Delta Scientific Gates & Fencing

3546-7NP is configured not to generate a pulse when initial power up or power resumption occurs. This can avoid unexpectd gate operations (raising or lowering of gate arms, sliding gate operation, motorised teeth and barricade actuation). Recommended for use with ALL of DELTA’ S vehicle access control equipment and most other manufacturers.

3546-8NP is configured not to generate a pulse when initial power up or power resumption occurs. This can avoid unexpectd gate operations (raising or lowering of gate arms, sliding gate operation, motorised teeth and barricade actuation). Recommended for use with ALL of DELTA’ S vehicle access control equipment and most other manufacturers.

Delta Scientific Corporation TT300 rolling pedestrian gate is ideal for installations that need rugged performance, the drive mechanism is electro-mechanical or hydraulic. Final drive is via rack and pinion with V-groove wheels in sub-grade or at-grade ground tracks.

Delta Scientific Corporation SGC1000 is designed to fill the need for a rugged manual crash rated swing gate. The design of the end support assemblies add to its crash rated performance. A ground track is not needed.

Delta Scientific Corporation DSC 288 high security sliding gate has a positive latch pin latch that secures the gate in the fully closed position and protects against mobs forcing the gate open. The gate also has programmable logic controller (PLC) with inteli gate control features. It has built in safety edge, IR safety beam and inductive safety loops.

Delta Scientific Corporation TT300 S rolling pedestrian gate is ideal for installations that need rugged performance, the drive mechanism is electro-mechanical or hydraulic. Final drive is via rack and pinion with V-groove wheels in sub-grade or at-grade ground tracks.

Virtually unlimited in styles and aesthetics, safety consultants can specify having ornamental steel trim attached directly to the Delta Scientific DSC800 decorative bollard or select cast aluminium, iron or bronze to slip over the crash tube. If damaged, one simply slides off the old sleeve and slips on a new one. The designer bollards are available in stainless steel, cast stone, ceramics and epoxy based stones. They can be fitted with an internal warning light for increased visibility and engineered to suit high traffic volumes. These decorative bollards come in six different series – traditional, silhouette, sculptured, omni, lineas and architect. Protection levels all meet or exceed U.S. Department of Defense and Department of State certifications. They hold the highest ratings ever given to bollard systems. The DSC800 is certified at K4, L2, and able to stop a 6,800 kg vehicle at 50 kph. DSC800 bollards are used to protect important facilities from Windsor Castle to a hundred-plus embassies, the Ronald Reagan Library and major government buildings around the world.

The TT280 Linear Crash Gate will withstand the impact of a 6,803 kg vehicle striking the gate at 80 KPH, suffering no significant damage. The TT280 was created for the highest security applications such as embassies, government facilities and corporate headquarters. The gate can be tailored to match the surrounding decor in a wide variety of architectural treatments. Delta Scientific's sliding security gates are all crash rated. One model, the TT280, pictured here, exceeds every known standard for crash worthiness. Some models operate without contact with the ground across the opening, one is a manually operated swing gate while others operate with rack and pinion drives across V-groove wheel ground tracks while incorporating IR safety beam and safety edges. Swing versions are also available. The clear openings range from 12 to 30 feet (3,657 mm to 9,144 mm). The standard height for all, except the swing gate, is 109 inches (2,769 mm).

Delta Scientific Corporation SC3000S high security cantilever gate is ideal for installations that need rugged performance. The drive mechanism is electro-mechanical or hydraulic. Final drive is via rack and pinion with V-groove wheels in sub-grade or at-grade ground tracks.

Crash rated linear gate End support buttresses Ground tracks Receiving end interlock bolt system Rack and pinion TT260 electro-mechanical gate operator Associated controls and safety equipment.