Access control systems & kits - Expert commentary

‘We want to become better known for access control’ - Q&A with Bosch Building Technologies’ Gregor Schlechtriem
‘We want to become better known for access control’ - Q&A with Bosch Building Technologies’ Gregor Schlechtriem

Gregor Schlechtriem has worked in the access control market for over 20 years and is now responsible for the Access & Intrusion Business Unit at Bosch Building Technologies. In this interview, the expert talks about key industry trends, the impact of the COVID-19 (Coronavirus) pandemic, technical innovations and his company’s strategy. Mr. Schlechtriem, you have many years of experience in the security technology market. What is your background and what are your responsibilities as Senior Vice President at Bosch Building Technologies? Gregor Schlechtriem: I am a trained engineer and electrical technician, and have been involved with access control in the broadest sense, since I started my career in the late 1980s. I started in the field of parking garage technology and then switched to security technology in 2001, as Managing Director of micos GmbH, which specialised in traditional access control. micos GmbH was known for its highly available and highly secure access control systems, for critical infrastructure and government applications. Many systems from that time are still in use today and continue to be supported and upgraded. Bosch is continuing micos’ business here? Gregor Schlechtriem: Exactly, micos was taken over in 2004 by Bosch Security Systems, now known as Bosch Building Technologies. Since then, we have continuously been developing the access control business. Being part of the Bosch Building Technologies division, we benefit a lot from international cooperation with colleagues Being part of the Bosch Building Technologies division, we benefit a lot from international cooperation with colleagues and from overlap with other product lines, such as intrusion detection technology and video security. This gives us the opportunity to implement outstanding project solutions for demanding customers in an international environment. In developing this business, I rely on my experience from other interesting roles at Bosch that I took on, after micos was bought in 2004. For a time, I worked in the European System Integrator Business, which I also had the privilege of managing for several years, as well as being directly responsible for business units. In Fairport, USA, I had the overall responsibility for intrusion detection technology for many years, as I later did in Eindhoven for video systems. Since 2018, the global access control and intrusion detection business has once again been my direct responsibility. At Bosch Building Technologies, we have in the meantime assigned sales to the respective business units, so that we can develop our product and solution portfolio, in close cooperation with sales and our regular customers. Our main task now is to make our access control portfolio accessible to a broader market. We want to make Bosch much better known, as an access control provider, in the international market. After all, with our own access product portfolio, the power of the Bosch Group and over 40 years of experience in this sector, we have a lot to offer. As an expert in access control, how do you see the industry developing? In which direction is it currently evolving? Gregor Schlechtriem: First of all, I see that security requirements are constantly increasing. Whereas there are currently still simple ‘key replacement systems’ that merely record card numbers, such an approach, to a large extent, no longer meets today’s security and user experience requirements.The core task of access control has not changed over the years In the beginning, access control was more or less a kind of key replacement. Later, there was the possibility of increasing security via a pin code, i.e., via verification through simple data inputs. The next step in this direction was biometrics, which is another key step up, because it allows verification by means of unmistakable characteristics. However, the core task of access control has not changed over all the years and has basically always remained the same: access control means determining who has an access request and checking whether this request can be fulfilled. What’s next on this path to greater security? Gregor Schlechtriem: Biometrics-based access control is becoming increasingly powerful and user-friendly through the use of artificial intelligence (AI). Here, data protection plays a major role, as wherever identities are established and movement data is recorded, it is necessary to reconcile the evolving technology with data protection.Biometrics-based access control is becoming increasingly powerful and user-friendly through the use of artificial intelligence The question of data protection is becoming even more significant, as systems increasingly migrate to the Cloud. Bosch puts particular emphasis on ensuring that, even in the cloud, the data generated in access control is always in line with data protection rules, regardless of where it is located. In my opinion, this trend towards the Cloud will continue, because companies are increasingly looking for complete service offerings, so that they can focus on their core business. Also, a system in the Cloud is easier to maintain and always up-to-date with the latest software, which makes cloud solutions even more attractive for providers and users. How can higher security be reconciled with a good user experience? Gregor Schlechtriem: Today, the card still plays a central role in the user experience, as the essential credential. Another current trend is ‘one card for everything’: with the increasing availability of secure multi-function smart cards, the possibility arises to use cards beyond the pure access function, for example, for payment in the canteen, at the catering and coffee machines, and in the parking garage, as well as simple access to other properties and so on.The security of cards has evolved significantly and kept pace with requirements The security of the cards, the reading and encryption processes, has evolved significantly and kept pace with requirements, although we are also facing an installed base that no longer meets these requirements, due to outdated systems. Today, it is standard for communications between reader and card to be encrypted. In some cases, the keys are also only held centrally to further increase security. The security systems industry was also affected by the COVID-19 (Coronavirus) pandemic. How do you think the industry has changed? What technical solutions have emerged during this time? Gregor Schlechtriem: First of all, there is a certain need for retrofitting in the industry due to changes in how buildings are used. For example, American retailers used to be open around the clock and always had staff on site. Now, due to COVID-19, stores are also closed, and this results in a whole new need for intrusion detection and access control systems to protect the buildings. For access control, an obvious task has arisen as a result of the COVID-19 pandemic, namely to track contacts, as far as this is compatible with data protection. We actually expected more to happen here, but in our observation, many companies did quite little, despite clear and simple steps that could have been implemented relatively quickly. The installed access control systems clearly lag behind the technical possibilities. Another topic that the COVID-19 pandemic has brought into focus is hygiene Another topic that the COVID-19 pandemic has brought into focus is hygiene. Companies should actually have invested in contactless systems here and retrofitted speed gates or motorised doors. But in many cases this was not put into practice. The door opener is still often used, which has to be operated manually and therefore, is touched multiple times. But, if everyone presses the same button, that doesn't help hygiene. Surprisingly, this is different in North America. Here, ‘request-to-exit’ proximity detectors are used almost everywhere, which avoids this problem completely and releases the door, when an authorised person approaches it. Mobile access and smartphone-based access control are also growing markets. What kind of developments do you see in these areas? Gregor Schlechtriem: I already mentioned that users increasingly want to be able to use one card for several applications. But, what we are seeing here is that even with the most modern cards, which have a lot of applications loaded on them, we are reaching performance limits and the user experience suffers. If you compare the card with the smartphone as a credential, you have a much more attractive integration platform there, which is significantly faster and delivers much better performance. For us, the mobile credential or the smartphone is the future, because it simply offers more possibilities that the card will not be able to provide in the long term. What is the specific direction Bosch is taking here? Gregor Schlechtriem: We are currently working on a broad implementation. A whole team is working on the user experience around the smartphone, because it’s understood that smartphone-based access has to work just as easily, as it currently does with a card.A whole team is working on the user experience around the smartphone In theory it does, but if you look at some of the actual implementations, this topic is still relatively complex. In terms of user experience and automation, we still have quite a way to go, and we are working hard on that at the moment. The user experience is one side of the coin, the other side concerns establishing security in the smartphone as a whole. In other words: How do I make the smartphone secure enough as a mobile credential, to meet my access control requirements? We are also working intensively on this. That's actually an IT task. Do you do this yourself at Bosch or do you work with external experts here? Gregor Schlechtriem: We have our own powerful Bosch IT, which also manages our company smartphones. If our company smartphones are lost, the data on them is automatically deleted. The devices use biometrics to identify users, before they can access the data. It is a sound security concept that a card cannot offer. Moreover, we are working with other partners in the IDunion project, to create the additional infrastructure around mobile credentials as well. What exactly is the IDunion and what role does Bosch play? Gregor Schlechtriem: Digital identities must be openly accessible, widely usable, interoperable, and secure. This applies not only to access control, but to the digitised economy in general. The IDunion project has set itself the task of creating the infrastructure for this, in the form of an independent wallet, i.e., secure identity storage on smart devices. The project is funded by the German Federal Ministry for Economic Affairs and Energy (BMWI), because digitisation is also a critical social issue. We are intensively involved in the ‘Physical access to the building’ work package in this consortium. Through this involvement, we want to ensure that our access control systems benefit from this infrastructure and are open to future digital business models. Does ‘digital identity management’, which includes biometrics and mobile access, also play a role for Bosch? Yes, it plays an important role for us, and I wouldn’t consider these topics separate Gregor Schlechtriem: Yes, it plays an important role for us, and I wouldn’t consider these topics separate. For me, a mobile device has the advantage that it has already ensured and verified my identity from the moment of interaction. That’s the fascinating thing about it. If I only allow the device to communicate with the access control system, if I have identified myself first, I have implemented biometrics and access control together in a widely accepted process. From my point of view, this is a very interesting perspective, in terms of security and user experience, because the biometrics procedures in smartphones are, I think, the best currently available. In my view, the smartphone has the potential to take over central functions in access control in the future. What are your goals for the access control business of Bosch Building Technologies in the near future? Gregor Schlechtriem: We will continue to focus on specific solutions for large customers. That is the continuation of our current strategy. In these projects, we will introduce new topics as I have just described, i.e., primarily new technology elements. I believe that, precisely because of the longevity of access control, a long-term migration capability is also of particular importance. We want to reach out to the broader market and make more widely available, what we have developed in terms of technology and innovation. We are currently in the process of setting up and optimising our sales organisation, so that it becomes much more widely known that we at Bosch have our own powerful access control portfolio, which can be used for all kinds of applications. In addition, we want to differentiate ourselves in the market with our systems, in line with the motto of our founder, Robert Bosch: ‘Technology for life’. The user experience with Mobile Access should be simple, straightforward, and secure: You hold your smartphone in front of the reader and the door opens.

Protect physical assets from cyber-attacks
Protect physical assets from cyber-attacks

Recent cyber-attacks have disabled and even shut down physical assets. Robust foundational security and training staff, able to recognise an attack can help mitigate the threat, as ABB’s Rob Putman explains. Edge devices and data analytics As cyber security specialists, we must navigate an ever-changing threat landscape, one that is made even more complex by the increased interconnectivity between Operational Technology (OT) and Information Technology (IT), as companies look to leverage edge devices and data analytics, as well as remote connectivity, in the wake of the COVID-19 pandemic. As the threat surface evolves, the industry must guard against attacks on key physical infrastructure, carried out by a range of malicious actors, including nation states and criminals intent on blackmail. The chemicals sector, a high-value target for cyber-criminals Cyber-criminals view the chemicals sector, as a high-value target, because of the potential cost In 2017, not long after a ransomware attack that targeted Maersk, the world’s largest shipping firm, made the news around the world. Another cyber-attack, this time targeting physical industrial assets, generated fewer headlines, and yet could have resulted in both real, as well as financial, damage. Cyber-criminals view the chemicals sector, as a high-value target, because of the potential cost, both financial and reputational, to the operator, should production be interrupted or stopped entirely. Cyber security vulnerabilities put physical assets at risk The attack in question, a ‘Triton’ custom malware attack on a petro-chemical facility in Saudi Arabia, targeted a safety system, taking over system controllers. Bugs in the code triggered an emergency shutdown, but could have led to the release of toxic and explosive gases. It was a vivid reminder of how cyber security vulnerabilities are increasingly putting companies’ key physical assets at risk. Two more-recent high-profile incidents illustrate my point. In February, a Florida water treatment plant was hacked. The malicious actor remotely accessed the system for three to five minutes, during which time they opened various functions on the screen, including one that controls the amount of sodium hydroxide (NaOH) in the water. The hacker changed the NaOH from about 100 parts per million to 11,100 parts per million, which could have resulted in a mass poisoning event. Colonial Pipeline cyber-attack incident Then, in May, the Colonial Pipeline system that originates in Houston, Texas and carries gasoline, and jet fuel, suffered a ransomware attack. Using a VPN, hackers targeted back-office IT systems, forcing Colonial to shut down IT hosts and network infrastructure, severing communication with those OT systems that are responsible for communicating ‘transactional data’ associated with fuel delivery. In this instance, a single compromised password disrupted Colonial’s ability to invoice its customers. This dependency on OT data stopped pipeline and business operations, and the company was elected to pay the hackers an initial ransom of US$ 4.4 million, in order to restore operations. The Colonial attack was multi-dimensional, in that it not only impacted Colonial’s business, but also the wider US economy and national security, since the pipeline transports nearly half of the east coast's fuel supplies. Outdated IT system elevates physical risk The increased interconnectivity between IT and OT can also create vulnerabilit Attacks such as these prove that, armed with little more than a laptop, an email account and access to the dark web, determined hackers can cause disproportionate damage to physical infrastructure. As mentioned at the outset, the increased interconnectivity between IT and OT can also create vulnerability. Producers often want to know: Is it risky to connect a production asset or their operational environment to the Cloud? My answer is, if you do so without having done any risk audits around people, processes and technology, or without enhancing and maintaining that environment, then yes, that is risky. For example, we often observe that the life cycle of a production asset far outlasts the IT systems that are used to run it. Take a cement kiln. Several generations of plant operators may have come and gone, but that asset may still run, using legacy software, such as Windows XP and why not? Need to replace aging distributed control systems Well, that’s fine, if you are not concerned about having that asset compromised, and all that entails. A ‘flat’ IT network, an aging distributed control system, and machines with legacy versions of Microsoft Windows, all these elements, which are still commonplace in many industries, make it much easier for attackers to find and infiltrate a company, without needing sophisticated tools. The age-old mantra of not interfering with a piece of equipment or software that appears to be working, often applies to the individual assets. For example that cement kiln that are still controlled by the same Windows XP-based control software. However, if we’re honest, things have changed quite a bit, not because something was broken, but because innovation came in. That same kiln control system is most likely connected to other systems, than when first commissioned and that opens it to exposure to threats that it was never designed for. The human element There is a misconception that IoT-connected devices can open companies to risk There is a misconception that IoT-connected devices can open companies to risk, but many recent, high-profile cyber-attacks have been conducted from a laptop, by hacking someone’s VPN, or are a simple phishing/malware attack. In all these cases, the human element is partly to blame. Take the Florida attack. The compromised computer at the water treatment facility was reportedly running an outdated Windows 7 operating system and staff all used the same password, in order to gain remote access via the Teamviewer app, which the hacker was then able to use. Physical and human assets, key to robust cyber security Discussion on the best way to mitigate the threat is often framed solely around specific technical solutions and ignores the fact that robust foundational cyber security is really driven by two very different, but equally important, types of capital: physical assets (e.g. production machinery), and human assets. The truth is that smart digital software and industry-renowned cyber security applications, while critical, are in many cases, only as good as the weakest human link in the chain. Industry would, therefore, do well to ask itself the following question: Do we have a security problem, or a complacency problem? At this juncture, it is important to point out that the majority of companies that ABB works with, are at least aware of the threat posed by cyber attackers, and the potential impact of an attack, on their revenues, reputation and bottom line. User error and human-generated exposures Making sure staff are aware of the threat and training them to respond properly, if they are targeted, is vital However, user error and human-generated exposures are where most of these attacks occur. Those human failures are mostly not due to malicious intent from employees, but to the lack of training of the employees on secure behavior. Making sure staff are aware of the threat and training them to respond properly, if they are targeted, is vital. However, there are also age demographics at play here. Much of the operations employee base is heading towards retirement and often, there is no plan or ability to backfill these people. Need to invest in new digital and automated technologies If you think you don't have enough people now, in order to stay on top of basic care and feeding of the OT environment, with regards to security, what is that going to be like in 20 years? For this reason, there must be a major industry reset, when it comes to its workforce. Companies must invest in new digital and automated technologies, not only to ensure that they stay ahead of the curve and mitigate risk, but also to attract the next generation of digitally literate talent. Robust cyber security is built on solid foundations When we talk about foundational cyber security, we mean fundamentals, such as patching, malware protection, high-fidelity system backups, an up-to-date anti-virus system, and other options, such as application allow-listing and asset inventory. These basic controls can help companies understand their system setup and the potential threats, identify vulnerabilities, and assess their risk exposure. The Pareto principle states that around 80% of consequences come from 20% of the causes. In the context of cyber security, that means 80% of exposure to risk comes from 20% of the lack of security. If companies do the foundational things right, they can manage out a significant amount of this risk. Importance of maintaining and upgrading security controls However, having basic security controls, such as anti-virus software in place, is just the first step on that journey. Equally important is having someone within the organisation, with the requisite skill set, or the extra labour bandwidth, to operate, maintain and update those security controls, as they evolve. Educating, training and recruiting existing employees, and the next generation of talent, along with forging partnerships with trusted technology providers, will ensure that industry can leverage the latest digital technologies, in order to drive business value, and secure physical assets against cyber-attacks.

The robotic transformation of the security industry
The robotic transformation of the security industry

The COVID-19 pandemic is only accelerating the expansion of Automation, Robotics, Machine Learning (ML) and Artificial Intelligence (AI), and changing how people live their daily lives. This expansion leads the way with technologies that are developed to solve problems, improve operations, streamline processes and assist people, to focus on learning new skills, creativity, and imagination. Transformation of the physical security industry One of the latest industries to be permanently transformed is physical security. The era of utilising security cameras is slowly changing into more advanced and more efficient technological applications - security robotic solutions. SMP Robotics is a California-based company, which is a pioneer in developing robotic technologies, powered by AI, to assist, improve and deliver on new expectations in today’s world. One of their services is smart surveillance systems. This represents a proactive approach to security. The company, SMP Robotics’ Founder and Chief Executive Officer (CEO), Leo Ryzhenko, stated “Autonomous robotic technologies will become a driving force in future security solutions.” Robotics and AI in autonomous security solutions The robots can patrol 24/7, counteracting intrusion and communicating via voice message with guards The company uses robotics and AI technology to implement autonomous security solutions, which reduce liability and overhead, as well as improving the quality of services. Robotic guards are capable of patrolling all types of facilities, in both urban and rural contexts. The robots can patrol 24/7, counteracting intrusion and communicating via voice message with guards. The inspection robots, deployed by SMP Robotics, are easily integrated with many existing security technologies, armed with obstacle avoidance and anti-collision measures, automatically recharge, and can recognise faces up to 50 metres. As the world grows increasingly complex, technology like this is essential to ensure safety for all. AI-enabled autonomous video monitoring ground vehicles The advancements in technological breakthroughs of SMP Robotics position the company and its AI-powered, autonomous video monitoring ground vehicles, to be the most adaptable to any industry, cost-effective for clients’ business needs, in providing various types of services from public safety, crime prevention, to asset protection and physical security. SMP Robotics continues to implement new innovative solutions and groundbreaking technologies in its latest generation of autonomous models. Currently, many were already deployed or in a process to be delivered to a number of key clients, in various industries throughout the globe, from oil & gas, nuclear power plants to data centers, healthcare facilities, and amusement parks. Smart security robots Tal Turner, the Vice President (VP) of Business Development and Partnerships, SMP Robotics, said “We provide autonomous, artificial intelligence, all-weather, all-surface, smart security robots that are turnkey and operate independently on their own, using real-time obstacle avoidance, face recognition, and other cutting-edge technological advancements.” According to Coherent Market Insights, the Robots as a Service (RaaS) market direction will grow by 15.9% by 2028 and reach the threshold of 41.3 billion dollars. SMP Robotics stands at the forefront of the security robotic revolution, making an impactful change to make the world a safer place.

Latest CEM Systems Ltd news

Johnson Controls deploys its integrated security solution to safeguard Otopeni Henri Airport – Bucharest Nord Railway Link
Johnson Controls deploys its integrated security solution to safeguard Otopeni Henri Airport – Bucharest Nord Railway Link

Compania Naţională de Căi Ferate ‘CFR’ - SA, the state railway carrier of Romania, has invested in an integrated security and safety solution from Johnson Controls, to protect passengers travelling on a new railway link, connecting the Otopeni Henri Coandă International Airport to Bucharest Nord main railway station, in Bucharest, Romania. Securing Bucharest’s new rail link The 2.95 km rail link, which was planned to facilitate the large number of fans travelling from the international airport to attend the Bucharest-hosted EURO 2020 football matches and was completed in just 14 months, from the design stage, at a cost of approximately 120 million Euros, is now being increasingly used by business travellers and tourists, who wish to visit the city of Bucharest. The contract to design and execute the entire project was won, as part of a competitiveness tender process, by the Arcada – ISPCF – DB Engineering consortium. Alfred Net, a systems integrator that specialises in designing and implementing turnkey security, telecommunications and network solutions, was subsequently tasked to provide the new railway terminal’s safety and security systems, as well as the passenger communications and information systems. Need for a sophisticated security solution We were very pleased to have the opportunity to use our experience of providing sophisticated solutions" “We were very pleased to have the opportunity to use our experience of providing sophisticated solutions for complex and mission critical applications, in order to contribute to the success of this important project,” said Alex Vladutoiu, the Managing Director & Solutions Architect at Alfred Net. Alex Vladutoiu said, “With the new link terminating within the airport, we immediately realised that any security and safety solution that we recommended to the consortium would need to meet the demanding requirements of airport security, as well as railway- related EU regulations and directives.” Deep integration of security components He adds, “This meant that as well as being robust, ultra-reliable and cyber secure, the various component parts of the solution would need to be deeply integrated with each other, so as to provide control room operators with a high level of situational awareness, which would enable them to react quickly and effectively to any incidents.” Alex Vladutoiu further said, “With this in mind, our previous experience led us to recommend that all the security and safety products should be single sourced from the Johnson Controls’ access control, fire, intrusion and video surveillance brands, which come under its Tyco umbrella. Simply put, we knew these various brands could collectively provide us with everything needed to put together an effective solution for this project.” He adds, “Importantly, we were confident that the various products, which to a large extent are ‘plug & play’, could be easily integrated without the time-consuming process of developing new drivers and interfaces.” Tyco victor security management platform The Alfred Net design team specified the Tyco victor security management platform  The Alfred Net design team specified the Tyco victor security management platform, to be at the heart of the safety and security solution. In addition to helping control room operators manage and monitor the images, captured by Tyco Illustra high-definition IP network cameras, victor’s graphical user interface (GUI) alerts operators in real time, as to any fire or intrusion events, as well as any access control activity. The design of the security and safety solution was based on a rigorous Risk Assessment Report, which took into account the worst case scenarios, in terms of the threat to the safety of passengers, disruption and the protection of assets. Unified security solution “By providing a unified solution, which can manage the combined data captured by the intrusion detection, access control, fire detection and video surveillance systems, victor offers authorised users with all the information they need, to monitor and strictly control the movement of passengers.” The products include: Video Surveillance & AI Analytics: In addition to the Tyco Illustra cameras and VideoEdge video recorders, which have been deployed to monitor the railway terminal proximity, mission critical machinery, platforms and areas open to the public, control room operators are also able to take advantage of video analytics, in order to help them quickly detect any suspicious activity or danger. Tripwire detection, for example, can generate an alert, if a passenger oversteps a platform’s safety line, while people counting analytics can alert security personnel to overcrowding. It can also be used by operations personnel to help them make best use of human resources, by having a greater understanding of which parts of the station are busy, at different times of the day. Access Control: A CEM Systems AC2000 access control software platform, together with eDCM350 OSDP protocol IP door controllers, are supporting smart card readers and encrypted cards, to limit access to sensitive areas throughout the railway station, such as communications, signalling, staff and locker rooms. As a highly scalable solution, AC2000 enabled Alfred Net to implement access control throughout expansive areas of the railway. By utilising RS485 serial communications with strong AES 128 encryption between the eDCM 350 intelligent door controllers, the OSDP readers and the smart cards, the railways is protected against the threat of controller signal cloning, as well as the threat of personnel card cloning. Fire Detection: Zettler Profile Flexible addressable panels, flame detectors and smoke sensors have been installed throughout the station terminal, to ensure mandatory compliance with EU fire regulations. Integration with the station’s PAVA system means that pre-recorded announcements are automatically broadcast, when a fire-related event occurs. Intrusion Detection: A DSC PowerSeries Neo intrusion system is providing protection for areas, which may be left unattended, such as cash handling areas, with integrated panic buttons to ensure there is a rapid reaction to any intrusion alarm. Johnson Controls and Alfred Net partnership Alfred Net worked closely with the Johnson Controls’ pre-sales team, in order to ensure the best products were specified for each location and application, and the comprehensive security and safety solution was installed, alongside the station’s iPIS communications and information software. Alex Vladutoiu said, “This was without doubt the most complex project that the client has been involved with and reflects its determination to invest in the latest technology, to ensure maximum operational efficiency and to protect its passengers and assets.” Video analytics and flame detection This has resulted in diverse solutions, such as video analytics and flame detection" He adds, “This has resulted in diverse solutions, such as video analytics and flame detection, based on video technology interacting with laser detection, RGB LED displays, digital signage, Text-to-Speech and many other state-of-the-art technologies, to deliver a highly effective total solution.” Since December 2020, when the new rail link became operational, the highly complex and integrated security and safety solution from Johnson Controls has been playing a key role, in ensuring the smooth operation of the train station and the running of 72 trains per day, (36 pairs), which arrive and depart every 20 minutes, both from and to the airport. Tyco suite of security products Alex Vladutoiu, Managing Director and Solutions Architect at Alfred Net, concludes “As a solution architect, Tyco is indeed my preferred security provider for integrated projects. As a unified solution, the Tyco suite of products are almost ‘plug and play’ and give you everything you need to build-up an integrated system, without spending additional time or money on developing other interfaces. He concludes, “We were delighted to have designed and implemented the new Otopeni Airport Railway Terminal project in less than one year and we look forward to our continued partnership with Tyco.”

Johnson Controls launches CEM Systems AC2000 v10.2 security management system with enhanced Time & Attendance app
Johnson Controls launches CEM Systems AC2000 v10.2 security management system with enhanced Time & Attendance app

Johnson Controls has announced  the release of CEM Systems AC2000 v10.2, which offers new features such as an enhanced Time & Attendance application, improved Pass Design, advanced room booking with access control and additional features that increase the performance and scope of the access control system suite. AC2000 v10.2 Time Hub CEM Systems’ AC2000 Time Hub is an enhanced Time & Attendance workstation client and web application CEM Systems’ AC2000 Time Hub is an enhanced Time & Attendance workstation client and web application. It helps AC2000 customer maximise their existing security infrastructure by going beyond access control, without the need for an additional Time & Attendance system. AC2000 Time Hub utilises the existing AC2000 system to provide reliable timekeeping, an improved user experience and helps to avoid costly payroll errors, under or overstaffing and inefficient time recording.  Integrated into the AC2000 system, Time Hub is a reporting method for the office manager/administrator who requires statistics on the entering and exiting of staff. The improved Pass Design application is another feature of AC2000 v10.2 that provides a more intuitive user interface, more control of badge designs and features which reduce the configuration time for passes. Security management system The Advanced Room Booking feature in AC2000 v10.2 improves resource management, ensuring that only the meeting organiser and invitees can access a meeting room, booked via Outlook, at the time required. The AC2000 Security Hub command and control application has been enhanced with enterprise map support, a new dashboard to display system metrics and a new Rooms tab for improved operational resource management. Building on the range of video, perimeter detection and lift interface integrations, AC2000 now offers new interfaces to Samsung CCTV, Southwest Microwave perimeter detection and KONE Destination.

Johnson Controls announces opening of new Dublin showroom and training facility in Ireland
Johnson Controls announces opening of new Dublin showroom and training facility in Ireland

Tyco, the security products division of Johnson Controls, has announced the opening of its new state-of-the-art interactive showroom and training facility in Ireland. ACVS solutions Located in the Ballymount area of Dublin, the new showroom facility provides the opportunity for system integrators and their end-user clients to see live demonstrations of the innovative features and groundbreaking technology built-into the latest generation of Access Control and Video Surveillance (ACVS) solutions supplied under the Tyco umbrella. “In addition to in-depth demonstrations of specific products or software, we are now also able to show how easy it is for users to benefit from a totally integrated security solution via an interactive operational system,” said Colm O’Brien, Tyco’s ACVS Business Manager in Ireland. Unified video management He adds, “As an example, we are able to demonstrate the full capabilities of victor, our Unified Video Management application, which seamlessly synchronises video surveillance with access control, fire, BMS, Drone Detection and mitigation, Radar, Gate Automation, intrusion and other systems, into one powerful, intuitive interface.” The new facility also has a fully equipped training room with hands-on workstations to enable system integrators to learn how to offer their end-user clients maximum value from a wide range of solutions, including American Dynamics Victor & VideoEdge Video platforms, Exacq Video Management Software, Illustra cameras, Software House CCure Access Control, CEM Access Control Systems and Kantech Access Control platforms.

Related white papers

10 top insights in access, cloud and more

Protecting dormitory residents and assets

Top 5 ways to ensure visitor safety and security