Nedap AEOS Security devices

Nedap Security Management's Camera Service software component can be used if more than only a live view of an IP camera is required. The software component controls the PTZ and can link the IP camera stream to the software component camera storage for recording.

Multiple time zones for central administration with a single server concept for multiple units that are located in different time zones.

The Identity & Authorisation Application means lower costs and higher security. Because it has an attractive, intuitively usable interface, there is virtually no need for training. The ability to multitask leads to higher productivity and improved customer service. Thanks to widgets, every functionality can be accessed quickly and efficiently. And if a task needs high attention, all other functions are moved to the background.

Nedap AEOS Count-groups licence allows counting administration for count groups in defined zones. The licence makes it possible to control the number of parked vehicles or to control the number of persons in an area. It is required for every count group in a zone.

Nedap's Intercom Message Mapper is especially designed for communication with a Commend intercom system.

Deny particular groups of carriers access to certain zones in special situations, for example during crises or when dealing with various threat levels. System administrators can (de)activate Verification, APB and Counting for each of these special carrier groups. The number of security levels that can be set with this licence is unlimited.

Nedap AEOS Key cabinet integration licence offers the possibility of integrating key management of key cabinets in AEOS. This licence supports the integration of specific electronic key cabinets supplied by Traka or Deister.

Airlock is not an Access Point itself but synchronizes multiple Access Points in such a way that only one can provide access at a time. Furthermore, it is capable of controlling the occupation of the lock. When connected to Airlock an Access Point will always ask the Airlock for exclusive rights to provide access. Since Airlock will only grant the exclusive rights to one Access Point at a time and the Access Point will release the exclusive rights after closing the door, only one door can be open at a time. This synchronization function applies to Badge handling, Manual unlock input, Provide access (server). The synchronization function does NOT apply to Emergency unlock input, Automatic unlock schedule, Access control de-activated and unlocked (server).

Nedap AX2002 is a AEbus extension set which increases AEbus distance to 300 meters.

Fire Panel Integration enables the AEOS graphical alarm handler to receive alarms of the modules and sensors (e.g. smoke detectors) connected to a fire panel. This Software Component is pre-configured for the Notifier ID 3000 Fire Panel.

This licence has been developed to allow dynamic administration of locker systems in AEOS. Contrary to the Cabinet Access Point licence which treats access to lockers in the same way as for access points, the LoXS Integration licence allows system users to dynamically assign lockers to carriers and demand their return after a set period of time. This set period of time varies from one-off use (toggle), to a short-term period (e.g. one day) to a semi-permanent period (long-term, for e.g. “personal” lockers in schools).

The AP3006 intrusion I/O unit can be connected to the Intrusion Base Panel. The panel includes the module to connect up to 16 supervised sensors and contacts to the system.

Nedap AEOS Aebox is the housing for the various AEpack modules used for AEOS security management. The AEbox is available for 3 and 4 AEpacks. The status LEDs are displayed in the AEbox screen, providing a clear and comprehensive indication of each module's status. As the screen provides an at-a-glance display of the modules' configuration status, there is no need to open the AEbox in order to test module functionality by hand. A tamper switch protects the AEbox against unauthorized access to the installed hardware.

Adapting to changing requirements In the security management world, change is the only constant factor. With many security systems, responding to this relentless change is time consuming and expensive. That is why Nedap developed AEOS, a truly integral security management platform that is simple and intuitive to use. Nedap has spent over 14 years continually developing and improving AEOS to create a system that provides unlimited possibilities. The company has invested continuously in adapting its technology framework to the latest standards. Foundation of AEOS The development of AEOS is based on the daily use of the system by receptionists, guards, security managers and ICT managers. Because of this, AEOS is the world’s smartest security solution. The company reinforces this by embracing the principles of: flexibility, cost effectiveness and ease of use. These principles guide everything it does. Flexible: a security system gives you unlimited functionality, so you can set up your system to suit your needs exactly Cost effective: the costs for maintaining and extending your system can be minimised User friendly: One system is easier to operate and control In AEOS 3.1.7 Nedap has added a new functionality to improve the design and usability of its interfaces.

The AP3004 10-relay output pack allows expansion of AEOS by adding 10 outputs for integral control of external equipment such as signaling devices, entrances, lifts, barriers and similar equipment. AP3004 is equipped with a local selftesting function, which checks all connected contacts, regardless of network availability. After completion of the self-test procedure, the AP3004 automatically returns to normal operating mode. The LED indicator lights clearly show all of the status information.

Nedap AEOS Configuration & Maintenance is designed for administrators of AEOS.

The AP3002 with 16 digital inputs has been specially designed for integrating sensors in AEOS. The status of the connected sensors is also monitored, along with sabotage and short-circuit. Local alarms can be signaled via the two extra relay outputs. The AP3002 is equipped with a local selftesting function, which checks all connected inputs, regardless of network availability. After completion of the self-test procedure, the AP3002 automatically returns to normal operating mode. The LED indicator lights clearly show all of the status information for each input.

Nedap AEOS Invexs MN190 is a MIFARE Nedap reader for indoor use and is resistant to extreme cold and heat. Unique multiple card reading technology makes the MN190 reader capable of simultaneously reading different card technologies, which is extremely useful during migrations or when a company uses a mix of card technologies. It is easy to configure and program.

Nedap AEOS Invexs MN170B is a MIFARE Nedap reader for indoor use. Unique multiple card reading technology makes the MN170B reader capable of simultaneously reading different card technologies, which is extremely useful during migrations or when a company uses a mix of card technologies. It is easy to configure and program.

Nedap AEOS Convexs M80FG is a flush mount Mifare reader. It can be linked to external controllers using a Wiegand interface. Also, migration can be implemented in controlled phases, as the Convexs M80FG is capable of handling several different card types simultaneously.

Nedap AEOS Convexs MN80G is a surface mount Mifare Nedap reader. It can be linked to external controllers using a Wiegand interface. Also, migration can be implemented in controlled phases, as the Convexs MN80G is capable of handling several different card types simultaneously.

Nedap AEOS Invexs MND170B is a MIFARE Nedap DESfire reader for indoor use. Unique multiple card reading technology makes the MND170B reader capable of simultaneously reading different card technologies, which is extremely useful during migrations or when a company uses a mix of card technologies. It is easy to configure and program.

Nedap AEOS Invexs M170B is a MIFARE reader for indoor use. Unique multiple card reading technology makes the M170B reader capable of simultaneously reading different card technologies, which is extremely useful during migrations or when a company uses a mix of card technologies. It is easy to configure and program.

Nedap AEOS Convexs MN80C is a surface mount Mifare Nedap reader. It can be linked to external controllers using a Wiegand interface. Also, migration can be implemented in controlled phases, as the Convexs MN80C is capable of handling several different card types simultaneously.

Nedap AEOS Convexs MN80FC is a flush mount Mifare Nedap reader. It can be linked to external controllers using a Wiegand interface. Also, migration can be implemented in controlled phases, as the Convexs MN80FC is capable of handling several different card types simultaneously.

Nedap AEOS Convexs M80FC is a flush mount Mifare reader. It can be linked to external controllers using a Wiegand interface. Also, migration can be implemented in controlled phases, as the Convexs M80FC is capable of handling several different card types simultaneously.

Nedap AEOS Convexs MN80FG is a flush mount Mifare Nedap reader. It can be linked to external controllers using a Wiegand interface. Also, migration can be implemented in controlled phases, as the Convexs MN80FG is capable of handling several different card types simultaneously.

Nedap AEOS Invexs MND190 is a MIFARE Nedap DESfire reader for indoor use and is resistant to extreme cold and heat. Unique multiple card reading technology makes the MND190 reader capable of simultaneously reading different card technologies, which is extremely useful during migrations or when a company uses a mix of card technologies. It is easy to configure and program.