Vanderbilt 5311 Cotag reader interface for non-Cotag systems

Technical Specification

Please note: this is a discontinued product.

Go to Replacement product

Vanderbilt 5311 Cotag reader interface for non-Cotag systems

Features:

Make: Vanderbilt
Model code: 5311 Cotag
LED / Beep: LED
Wiegand Interface: Yes
Clock-and-Data Interface: Yes

Additional info:

The 5311 reader interface makes it possible to integrate Cotag reading heads into non-Cotag access control systems. Popular data interfaces ensure easy integration with most host systems. The 5311 is easy to install and configure and provides reverse polarity protection via a self-resetting fuse. The operating parameters, interface requirements, distributor code and secondary code can all be easily configured using configuration tags supplied by the distributor. LEDs & horn may be driven internally or externally.This product is delivered without any configuration. The onboard interface library supports popular Clock&Data and Wiegand interfaces. The interface is set using a configuration card. The distributor code/secondary code is set by presenting a Cotag card containing the valid distributor code/secondary code.

Contact manufacturer Contact manufacturer

Datasheet Datasheet

Make	Vanderbilt
Manufacturer	Vanderbilt Industries
Category	Access Control>Access control readers
Model code	5311 Cotag
LED / Beep	LED
Wiegand Interface	Yes
Clock-and-Data Interface	Yes
Electrical Specifications	Voltage: 12 V DC
Physical Specifications	Dimensions mm: 110 x 195 x 40 Weight g: 400
Environmental Specifications	Operating Temp ^oC: 0 ~ 50 C (32 ~ 122 F)
Additional info	The 5311 reader interface makes it possible to integrate Cotag reading heads into non-Cotag access control systems. Popular data interfaces ensure easy integration with most host systems. The 5311 is easy to install and configure and provides reverse polarity protection via a self-resetting fuse. The operating parameters, interface requirements, distributor code and secondary code can all be easily configured using configuration tags supplied by the distributor. LEDs & horn may be driven internally or externally. This product is delivered without any configuration. The onboard interface library supports popular Clock&Data and Wiegand interfaces. The interface is set using a configuration card. The distributor code/secondary code is set by presenting a Cotag card containing the valid distributor code/secondary code.
Download PDF version Download PDF version