Senstar Wireless security

An ultrasonic emergency notification/communication system The receiver decodes the modulated ultrasonic signal emitted by the PAT transmitter An alarm contact, auxiliary contact and LED latch each time an alarm is received They remain latched when an activated transmitter is within range The latching condition is held for 5 seconds after the transmitter is deactivated Receiving range is factory adjusted for a nominal distance of 15 m (50 ft) radius, 30 m (100 ft) diameter. This can be field adjusted if required The red alarm LED assures the user that the transmitter signal has been received and the alarm message has been sent The receiver is water-resistant and may be installed outdoors Heater for colder climates In the event of an alarm activation, the event is localised to the area monitored by the reporting receiver Flush-mounted in the wall or ceiling

An ultrasonic emergency notification/communication system The receiver decodes the modulated ultrasonic signal emitted by the PAT transmitter An alarm contact, auxiliary contact and LED latch each time an alarm is received They remain latched when an activated transmitter is within range The latching condition is held for 5 seconds after the transmitter is deactivated Receiving range is factory adjusted for a nominal distance of 15 m (50 ft) radius, 30 m (100 ft) diameter. This can be field adjusted if required The red alarm LED assures the user that the transmitter signal has been received and the alarm message has been sent The receivers are water-resistant and may be installed outdoors In the event of an alarm activation, the event is localised to the area monitored by the reporting receiver Flush-mounted in the wall or ceiling

An ultrasonic emergency notification/communication system Immediately detect and locate an individual in distress Omni-directional reflective ultrasonic signal ensures reception of alarm signal Modulated ultrasonic signal results in very few false alarms Ultrasonic does not penetrate walls - alarms can be localised to a given room Push button or man-down activated Audible low-battery warning on transmitter Rugged design for reliable operation Integrates easily with security management system (1 relay per receiver) Low power transmitters for long battery life Variable range to 30 m (100 ft) diameter

An ultrasonic emergency notification/communication system Immediately detect and locate an individual in distress Omni-directional reflective ultrasonic signal ensures reception of alarm signal Modulated ultrasonic signal results in very few false alarms Ultrasonic does not penetrate walls - alarms can be localised to a given room Compact, push button or pull-ring activated Audible low-battery warning on transmitter Rugged design for reliable operation Integrates easily with security management system (1 relay per receiver) Low power transmitters for long battery life Variable range to 30 m (100 ft) diameter

An ultrasonic emergency notification/communication system Immediately detect and locate an individual in distress Omni-directional reflective ultrasonic signal ensures reception of alarm signal Modulated ultrasonic signal results in very few false alarms Ultrasonic does not penetrate walls - alarms can be localised to a given room Push button activated Audible low-battery warning on transmitter Rugged design for reliable operation Integrates easily with security management system (1 relay per receiver) Low power transmitters for long battery life Variable range to 30 m (100 ft) diameter

An ultrasonic emergency notification/communication system The receiver decodes the modulated ultrasonic signal emitted by the PAT transmitter An alarm contact, auxiliary contact and LED latch each time an alarm is received They remain latched when an activated transmitter is within range The latching condition is held for 5 seconds after the transmitter is deactivated Receiving range is factory adjusted for a nominal distance of 15 m (50 ft) radius, 30 m (100 ft) diameter. This can be field adjusted if required The red alarm LED assures the user that the transmitter signal has been received and the alarm message has been sent In the event of an alarm activation, the event is localised to the area monitored by the reporting receiver Flush-mounted in the wall or ceiling

An accelerometer-based device that detects attempts to open, cut, climb, or otherwise break through a sliding or swinging gate Analyses vibration, motion and position data Transmits intrusion and supervision alarms, power levels, RF link status, and auxiliary input state to the receiver card over the encrypted wireless link Wireless operation eliminates need to route cables from fence to moving gate panels 300 m (986 ft) transmission range (nominal, line-of-sight) from processor Secure, 128-bit encrypted RF transmissions Protects each moving gate section with only one sensor module Easily installed on chain-link, wire mesh, expanded wire mesh, and palisade-style fence gates High Probability of detection (Pd) On-board auxiliary input for monitoring gate contact Built-in solar panel

An accelerometer-based device that detects attempts to open, cut, climb, or otherwise break through a sliding or swinging gate Analyses vibration, motion and position data Transmits intrusion and supervision alarms, power levels, RF link status, and auxiliary input state to the receiver card over the encrypted wireless link Wireless operation eliminates need to route cables from fence to moving gate panels 300 m (986 ft) transmission range (nominal, line-of-sight) from processor Secure, 128-bit encrypted RF transmissions Protects each moving gate section with only one sensor module Easily installed on chain-link, wire mesh, expanded wire mesh, and palisade-style fence gates High Probability of detection (Pd) On-board auxiliary input for monitoring gate contact Internal batteries

Combines accelerometer based sensors with high performance LED lighting Detects intruders at the fence line and deters them by letting them know they have been exposed High Probability of detection (Pd) Pinpoint intrusions to the nearest luminaire Environmentally Derived Adaptive Processing Technology (EDAPT) Instant-on or strobe lighting at intrusion attempt location provides psychological deterrent to potential intruders Uniform, full-spectrum lighting (CRI value greater than 70) Focused illumination along the fence line Low power consumption (2.5W per luminaire) Wireless self-healing mesh network (2.4 GHz, 128-bit AES encrypted) eliminates need for inter-luminaire communication wiring Rugged metal mounting arms attach to most fence types and walls Designed and tested for harsh environments Interfaces with most alarm panels and Security Management Systems (SMS) Seamless integration with other Senstar perimeter intrusion detection sensors

Combines accelerometer based sensors with high performance LED lighting Detects intruders at the fence line and deters them by letting them know they have been exposed High Probability of detection (Pd) Pinpoint intrusions to the nearest luminaire Environmentally Derived Adaptive Processing Technology (EDAPT) Instant-on or strobe lighting at intrusion attempt location provides psychological deterrent to potential intruders Uniform, full-spectrum lighting (CRI value greater than 70) Focused illumination along the fence line Low power consumption (2.5W per luminaire) Wireless self-healing mesh network (2.4 GHz, 128-bit AES encrypted) eliminates need for inter-luminaire communication wiring Rugged metal mounting arms attach to most fence types and walls Designed and tested for harsh environments Interfaces with most alarm panels and Security Management Systems (SMS) Seamless integration with other Senstar perimeter intrusion detection sensors

Combines accelerometer based sensors with high performance LED lighting Detects intruders at the fence line and deters them by letting them know they have been exposed High Probability of detection (Pd) Pinpoint intrusions to the nearest luminaire Environmentally Derived Adaptive Processing Technology (EDAPT) Instant-on or strobe lighting at intrusion attempt location provides psychological deterrent to potential intruders Uniform, full-spectrum lighting (CRI value greater than 70) Focused illumination along the fence line Low power consumption (2.5W per luminaire) Wireless self-healing mesh network (2.4 GHz, 128-bit AES encrypted) eliminates need for inter-luminaire communication wiring Rugged metal mounting arms attach to most fence types and walls Designed and tested for harsh environments Interfaces with most alarm panels and Security Management Systems (SMS) Seamless integration with other Senstar perimeter intrusion detection sensors

Consists of a transmitter (Tx) and receiver (Rx) which create an invisible detection zone that alerts when an intrusion occurs Zone lengths from 5 to 200 m (16 to 656 ft); stackable for increased detection zone height High Probability of detection (Pd) Low Nuisance Alarm Rate (NAR) Discriminates valid targets from environment effects Stable operation over temperature and equipment aging Automatic Gain Control (AGC) automatically adjusts to varying path loss due to Tx-Rx separation, surrounding conditions and weather PLL-controlled VCO provides ultra-stable operating frequency Up to 10 operating channels for more interchannel isolation and installation flexibility Transmitter modulation used for Tx-Rx communications – Tx-Rx communications link provides full transmitter supervision and health status with no data wiring to transmitter Two output relays for local, non-networked operation Silver Network™ compatibility allows shared network wiring with OmniTrax®, FlexZone®, and XField® sensors Remote diagnostics over sensor network Easy to configure via Universal Configuration Module (UCM) software Designed and manufactured for harsh outdoor environments

Provides 32 output points Source voltage for outputs provided externally Up to 48 VDC, 100 mA maximum ‘on’ current 4 source voltage connections, each routed to 8 open-collector high-side contacts Configurable activation type (latching, flash mode, pulse) and timing (0.125 to 10 seconds)

Provides additional 32 input points Input activation: NO or NC Supervision types (none, single, double) and resistor values Required input activation time Noise tolerance and line drop allowance Two LEDs per input: alarm, supervision Full lightning protection: trazorbs and gas discharge devices on each input

Provides additional 32 relay output points Form-C, 1A, 30 VAC/DC non-inductive load Configurable activation type (latching, flash mode, pulse) and timing (0.125 to 10 seconds) LED indicator for each relay

Senstar F4KT0200 zone kit includes one Start Module and one End Module for installation in field splice enclosures.

19 inch rack-mount swing-out mounting plate with 35 mm DIN-rail front and back Each DIN-rail can host 2 UltraLink modules with approximately 3 inch (7.62 cm) of rail-space for other components (e.g. power supplies and/or network interface devices) Cover plate provides mechanical protection

Hosts one Gen2 Silver Network communications card (EIA-422, multi or single-mode fiber optic, or Ethernet) 8 relay output points 8 dry-contact input points Supports up to 8 expansion modules Manages up to 272 total I/O points Configurable via Silver Network™ connection or USB Comm/power fail relay Supplies power to expansion modules DIN-rail mount, 35 mm (1.38 in) “top hat” section Swing out DIN-rail with protective cover for 19 in rack Rated for indoor and outdoor use