a passive long-distance UHF RFID reader, compliant with European UHF (ultra-high frequency) standards. In its basic configuration, Idesco's EPC Reader employs an internal, circularly-polarized antenna for interrogating tags presented at any angle. However, this reader may also be configured with either an external antenna or both the internal and external antenna. When the EPC Reader is configured with two antennas, both may transmit and receive data/information simultaneously - or one antenna may be programmed to transmit while the other receives. True to form, Idesco's EPC reader is configurable to a variety of communication interfaces (e.g. Wiegand, RS232-485, Ethernet-IP67, 6LowPan, etc.) and with an enviable array of security options for easier integration into your existing system. The EPC Reader provides four I/O ports for addressing peripherals and is engineered to allow reliable deployment both indoors and outdoors. Additionally, Idesco® EPC tags can be customized with both EPC and MIFARE® enabling a single card to provide both vehicle and personal identification. Easy to install, the EPC Reader initiates polling automatically (by default) upon being powered up; it does not require polling commands to be entered first. However, it is also configurable to await an activating command from an external system. Some ideal deployments for the Idesco® EPC Reader include - but are not limited to - automatic vehicle identification (e.g. parking access control, toll tracking, entry gates, harbour moorings), logistics centers (pallet and case tracking), long distance access control (sequestered reader) and certain inventory control applications.Add to Compare
Browse Access control systems & kits
Access control system products updated recently
Gallagher 2 Door Kit - PoE+ for distributed one to two door access control using an Ethernet connection
Should ‘Made in China’ be seen as a negative in security systems and products? It’s an important and complex issue that merits a more detailed response than my recent comment in the Expert Panel Roundtable. For me, there are two sides of the answer to this question: Buying products that have certain negative attributes that are not in alignment with some part of a belief system or company mandate. Buying products that do not perform as advertised or do something that is unacceptable. For integrators and end users making the buying decisions, the drive to purchase products may not be based on either aspect and instead on the product that can do the best job for their business. But for others, a greater emphasis on the ethical implications of purchasing decisions drives decision-making. What is ethical consumption? Ethical consumption is a type of consumer activism that is based on the concept of ‘positive buying’ in that ethical products are favouredEthical consumption — often called ethical consumerism — is a type of consumer activism that is based on the concept of ‘positive buying’ in that ethical products are favoured, and products that are ethically questionable may be met with a ‘moral boycott’. This can be as simple as only buying organic produce or as complex as boycotting products made in a totalitarian regime that doesn't offer its citizens the same freedoms that we enjoy in the United States. Consider the goals of the Boston Tea Party or the National Consumers League (NCL), which was formed to protect and promote social and economic justice for consumers and workers in the United States and abroad. Some examples of considerations behind ethical consumption include fair trade, treatment of workers, genetic modification, locally made and processed goods, union-made products and services, humane animal treatment, and in general, labour issues and manufacturing practices that take these factors into account. Increase in ethical consumption The numbers show that ethical consumption is on the rise. In a 2017 study by Unilever, 33 percent of consumers reported choosing to buy and support brands that they believe are doing social or environmental good. In the same study, 53 percent of shoppers in the United Kingdom and 78 percent in the United States said they feel better when they buy products that are ‘sustainably’ produced. There’s clear evidence that products from some Chinese companies suffer from cybersecurity vulnerabilities Though the aforementioned question that sparked this conversation centres around concerns with products made in China, there are many other countries where, for example, governments/dictators are extremely repressive to all or parts of their populations, whose products, such as oil, diamonds, minerals, etc., we happily consume. There are also a number of countries that are a threat in terms of cybersecurity. It may be naive and simplistic to single out Chinese manufacturers. Impact on physical security products Product buying decisions based on factors other than product functionality, quality and price are also starting to permeate the security marketplace. While this hasn't been a large focus area from the business-to-business consumption side, it's something that should be considered for commercial security products for a variety of reasons. Hardware hacks are more difficult to pull off and potentially more devastating" There’s clear evidence that products from some Chinese companies suffer from cybersecurity vulnerabilities. Last fall, 30 U.S. companies, including Apple and Amazon, were potentially compromised when it was discovered that a tiny microchip in the motherboard of servers built in China that weren't a part of the original specification. According to a Bloomberg report, “This attack was something graver than the software-based incidents the world has grown accustomed to seeing. Hardware hacks are more difficult to pull off and potentially more devastating, promising the kind of long-term, stealth access that spy agencies are willing to invest millions of dollars and many years to get.” This, along with many other incidents, are changing the considerations behind purchasing decisions even in the physical security industry. Given that physical security products in general have been lax on cybersecurity, this is a welcome change. Combating tech-specific threats In early January, members of the U.S. Senate introduced bipartisan legislation to help combat tech-specific threats to national security posed by foreign actors and ensure U.S. technological supremacy by improving interagency coordination across the U.S. government. The bill creates the Office of Critical Technologies & Security at the White House, an indication that this issue is of critical importance to a number of players across the tech sector. Members of the U.S. Senate introduced bipartisan legislation to help combat tech-specific threats to national security posed by foreign actors To address a significant number of concerns around ethical production, there are certifications such as ISO 26000 which provides guidance on social responsibility by addressing accountability, transparency, ethical behaviour, respect for stakeholder interests, respect for rule of law, respect for international norms of behaviour and respect for human rights. While still emerging within physical security, companies that adhere to these and other standards do exist in the marketplace. Not buying products vulnerable to cyberattacks It may be counter-productive, even irresponsible, to brand all products from an entire country as unfit for purchasing. Some manufacturers’ products may be ethically questionable, or more vulnerable to cyberattacks than others; so not buying products made by those companies would make sense. The physical security industry might be playing a bit of catch up on this front, but I think we're beginning to see a shift toward this kind of responsible buying behaviour.
Users of security systems have long been willing to sacrifice certain aspects of security in favour of convenience and ease of use. The tide seems to be turning, however, with the industry at large showing significant concerns over cyber security. End user sentiments also seem to be following that trend, becoming more cautious when it comes to having their security systems connected to the internet. While it has become the norm for security systems to be accessible online, still it presents security threats that unconnected systems would not face. In 2018, we saw a notable shift from the convenience of a connected system to the less convenient, but more secure, standalone system. Consumers are willingly making the choice to trade convenience for security, and companies are responding. While cyber security concerns will continue to be a big topic of discussion, connected platforms will probably be the trend of 2019This in turn is driving an increase in more IoT-like deployments. Rather than the traditional client that is connected to a device to retrieve information, more often we are seeing more active devices, capable of reporting their presence and transmitting information on a scheduled basis, without the need for a client. Preventing security systems from outside threats This changes the dynamic of the network and alleviates many threats associated with traditional systems because there is no opportunity for outside threats to access your system since the device is transmitting information out vs requiring a connection to the outside world. With IoT deployments, when the device is active and sending messages out of the network segment, it is not vulnerable in the same way that the traditional systems are. While cyber security concerns will continue to be a big topic of discussion, connected platforms will probably be the trend of 2019. In 2018, we saw an increased acceptance in the residential market for smart home applications. While this has been an area of discussion for the past ten years, it is now gaining real traction. With artificial intelligent capabilities in tow, smart home deployments are more common than ever and the video analytics that accompany them are quite impressive. Cloud security for the commercial sector If consumers are trusting their home security systems with this, it only makes sense that they will begin trusting Google to provide security for their offices as wellIn addition to the residential market, connected platforms will likely start to impact the commercial space as well. The border between consumer and commercial user will become a little more blurred. Companies such as Google that cater primarily to home services have cloud capabilities beyond the means of many competitors, in turn giving them a favourable advantage to provide security for the cloud. If consumers are trusting their home security systems with this, it only makes sense that they will begin trusting Google to provide security for their offices as well. As far as ONVIF is concerned, we are excited to see how the market will adopt the newly released Profile T for advanced video streaming in the coming year. We are also excited to explore our relationship with the International Electrotechnical Commission (IEC), by continuing our work on giving devices the ability to communicate upwards and proactively. It is clear that the market is open to adopting models in the quest for more efficiency without sacrificing security.
Edward Snowden’s name entered the cultural lexicon in 2013, after he leaked thousands of classified National Security Agency documents to journalists. He’s been variously called a traitor, a patriot, a revolutionary, a dissident and a whistleblower, but however you personally feel about him, there’s one way to categorise him that no one can dispute: He’s a thief. There’s no doubt about it: Snowden’s information didn’t belong to him, and the scary truth is that he is neither the first nor the last employee to attempt to smuggle secrets out of a building – and we need to learn from his success to try to prevent it from happening again. Since the dawn of the digital age, we’ve fought cyber pirates with tools like firewalls, encryption, strong passwords, antivirus software and white-hat hackers. But with so much attention on protecting against cyber risks, we sometimes forget about the other side of the coin: the risk that data will be physically removed from the building. Douglas Miorandi, director of federal programs, counter-terrorism and physical data security for Metrasens, recently discussed the major risks to physical data security with SourceSecurity.com. Q: What do you believe are the main physical threats to data? The biggest threats I have seen in the physical data security space have varied over the years, but there are four specific risks that remain the same across the board for any organisation, which are: Every organisation is at risk of having data walk out the building with that employee The Insider Threat The Outsider Threat The Seemingly Innocent Personal Item Poor or Nonexistent Screening To beginning with, every company or government agency has at least one disgruntled employee working for them, whether they know it or not, and that means every organisation is at risk of having data walk out the building with that employee. That is what security experts call the insider threat. Q: What do you think influences employees to steal data from their own organisation? People steal data from their workplaces because they see some means to an end, whether it’s to expose something embarrassing or damaging due to a personal vendetta, or because they can sell it to a competitor or the media and benefit financially – meaning they don’t even need to be disgruntled; they might just want a quick way to make a buck. Financial data, too, is attractive, both for insider trading and selling to the competition. People steal data from their workplaces because they see some means to an end, whether it’s to expose something embarrassing or damaging due to a personal vendetta, or because they can sell it to a competitor or the media and benefit financially This can happen to both private companies as well as government agencies. Take Natalie Mayflower Sours Edwards for example, a Treasury Department employee who was caught in the act just last month, when she disclosed sensitive government information about figures connected to the Russia investigation to a reporter. She didn’t hack the system, she simply used a flash drive. And let’s not forget that Snowden was a contractor working for the NSA. Q: Many of us think of security threats coming from an outsider, do companies still face these type of threats? Yes. Unfortunately, organisations do not only need to worry about their own employees – companies and government agencies need to be wary of threats from outsiders. COTS devices include SD cards, external hard drives, audio recorders and even smart phones They can come in the form of the corporate spy – someone specifically hired to pose as a legitimate employee or private contractor in order to extract information – or the opportunistic thief – a contractor hired to work on a server or in sensitive areas who sees an opening and seizes it. Either one is equally damaging to sensitive data because of the physical access they have. Q: Whether it be an insider threat or an outsider threat, what are ways these individuals can steal sensitive data? There are two types of personal items that can be used to steal data: the commercially available off-the-shelf (COTS) variety, and the intentionally disguised variety. This is considered risk number three – the seemingly innocent personal item. COTS devices include SD cards, external hard drives, audio recorders and even smart phones, any of which can be used to transport audio, video and computer data in and out of a building. Intentionally disguised devices are straight out of the spy novel; they could be a recording device that looks like a car key fob, or a coffee mug with a USB drive hidden in a false bottom. Intentionally disguised devices are straight out of the spy novel; they could be a recording device that looks like a car key fob, or a coffee mug with a USB drive hidden in a false bottom Q: What is the difference between COTS and disguised devices? The difference between COTS and disguised devices is that if someone gets caught with a COTS device, security will know what it is and can confiscate it. The disguised device looks like a security-approved item anyone could be carrying into the workplace, making it especially devious. Sometimes these devices don’t just function to bring information out of a building; they are used to damage a server or hard drive once it’s plugged in to a computer or the network. Some are both – a recording device that extracts data and then destroys the hard drive. Companies with airtight cyber security protocols can sometimes fall down when it comes to physically screening peopleQ: With these types of discrete items, can security personnel still catch individuals in the act? For example, through security screenings? Poor or nonexistent screening is the most substantial security threat to any organisation when it comes to sensitive data. Whether it’s an employee, an outside contractor or a device, the physical security risks are real, and everyone and everything entering and leaving a building needs to be screened. Unfortunately, screening often isn’t occurring at all, or is ineffective or inconsistent when it does occur. Even companies with airtight cyber security protocols can sometimes fall down when it comes to physically screening people and stopping them from stealing data through recording devices. Q: It’s surprising that so many organisations would neglect physical security when protecting their data. It’s a huge mistake, and the consequences can be dire. They range from loss of customer trust, exorbitant lawsuits and tanking stock prices in the private sector; and risks to national security in the public sector. Costs and resource allocation increase as well during efforts to reactively fix or mitigate the effects of physically stolen data. For both the private and public sectors, the risk for data to be physically removed from a building has never been greater. Years ago, it was much harder for the average Joe to figure out where they could sell stolen data. Now, with the Deep Web, anyone with Tor can access forums requesting specific information from competing spy agencies, with instructions on how to deliver it, greatly reducing the risk of getting caught – and increasing the likelihood people will try it. Although it’s getting easier to sell data, the good news is that all of these threats are avoidable with the right measures. Physical data security and cybersecurity must be considered the yin and yang of an airtight policy that effectively protects sensitive or confidential assets from a malicious attack Q: So how can an organisation protect against these risks? There are a number of ways – and the first one requires a change of mindset. Not long ago, the building/physical security department and the IT/cybersecurity department were considered two different entities within an organisation, with little overlap or communication. Organisations now are realising that, because of the level of risk they face from both internal and external threats, they must take a holistic approach to data security. Physical data security and cybersecurity must be considered the yin and yang of an airtight policy that effectively protects sensitive or confidential assets from a malicious attack. Q: How can companies and government agencies combine both physical data security and cybersecurity initiatives? Physical security managers can advise cybersecurity managers on ways to reinforce their protocols – perhaps by implementing the newest surveillance cameras in sensitive areas, or removing ports on servers so that external drives cannot be used. Organisations need to create an effective program and ensure it stays effective so people know it’s not worth the hassle to try In turn, the cybersecurity team can let the physical security team know that they have outside contractors coming in to work on the server, and the physical security team can escort the contractors in and stand guard as they work. Constant communication and a symbiotic relationship between the two departments are crucial to creating an effective holistic security protocol and, once you’ve got the momentum going, don’t let it slow down. Sometimes efforts start off strong and then peter out if priorities change. When guards are down, it’s an excellent time for a malicious actor to strike. Organisations need to create an effective program and ensure it stays effective so people know it’s not worth the hassle to try. It’s not just about the mentality, though. Using the right technology is just as important. Q: What type of technology can you use to protect physical data? Many problems can be avoided by simply using the right technology to detect devices that bring threats in and carry proprietary information out. Electronics such as hard drives, cell phones, smart watches, SD cards and recording devices have a magnetic signature because of the ferrous metals inside them. Using a ferromagnetic detection system (FMDS) as people enter and exit a building or restricted area means that anything down to a small microSD card triggers an alert, allowing confiscation or further action as needed. Electronics such as hard drives, cell phones, smart watches, SD cards and recording devices have a magnetic signature because of the ferrous metals inside them Q: How does FMDS work? In the most basic terms, FMDS uses passive sensors that evaluate disturbances in the earth’s magnetic field made by something magnetic moving through its detection zone. Nothing can be used to shield the threat, because FMDS doesn’t detect metallic mass; it detects the magnetic signature, down to a millionth of the earth’s magnetic field. FMDS is the most reliable method of finding small electronics items and should be part of the “trust, but verify” model Although it is a passive technology, it is more effective and reliable than using hand wands or the walk-through metal detectors typically seen in an airport, which cannot detect very small ferrous metal objects. FMDS can see through body tissue and liquids, so items cannot be concealed anywhere on a person or with their belongings. Whether or not the items are turned on doesn’t matter; FMDS doesn’t work by detecting a signal, but rather by spotting the magnetic signature that electronics contain. This is ideal, because most recording devices do not emit any signal whatsoever. In my experience, FMDS is the most reliable method of finding small electronics items (as well as other ferrous metal objects, like weapons), and should be part of the “trust, but verify” model, in which companies assume the best of their employees and anyone else entering the building, but still take necessary precautions. Q: What are the key takeaways for organisations looking to enhance data security? The toughest challenge in the security sector – whether it’s cyber or physical – is remembering that the bad guys are constantly looking for ways to slip in through the cracks, and security departments need to stay one step ahead to ward off both internal and external threats. Recognising the existing threats, putting together a holistic security strategy, and using the right technology to detect illicit devices comprises an effective three-pronged approach to protecting an organisation’s data. Organisations cannot afford to be passive about security and assume employees won’t steal data and spies won’t sneak in. Strong countermeasures are necessary because data loss can come from both inside and outside, in both private and public sectors, from places not everyone thinks of – and with technology like FMDS acting as a backup to the human element, organisations can lock down their data and keep the wolves in sheep’s clothing from getting through the door.
Denmark’s Evotec chose Idesco readers to complete their cargo securing system they had designed for transport companies’ vehicles. Evotec’s system does more than merely preventing cargo theft. Drivers also feel more secure when delivering because hijack risks are also reduced. This is because cargo is robustly secured when drivers leave vehicles behind. Idesco 8 CD 2.0 DESFire readers Evotec selected Idesco 8 CD 2.0 DESFire readers for deployment on delivery vehicles Danish cargo companies had been struggling with regular delivery cargo thefts. Drivers did not feel secure when delivering and financial losses were growing. Evotec decided to develop a novel vehicle security solution for cargo companies. As part of their solution, Evotec selected Idesco 8 CD 2.0 DESFire readers for deployment on delivery vehicles. Idesco readers have since been installed on several hundred Danish cargo trucks and vans. Early in their design process, Evotec had seen a clear need to strictly limit access to vehicle’s cargo space to authenticated personnel only. They had known RFID technology could provide accurate, secure user identification and authentication. They learned that Idesco’s MIFARE DESFire readers, paired with 128-bit AES-encrypted DESFire transponders, would easily repel transponder hacking or cloning. Best of all, they learned Idesco designed many of its readers for installing outdoors, reliably resisting impacts, moisture, dirt and temperature extremes. Security Key Management service Idesco’s Security Key Management service saved Evotec extensive time and resources"Bo Schønning, Evotec Aps CEO, described the subsequent cooperation of Idesco with his company, “We got great assistance in choosing the correct solution for our system”. In addition to coded readers, Evotec ApS also subscribed to Idesco’s convenient Security Key Management Service for ensure compatibility with every vehicle’s readers. Since DESFire demands readers and transponders be encoded with matching security keys, Idesco’s Security Key Management service saved Evotec extensive time and resources, freeing them to focus exclusively on installations for their customers’ vehicles without worrying about managing DESFire keys themselves. “We feel safe when Idesco handles this data for our customers”, says Bo Schønning. The cargo drivers of Evotec’s customers are assigned vehicle specific transponders to carry, which open the cargo space when presented to the reader guarding it. For increased security, the driver cabin locks automatically when the cargo space unlocks. Additionally, cargo doors automatically lock when they close and will remain locked when the vehicle’s engine is running. The system works equally well in vehicles equipped with liftgates. Opening the vehicle’s driver cabin with the ignition key doesn’t affect its cargo space: it remains continuously locked. If needed, a vehicle’s cargo space could be opened remotely via fleet management software. If a transponder is stolen, a vehicle’s readers can be reprogrammed to not recognise the transponders. Fleet management and vehicle tracking Vehicles are also equipped with GPS transmitters that update fleet software with vehicle locations and routes Vehicles are also equipped with GPS transmitters that update fleet software with vehicle locations and routes. The fleet software’s online tracking and route reporting also provides cargo companies a powerful fuel control ability that can reduce fleet costs. “This system has significantly increased drivers’ security at work while reducing costs caused by theft”, notes Bo Schønning, CEO, Evotec ApS. “Fuel costs have also been reduced, as the cars aren’t left idling anymore. It is easier to control the fleet, and our customers can also follow the quality of deliveries with this system”, he continues.” RFID technology Founded in 1989, Idesco is an experienced company in the field of RFID technology. From the very beginning, Idesco was a pioneer in using RFID, deploying it for identification in industrial applications. Down through the years Idesco continued expanding its reputation as a pioneer provider by innovating numerous technological alternatives and multiple technologies for a variety of different application areas. Every day, Idesco devices collect data and enhance security for a variety of access control, vehicle identification, logistics and inventory control systems.
Keypads play an important role in security, so it is crucial that they are easy to use and support every application and installation environment. This is why Idesco offers a variety of keypads to suit different purposes. Idesco’s versatile keypad housing family is now adding a new member whose traditional, moving keys provide an unmistakable tactile feedback to users who need this feature when entering their pin code. Of course, Idesco continues to offer its other, well-known keypad housings with capacitive touch sensing, with readers’ electronics protected by epoxy-casting. With no moving parts, those tough (IP67) housings are the ideal solution for harsh, outdoor weather conditions, industrial and vandal-risk settings. Lastly, and common for all Idesco’s elegant keypad options is they are all EU-manufactured.
Pneumatic collection system saves more than 50% energy in waste transport Finnish cleantech company MariMatic Oy develops and delivers automatic waste collection systems for solid municipal waste using energy-saving pneumatic conveying technology. Their technology simplifies the collection and transport of community waste in residential and industrial sites. Both waste and recyclables are conveyed from collection points to central recycling facilities via underground pneumatic pipes. Their solution is hygienic, safer and much more environmentally-friendly than traditional waste collection. Conveying a ton of waste in a MetroTaifun system uses less than half the energy waste transport vehicles require. Idesco RFID readers To control access to its waste collection points, MariMatic chose Idesco RFID readers. Their IP67 protection class ensures they will reliably resist dirt, dust, a wide temperature range and inclement conditions in their exposed outdoor sites. Their highest-possible IK durability rating further assures the readers’ robust resistance to vandalism. Marimatic’s VP, Sales & Projects, Mika Koivisto, and their R&D Manager, Niclas Tylli, confirmed their satisfaction with their choice of reader. “Idesco readers and their rugged construction were a perfect fit for our waste collection system”, commented Niclas Tylli. Underground siting of waste collection makes particular sense in residential areas. Municipal waste gets transferred immediately to recycling facilities. This then reduces unpleasant odours, eliminates rodent infestations common around waste bins and improves security by lowering waste transport traffic. Access to shared waste Equipping collection points with RFID readers ensures estates’ and housing cooperatives’ control over their waste collection systems. “It benefits a housing cooperative to control access to their shared waste collection systems, since they pay for waste collection” says Mika Koivisto, MariMatic. In addition to identifying waste systems users, other benefits might be leveraged from RFID-managed waste collection. “In the future, RFID data could lead to enhanced control of waste flows, and enhanced system capacity optimisation”, Koivisto says. RFID collects accurate data of movement of persons, vehicles or commodities and reduces manual labour and errors MetroTaifun system The MetroTaifun system is an Automatic Solid Waste Collection System (AWCS) based on pneumatic conveying technology. With MetroTaifun, several waste fractions are easily collected, transported, and then sorted into separate containers, making recycling a practical reality. MetroTaifun is already employed in the city of Tampere in the Vuores area. It has also been employed in the developing areas of Vantaa and Espoo in Finland, in Vällingby Parkstad in Sweden and in Odense, Denmark. MetroTaifun projects are also ongoing in Helsinki, Finland, Sweden, Norway and China, and in Saudi-Arabia where MariMatic builds the world’s biggest vacuum conveying system. A system for collecting laundry, in addition to waste, is implemented in Malmi Hospital in Finland and in Henrik Sorensensvei care home in Norway. MariMatic supplies vacuum conveying systems also for transporting food waste in the food industry and kitchens. Idesco Oy RFID technology Idesco Oy is an expert of RFID technology with 27 years of experience. Idesco’s RFID readers and transponders, controllers and touch screen devices collect data and improve security in various identification applications around the world. RFID collects accurate data of movement of persons, vehicles or commodities and reduces manual labour and errors. One of the major application fields of RFID is automatic access control according to personal access rights. The obtained data provides diversified possibilities to use it e.g. in time and attendance management.
Why outdated access control systems are a big problemDownload
Five things to consider for AI with video technologyDownload
OSDP is the strongest access control for your businessDownload
- Matrix COSEC time-attendance and access control solutions enhance IndiaNivesh’s financial services
- Trackforce SaaS platform streamlines retail security to effectively manage physical security and loss prevention
- Security Industry Association partners with NCS4 and ISC West to provide education on stadium and public venue security
- Gallagher access control solution secures Waikato District Health Board