Bosch Electronic door locks

Extend BIS Access Engine by the ability to control and manage doors that are not continuously online. Enjoy the advantages of centralised door management without the cost of a dedicated network. Choose from a wide range of compatible lock cylinders and door fittings.

Extend BIS Access Engine by the ability to control and manage doors that are not continuously online. Enjoy the advantages of centralised door management without the cost of a dedicated network. Choose from a wide range of compatible lock cylinders and door fittings.

RS485 connection to the AMC2 controller 16 inputs & 16 outputs extension board, up to three per AMC Status of inputs and outputs shows on AMC2 LCD display Transfer rate to EXT interface (RS485): 9,6kBit/sec

RS485 connection to the AMC2 controller 16 inputs extension board, up to three per AMC Status of inputs and outputs shows on AMC2 LCD display Transfer rate to EXT interface (RS485): 9,6kBit/sec

RS485 connection to the AMC2 controller 8 inputs & 8 outputs extension board, up to three per AMC Status of inputs and outputs shows on AMC2 LCD display Transfer rate to EXT interface (RS485): 9,6kBit/sec

13.56 MHz proximity reader, compatible with Bosch access modular controllers (AMC2), as well as access control software (BIS/ACE, AMS and APE) OSDP V2 Secure Channel, AES 128 bit encryption and Bosch coded MIFARE DESFire EV1 credential support for high level end-to-end security Support of multiple card technologies (standard iCLASS, iCLASS SE, iCLASS Seos, MIFARE Classic, and MIFARE DESFire EV1) IP55 rating allows both indoor and outdoor installation

Integration of Bosch and third party systems via open interfaces and SDK All relevant information in one user interface, and intuitive operation via interactive maps and HTML5 action plans Fully embedded access control Full event log and audit trail for forensic investigations Scalable system that grows with your needs

13.56 MHz proximity reader, compatible with Bosch access modular controllers (AMC2), as well as access control software (BIS/ACE, AMS and APE) OSDP V2 Secure Channel, AES 128 bit encryption and Bosch coded MIFARE DESFire EV1 credential support for high level end-to-end security Support of multiple card technologies (standard iCLASS, iCLASS SE, iCLASS Seos, MIFARE Classic, and MIFARE DESFire EV1) IP55 rating allows both indoor and outdoor installation

Integration of Bosch and third party systems via open interfaces and SDK All relevant information in one user interface, and intuitive operation via interactive maps and dynamic action plans Fully embedded access management Full event log and audit trail for forensic investigations Scalable system that grows with your needs

13.56 MHz proximity reader, compatible with Bosch access modular controllers (AMC2), as well as access control software (BIS/ACE, AMS and APE) OSDP V2 Secure Channel, AES 128 bit encryption and Bosch coded MIFARE DESFire EV1 credential support for high level end-to-end security Support of multiple card technologies (standard iCLASS, iCLASS SE, iCLASS Seos, MIFARE Classic, and MIFARE DESFire EV1) Equipped with keypad The keypad functionality can also be used for a variety of access control features including the option to set a door to long-term open IP55 rating allows both indoor and outdoor installation

13.56 MHz proximity reader compatible with access controllers with Wiegand interfaces Fully compatible with the Bosch Access Management portfolio, including the Management Software Systems (BIS/ACE, AMS and APE), the Access Modular Controller (AMC2), and the MIFARE and iCLASS credential portfolio Support of multiple card technologies (iCLASS SE, iCLASS Seos, MIFARE DESFire EV1) Quick reading response for high performance level The use of NFC on mobile phones to set up the communication with the reader enables mobile phones to be used as access credentials IP55 rating allows both indoor and outdoor installation

Compact reader for door jambs with beeper and multi-coloured LED display Plastic-coated for indoor and outdoor mounting Current consumption 20 mA/medium, 110 mA peak 45 cm connection cable (10-wired) Non-contact access control reader for connecting to an access controller with Wiegand interface

Compact reader with beeper and multi-coloured LED display Plastic-coated for indoor and outdoor mounting Current consumption 20 mA/medium, 75 mA peak 45 cm connection cable (10-wired) Non-contact access control reader for connecting to an access controller with Wiegand interface

13.56 MHz proximity reader for connecting to access controller with Wiegand interface Supports multiple technologies (standard iCLASS, MIFARE®, and MIFARE DESFire® EV1) Proximity/long range reader with beeper and multi-coloured LED display Rugged, weatherised polycarbonate enclosure, designed to withstand harsh environments “Parking Hold” feature allows connection to a loop detector to ensure accurate detection of vehicles in parking lanes iCLASS proximity cards that work with diversified keys of 64-bit length for two-way authentication, encrypted data is transmitted between the reader and card

13.56 MHz proximity reader compatible with access controllers with Wiegand interfaces Fully compatible with the Bosch Access Management portfolio, including the Management Software Systems (BIS/ACE, AMS and APE), the Access Modular Controller (AMC2), and the MIFARE and iCLASS credential portfolio Support of multiple card technologies (iCLASS SE, iCLASS Seos, MIFARE DESFire EV1) Equipped with keypad The keypad functionality can also be used for a variety of access control features including the option to set a door to long-term open Quick reading response for high performance level The use of NFC on mobile phones to set up the communication with the reader enables mobile phones to be used as access credentials IP55 rating allows both indoor and outdoor installation

An access control system for stand-alone application or for integration with other systems, such as the Bosch video management system BVMS or Bosch B and G series intrusion panels As a stand-alone system, it features a simple-to-use map and alarm viewer for a rapid assessment of all the devices and entrances on the site As an integrated system, it allows the operator of a video management system to perform door-related tasks like video-based ID  verification, to grant and deny access, or to disable doors Intrusion areas can be armed directly from the Map View, and intrusion panel users can be centrally managed Combines high-end access control features, performance and availability with intuitive operation Web-based visitor management Comprehensive security management: Integrates with intrusion and video systems Highly scalable Easy to configure

Class-leading reading performance with powerful quad-core CPU technology The configuration allows four different access modes for the user - Card plus Fingerprint; Card or Fingerprint; Card only; Fingerprint only Flexibility with multi-card support due to dual-frequency RFID technology Supports most types of RFID card standards with a single device including MIFARE, HID iCLASS, DESFire, HID Prox and EM Features fake fingerprint prevention technology. Using dynamic pattern, liveness feature and unnatural feature analysis, the engine blocks fake fingerprints made from various materials including clay, rubber, glue, paper, film and others Equipped with the ability to read Bosch coded Mifare credentials, ensuring a straight-forward configuration and high level of security Integration with AMS and BIS/ACE 4.5 (and later versions) for easy enrollment and configuration of fingerprint templates and card data Rugged IP67/IK09 housing for tough environment and outdoor installations

Provides a quick, hassle-free experience for visitors Supports receptionists with features that make their many tasks smooth, efficient and secure Keeps track of expected, checked-in and overdue visitors Handles even high visitor volumes as smoothly and efficiently as possible Allows hosts to easily pre-register their visitors for smoother, faster processing on the day

A fully supervised, addressable SDI/SDI2 bus device that allows access control integration for Bosch compatible control panels Direct interface to compatible Wiegand card readers On-board buzzer output and supervised on-board points Request to Exit and Request to Enter inputs that can have a shunt only option Four door states: Locked, Unlocked, Secured, Fire Unlock In a combination Fire/Intrusion system, it should not be used to lock doors used for emergency egress unless these doors have a mechanical release mechanism

Reader with beeper and multi-coloured LED display Wiegand output for 125 kHz card technology (EM) Indoor and outdoor mounting

Provides a quick, hassle-free experience for visitors Supports receptionists with features that make their many tasks smooth, efficient and secure Keeps track of expected, checked-in and overdue visitors Handles even high visitor volumes as smoothly and efficiently as possible Allows hosts to easily pre-register their visitors for smoother, faster processing on the day

An access control system for stand-alone application or for integration with other systems, such as the Bosch video management system BVMS or Bosch B and G series intrusion panels As a stand-alone system, it features a simple-to-use map and alarm viewer for a rapid assessment of all the devices and entrances on the site As an integrated system, it allows the operator of a video management system to perform door-related tasks like video-based ID  verification, to grant and deny access, or to disable doors Intrusion areas can be armed directly from the Map View, and intrusion panel users can be centrally managed Combines high-end access control features, performance and availability with intuitive operation Web-based visitor management Comprehensive security management: Integrates with intrusion and video systems Highly scalable Easy to configure

An access control system for stand-alone application or for integration with other systems, such as the Bosch video management system BVMS or Bosch B and G series intrusion panels As a stand-alone system, it features a simple-to-use map and alarm viewer for a rapid assessment of all the devices and entrances on the site As an integrated system, it allows the operator of a video management system to perform door-related tasks like video-based ID  verification, to grant and deny access, or to disable doors Intrusion areas can be armed directly from the Map View, and intrusion panel users can be centrally managed Combines high-end access control features, performance and availability with intuitive operation Web-based visitor management Comprehensive security management: Integrates with intrusion and video systems Highly scalable Easy to configure

Stand-alone deployment, with own map viewer and alarm & event viewer, or as integral part of a video management system (e.g. BVMS) Combines high-end access control features, performance and availability with intuitive operation Highly scalable Easy to configure Situation always under control for doors, elevators, car parks and visitors, with alarm list and for different threat scenarios Centralised user and event management of intrusion panels Comprehensive security management: Integrates with intrusion and video systems Robust and Secure: Multi-level architecture for system reliability, comprehensive data security and privacy protection

An access control system for stand-alone application or for integration with other systems, such as the Bosch video management system BVMS or Bosch B and G series intrusion panels As a stand-alone system, it features a simple-to-use map and alarm viewer for a rapid assessment of all the devices and entrances on the site As an integrated system, it allows the operator of a video management system to perform door-related tasks like video-based ID  verification, to grant and deny access, or to disable doors Intrusion areas can be armed directly from the Map View, and intrusion panel users can be centrally managed Combines high-end access control features, performance and availability with intuitive operation Web-based visitor management Comprehensive security management: Integrates with intrusion and video systems Highly scalable Easy to configure Easy to use: Intuitive GUI for maps and alarm viewer

Stand-alone deployment, with own map viewer and alarm & event viewer, or as integral part of a video management system (e.g. BVMS) Combines high-end access control features, performance and availability with intuitive operation Highly scalable Easy to configure Situation always under control for doors, elevators, car parks and visitors, with alarm list and for different threat scenarios Centralised user and event management of intrusion panels Comprehensive security management: Integrates with intrusion and video systems Robust and Secure: Multi-level architecture for system reliability, comprehensive data security and privacy protection

Distributed access control system with graphical alarm management Seamless integration and interaction with video, fire, intrusion and PA/VA systems via the common BIS platform High resilience thanks to a 4-tier system architecture and redundancy of critical components Integration of third-party products via open and secure protocols and SDK Efficient enrollment process that makes onboarding faster and more secure

An access control system for stand-alone application or for integration with other systems, such as the Bosch video management system BVMS or Bosch B and G series intrusion panels As a stand-alone system, it features a simple-to-use map and alarm viewer for a rapid assessment of all the devices and entrances on the site As an integrated system, it allows the operator of a video management system to perform door-related tasks like video-based ID  verification, to grant and deny access, or to disable doors Intrusion areas can be armed directly from the Map View, and intrusion panel users can be centrally managed Combines high-end access control features, performance and availability with intuitive operation Web-based visitor management Comprehensive security management: Integrates with intrusion and video systems Highly scalable Easy to configure Easy to use: Intuitive GUI for maps and alarm viewer