Pelco DX2008-480 Digital video recorder (DVR)

Technical Specification

Please note: this is a discontinued product.

Go to Replacement product

Features:

Make: Pelco
Model code: DX2008-480
Series: DX2000 Series
Channels: 8 channels
Recording Mode: Timelapse / Event recording

Additional info:

The DX2000 Series DVR can record video based on scheduled settings in continuous, motion detection, or alarm modes. It can also be connected to a maximum of 16 serial devices such as cash registers or ATMs for recording data along with the video. Since most applications do not require local, labor-intensive supervision, the DX2000 Series DVR was engineered for complete remote operation utilizing TCP/IP network (LAN/WAN/Internet) or PSTN phone line connections. The system is operated or programmed (depending on password level) through the Web browser interface installed on your PC. The PC can be positioned in close proximity to the DX2000 or located halfway around the world.

Contact manufacturer Contact manufacturer

Datasheet Datasheet

Make	Pelco
Manufacturer	Pelco, Inc
Category	CCTV>Digital video recorders (DVRs)
Model code	DX2008-480
Channels	8 channels
Recording Mode	Timelapse / Event recording
Monitor Outputs	1
Inbuilt Multiplexer	Yes
Multiplexer Type	Duplex
Storage Capacity GB	480 GB storage
Image per second (IPS)	16 fps storage rate
Compression Type	Wavelet
Resolution	720 x 240 resolution
Signal Mode	PAL / NTSC
Recording System	HDD
Mount type	8 in, 1 out
Network Type	TCP/IP, PSTN
IP Ready	PTZ
Physical Specifications	Dimensions mm: 140 x 483 x 498 Weight kg: 13.4 kg
Electrical Specifications	Power Consumption: 200
Environmental Specifications	Operating Temp ^oC: 5 ~ 40 Operating Humidity %: 80%
Additional info	The DX2000 Series DVR can record video based on scheduled settings in continuous, motion detection, or alarm modes. It can also be connected to a maximum of 16 serial devices such as cash registers or ATMs for recording data along with the video. Since most applications do not require local, labor-intensive supervision, the DX2000 Series DVR was engineered for complete remote operation utilizing TCP/IP network (LAN/WAN/Internet) or PSTN phone line connections. The system is operated or programmed (depending on password level) through the Web browser interface installed on your PC. The PC can be positioned in close proximity to the DX2000 or located halfway around the world.
Download PDF version Download PDF version