Linear Security devices

Linear MCS412001 2-channel visor transmitter is compatible with 300 MHz Multi-Code receivers and has easy access to battery and coding switches. It is supplied with visor clip.

Linear MCS306010 1-channel key ring transmitter is compatible with 300 MHz Multi-Code receivers and has easy access to battery and coding switches.

Linear MCS308911 1-channel visor transmitter is compatible with 300 MHz Multi-Code receivers and has easy access to battery and coding switches. It is supplied with visor clip.

Linear's MCS109950 gate receiver is designed for use with automatic gate operators or systems where a remote antenna is needed. . Nearly all gate operators offer either 24 or 12 volts AC or DC as accessory power. The MCS109950 has a single relay and replaces three different Multi-Code gate receivers. 

Linear D-67 1-channel receiver is designed for use in security systems and remote switching functions. Typical applications for the receiver include adding a wireless zone, a panic button, or creating a remote arm/disarm feature for a hardwired alarm panel. Each time a transmitter is triggered with a digital code matching the receiver’s digital code, the receiver’s relay will activate for four seconds.

Linear DXR-701 is a digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters. This receiver can be used in a variety of remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the relay output activates. The relay has four optional output configurations. A nine-inch wire lead serves as the receiver's antenna. The red program indicator lights during RF reception. The installer can verify that signals are being sent from transmitters and diagnose interference problems by viewing the indicator. The indicator also lights during memory programming/erasing and flashes to count the number of transmitters in memory.

Linear DXSR-1504 is a four channel supervised digital receiver with solid state outputs designed for use with Linear’s DX and DXS Format transmitters. This receiver can be used in a variety of security and remote control applications.

There is nothing incremental about the AE-500. For a simple system, it comes fully equipped for your telephone entry application. It has ample non-volatile memory for up to 250 users, which means that even if you start with 25 users, you won’t need to keep adding more memory blocks (at greater expense) as your needs grow.

Linear D-22A handheld transmitter is a single-channel transmitter normally used as a "panic button" in security systems. It is also used in many remote switching applications where a portable transmitter is required. Each transmission causes the red LED indicator on the front of the transmitter to light, showing that the transmitter is sending a signal and that the battery is in good condition.

Linear has equipped the AE2000Plus with an attractive, highly functional display. Visitors will have no trouble using the AE2000Plus to locate and contact residents. A temperature compensated, back-lit, VGA resolution, LCD display presents up to 24 names at a time on separate alphabetical screens.

Linear’s AE-100 is a versatile telephone entry system for smaller commercial applications. But its feature set is more advanced and comprehensive than systems three times its size. It has local programming with system keypad and remote programming with touchtone telephone.

Linear MLTL2DN49IR is a mini line track day/night IR camera.

ACT-31B is a factory block-coded transmitter with the following features: compatible with all Linear MegaCode™ receivers and controllers, suitable for everyday installations, ideal for single-family, multi-tenant, and commercial applications.

Linear INC2DN212E is a true day/night outdoor camera package with mechanical IR cut-filter.

Linear INC2CH38 is a cylindrical indoor housing with indoor camera.

Linear prox.pad wiegand 125 kHz proximity reader with keypad is a stand alone proximity reader and keypad that can be directly mounted to a single-gang electrical box or to most flat surfaces. The prox.pad provides standard access control functionality with the use of its two relays and two inputs for request to exit and door position. By utilising the proximity reader and keypad together, a higher level of security is achieved by requiring both to grant access. The prox.pad can be used for stand alone access control, or used as a reader for IEI access systems or most Wiegand systems. The proximity reader is capable of being mounted up to a maximum of 10 feet away from the prox.pad.

Linear DXT-21 2-button, 1-channel handheld transmitter is a battery powered portable transmitter designed for use with Linear’s DX Format receivers. Each transmitter can be used in a limitless number of wireless remote control applications.

Linear prox.pad plus integrated proximity reader and controller with keypad. The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position, and enhanced system functionality when used with Hub Manager Professional software. The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality. The software can communicate to the prox.pad plus either through a 485 connection, or on a LAN/WAN using the SEG-1 TCP/IP communication device.

The E3-Series embedded browser-based network appliances make advanced security technology reliable and affordable for any entry level access control application. Both the Essential and Elite can be seamlessly scaled up, via software keys, to other eMerge E3-Series systems providing increased door and reader capacity, enhanced features, and higher level capabilities.These full-featured, self-contained hardware/software access systems are perfect for commercial, industrial, banking, medical, retail, hospitality, and other businesses where users need to secure their facilities, manage access of personnel, create and analyse reports, and monitor the system remotely from any web browser.

AE1000Plus is a telephone entry system with access control. Thanks to networking capabilities, the AE1000Plus can be expanded for requirements of up to 10,000 users. Commercial sites like apartments, condominiums, dormitories, and hospitals can all benefit from its simplicity and its expansive range of capabilities.

Linear DXR-702 is a two-channel digital receiver with two isolated relay outputs designed for use with Linear’s DX Format transmitters. This receiver can be used in a variety of remote control applications.

ACT-34B belongs to the MegaCode transmitter family with the following features: compatible with all Linear MegaCode™ receivers and controllers, factory block-coded facility and ID codes, suitable for everyday installations, ideal for single-family, multi-tenant, and commercial applications.

These full-featured, self-contained hardware/software access systems are perfect for commercial, industrial, banking, medical, retail, hospitality, and other businesses where users need to secure their facilities, manage access of personnel, create and analyse reports, and monitor the system remotely from any web browser.

Copper Cop is an efficient, dependable and reliable security protection solution designed to combat theft of commercial air conditioning (HVAC) units. Copper Cop can be installed and activated in minutes by a security professional and, unlike other HVAC alarm products, does not require an HVAC, plumber’s or electrical contractor’s license.