Vanderbilt AP01M-1220 Aliro AP01P+12V PSU, metal cabinet

Technical Specification

Features:
Read more
Additional info:

The AP01M-1220 is used when is a complete, easy-to-use door control is required.The AP01M-1220 is a compiled product consisting of the following:- Metal Housing with space for batteries and knock-outs for the signal cable wiring as well as the power mains cable- One mounted Aliro AP Access Point Controller PCB- One Power Supply Unit (PSU) including battery charging capabilities and outputs for mains loss and low battery voltage. The PSU incorporates a battery management system comprising low battery voltage detection and deep discharge protection to ensure that the battery is not permanently damaged through excessive discharge.A brownout filter ensures that short mains voltage dips do not create a false loss of mains alarm.Two LEDs assist with quick and easy installation by showing presence of mains, correct battery charging and a fault condition.Comprehensive protection is built-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs.Operational time (Example): One AP + one reader AR40S-MF + magnetic lock (current 0.85A). Door set locked. Maximum time: 8.5 hours with 1 x 12V, 7.0 Ah battery.

Read more
Make Vanderbilt
Manufacturer Vanderbilt Industries
Model code AP01M-1220
Series Aliro Door Controller + 12v PSU
Max No. of Doors per Controller 1
No of Cardholders 4
Universal / Wiegand Reader Interface Yes
Electrical Specifications Voltage: 100 ~ 240 V AC
Physical Specifications Dimensions mm: 355 x 330 x 85
Weight g: 4,000
Environmental Specifications Operating Temp oC: -10 ~ +40 C (14 ~ 104 F)
Operating Humidity %: 0 ~ 75
Additional info

The AP01M-1220 is used when is a complete, easy-to-use door control is required.

The AP01M-1220 is a compiled product consisting of the following:
- Metal Housing with space for batteries and knock-outs for the signal cable wiring as well as the power mains cable
- One mounted Aliro AP Access Point Controller PCB
- One Power Supply Unit (PSU) including battery charging capabilities and outputs for mains loss and low battery voltage.

The PSU incorporates a battery management system comprising low battery voltage detection and deep discharge protection to ensure that the battery is not permanently damaged through excessive discharge.
A brownout filter ensures that short mains voltage dips do not create a false loss of mains alarm.

Two LEDs assist with quick and easy installation by showing presence of mains, correct battery charging and a fault condition.
Comprehensive protection is built-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs.

Operational time (Example): One AP + one reader AR40S-MF + magnetic lock (current 0.85A). Door set locked. Maximum time: 8.5 hours with 1 x 12V, 7.0 Ah battery.

Download PDF version