CEM Systems Security management

CEM RDR/615/201 fingerprint validation card reader is used to enroll cardholders and capture their fingerprint templates onto the AC2000 system. It enables both the validation of the card and the verification of a cardholders biometric fingerprint template.

CEM DCM/350/005 is a two door intelligent encrypted IP controller designed to interface to CEM sPass DESFire smart card readers. It has an on-board 10/100 Ethernet connection and communicates directly with the AC2000 server.

CEM RDR/280/105 is a validation card reader that are used to capture card numbers so that personnel can be associated with an ID card on the CEM AC2000 security management system. The card definitions and formats are easily configured locally using integrated keypad.

CEM RDR/280/109 is a validation card reader that are used to capture card numbers so that personnel can be associated with an ID card on the CEM AC2000 security management system. The card definitions and formats are easily configured locally using integrated keypad.

CEM RDR/280/101 is a HID proximity card reader that are used to capture card numbers so that personnel can be associated with an ID card on the CEM AC2000 security management system. The card definitions and formats are easily configured locally using integrated keypad.

CEM RDR/611/117 is a DESFire card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/105 is a MiFare card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

Support for a full two door set and four readers (Full 2 door IN/OUT access control) Supports Open Supervised Device Protocol Version 2 (OSDPv2) Secure TLS v1.2 communications to host server Secure Element on Board for Secure Key Storage, Update and Boot High performance deterministic door control process IPv4 10/100 Mbps Ethernet Host Connection Dedicated Fire Input Future support for IEEE 802.1x network authentication High performance future-proof CPU For use with AC2000 Security Management System Offers optional High-Power over Ethernet connectivity - to power two fully resilient door sets  *Compatible with an IEEE 802.3bt Type 4 (90 W) PoE++ Midspan* for high-power applications

CEM RDR/611/115 is a MiFare card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/101 is a card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/111 is a HID Prox card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/114 is a Prox & MiFare card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM S3030 Portable Reader has an occupancy feature which allows a cardholder head count to be performed in a defined area preventing card sharing. It can also be used for mustering situations and always contains the current system muster state.

CEM RDR/611/104 is a proximity and MiFare card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/108 is a HID iClass card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/610/114 is a Prox & Mifare card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/611/116 is a PicoPass card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/118 is a HID iClass card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/610/117 is a DESFire card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

Utilises highly secure 13.56MHz MiFare DESFire smart card technology Fully ISO / IEC 14443 A 1-4 compliant Pre-personalised card memory allowing for usage in other systems such as cashless vending Advanced Encryption Standard (AES) -128-bit or Triple DES (3DES) encryption between the card and the reader Meets ISO standards for thickness for use with all direct image and thermal transfer printers Add a magnetic stripe, barcode, anticounterfeiting, or photo ID to the card Compatible with the CEM sPass reader, S700 reader range, and the emerald touch screen reader range

Utilises highly secure 13.56MHz MiFare DESFire smart card technology Fully ISO / IEC 14443 A 1-4 compliant Pre-personalised card memory allowing for usage in other systems such as cashless vending Advanced Encryption Standard (AES) -128-bit or Triple DES (3DES) encryption between the card and the reader Meets ISO standards for thickness for use with all direct image and thermal transfer printers Add a magnetic stripe, barcode, anticounterfeiting, or photo ID to the card Compatible with the CEM sPass reader, S700 reader range, and the emerald touch screen reader range

CEM DCM/330/101 is a two-door controller designed to interface third-party read heads with the CEM range of access control systems. It also combines Power over Ethernet Plus (PoE+) connectivity, which powers door furniture and two heavy duty maglocks via a single CAT 5e/6 network cable. Feature includes: Intelligent two door controller supporting 3rd party read heads Support for two doors Onboard 10/100Mbps PoE+ Ethernet connectivity to power door equipment via a single CAT5e/6 cable - no local mains required Communicates directly with the central AC2000 access control system Database supports 200,000 cardholder records for off-line card validation

CEM RDR/611/107 is a DESFire card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/610/104 Prox & Mifare card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/610/118 HID iClass card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/615/101 HID Prox card reader is fully integrated biometric and access control reader. It controls access to restricted areas where an additional biometric layer of security is required. It's structured database allows storage of large amounts of cardholder records for off-line card validation.

CEM RDR/611/106 is a PicoPass card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/610/101 is a HID Prox card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.