Check out our special report on casino security
NVT presents the NV-1613S 16-channel passive transceiver stub hub
Product Profile
The NVT Model NV-1613S is a compact 16-channel passive transceiver hub that allows transmission of real-time monochrome or colour video over Unshielded Twisted-Pair (UTP) cable. Baseband (composite) signals of any type are supported.
“Up-the-coax” type signal may be sent over the same wire pair at distances up to 750ft (225m).
The unparalleled interference rejection ability of the model NV-1613S hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.
Features:
- Compact rack mountable 19" 1U high enclosure features 16-channels
and is only 1.54" (40mm) deep - Use with any NVT passive transceiver or hub for full motion CCTV at distances up to 750ft (225m)
- Use with any NVT active receiver or hub as a rack-mountable passive
transmitter for distances up to 3,000ft (1km) - RJ45 video connectivity with optional NV-RJ45A RJ45 to-screw-terminal adaptors (included)
- No power required
- Exceptional interference rejection
- Built-in transient protection
- Supports “up-the coax” type control signal up to 750ft (225m)
- Compatible with qualified UTP cameras
- Limited lifetime warranty
Technical Specification
| Make | NVT Phybridge |
|---|---|
| Manufacturer | NVT Phybridge |
| Category | CCTV>Analogue Transmission |
| Model code | NV-1613S |
| Transmission type | UTP / CAT 5 transmission |
| Video Inputs | 16 channels |
| TX/RX | TX/RX |
| Telemetry Control | Yes |
| Pre & Post Alarm Image Buffer | Yes |
| Video Outputs | 1 |
| Transmission Range m | 225 |
| Physical Specifications | Weight g: 550 |
| Environmental Specifications |
Operating Temp oC: -30 ~ +75 Operating Humidity %: 0 ~ 95 |
| Additional info | Small size, less than 1" deep. Supports screw-terminal or RJ45 UTP video inputs. Built-in transient protection. Supports "up-the-coax" type control signal up to 750 ft. Transmit up to 750ft, 3000ft with an active receiver. The NVT Model NV-1613S is a compact 16-channel passive transceiver hub that allows transmission of real-time monochrome or colour video over Unshielded Twisted-Pair (UTP) cable. Baseband (composite) signals of any type are supported. |
Compare NVT Phybridge NV-1613S with Analogue Transmission from other manufacturers
- See other NVT Phybridge products
- NVT Phybridge CCTV Switchers & Switches
- NVT Phybridge CCTV connectors
Related Whitepapers
Six ways to eliminate costs, risks and disruption to your network
Security investments retailers should consider for their 2021 budget
One system, one card
DownloadAligning physical and cyber defence for total protection
DownloadUnderstanding AI-powered video analytics
DownloadEnhancing physical access control using a self-service model
DownloadHow to implement a physical security strategy with privacy in mind
Download
