Designed for residential and small to medium-sized businesses Offers 64 zones and 16 areas and comes with an enclosure and a transformer An on-board PSTN dialer transmits an alarm via the common telephone network to a phone and / or a communication center while at the same time a voice message is sent to the owner’s landline or mobile phone to inform about an intruder’s presence Commissioning the system is simple and involves minimum programming: the default settings already cover 90 % of the available functionality Programming can either be done via the AMAX TEXT, LCD and LED keypads or via the programming software (A-Link Plus) The intrusion system can be used with both RADION wireless peripherals, operating at 433 Mhz and hardwired detectors from Bosch

Bosch ISN-GMX-P3S4 spacer for sesmic detector with 4 mm thickness.

Bosch ISN-GMA-S6 is a fixing device used with seismic detectors to monitor safes and strong rooms. It consists of a detector plate, a door plate, and a standby plate.

Bosch ISN-GMX-P3S is a swivel plate for use with ISN-SM-50 seismic detectors. It monitors safes and strong rooms with exposed keyholes.

With an AE20 Plastic Enclosure Connects directly to the data bus of a compatible control panel Each expander adds eight fully programmable Form C relay outputs Each output operates individually from the other seven outputs for complete flexibility

Bosch ISN-GMX-PZ is a swivel plate for use with ISN-SM-80 seismic detectors. It monitors safes and strong rooms with exposed keyholes.

Bosch ISN-GMXW-G0 is a watertight housing that protects seismic detectors from water and dust.

Bosch MP3 is a L-curved metal pole for mounting to vertical surfaces for pole mounting photoelectric detectors. The MP3 is shipped in packages of two.

Bosch ISN-GMX-B0 is a floor socket used for floor mounting a seismic detector.

Bosch ISN-GMX-P0 is a mounting plate for seismic detectors. It is suitable for mounting seismic detectors to steel or concrete surfaces. The mounting plate is screwed or welded directly onto the surface.

Bosch ISN-GMX-S1 test transmitter for installation under a seismic detector. It checks the detector and the physical contact between the detector and the protected object.

Bosch ISN-GMX-W0 wall mounting kit for surface or flush mounting a seismic detector to the wall.

Male A to Male A USB cable for local programming of control panels with on-board USB ports Allows programming on-site without an Ethernet cable or interface module

With a D203 metal enclosure Connects directly to the data bus of a compatible control panel Each expander adds eight fully programmable Form C relay outputs Each output operates individually from the other seven outputs for complete flexibility

Bosch D137 is used to mount accessory modules in B8103, D8108A, and D8109 enclosures.

Bosch ISN-GMX-P3S2 spacer for sesmic detector with 2 mm thickness.

Bosch MP2 is a straight metal pole measuring 1.2 m (4 ft) for pole mounting photoelectric detectors. The MP2 is shipped in packages of two.

Bosch ISN-GMX-D7 is an anti-drill foil used with seismic detectors to provide drill protection. It is inserted in the detector's cover to provide extra tamper protection.

Provides a local connection between compatible control panels and approved applications RS-232/USB connectivity Enhanced direct connection for Remote Programming Software (RPS) RJ-16 data bus Transparent enclosure Diagnostic light emitting diodes (LEDs)

Bosch PC1A weather enclosure protects detectors when mounted outside. The enclosure’s dimensions are 39.4 cm x 10.3 cm x 6 cm (15.5 in. x 4 in. x 2.4 in.). It is shipped in packages of two.

Receives RF signals from RADION transmitters, repeaters, and glassbreaks Operates at 433.42 MHz For use with compatible SDI2 bus control panels Dual internal antennas provide spatial and polar RF signal reception for high reliability Cover and wall tamper protection Multiple device enrollment options as well as RF diagnostics ensure efficient and effective installation Supports supervision of wireless points (504), keyfobs (1000), and repeaters (8) External status LEDs 

Bosch SE 50 LSN blocking unit is used as a mechanical lock for doors. The unit is programmable via the control panel. It processes the status reports of all components in the system, communicates these reports to the intrusion system and controls the SPE blocking element. The control unit has a lock line for connecting bolt contacts and two primary lines for connecting e.g. magnet contacts. The control unit is mounted in the secure area.

Combination tamper switch senses when the opens and if removed from the wall Includes a wire loop that can accommodate additional tamper outputs

Connects directly to the data bus of a compatible control panel Each expander adds eight fully programmable Form C relay outputs Each output operates individually from the other seven outputs for complete flexibility

A sophisticated management and visualisation solution for small to medium fire or intrusion detection systems All relevant information in one user interface, and intuitive operation via interactive maps and HTML5 action plans Ergonomic central console guides and unburdens the operator Full event log and audit trail for forensic investigations

Connecting 6 detector zones (conventional detector or monitoring contact inputs) Connecting 4 free control outputs Connecting arming devices (e.g. NBS 10) with associated system components Monitoring the primary lines for alarms, short circuits or wire interruptions Expanded system limiting values in the "improved version" LSNi mode

Transfers program information to and from the control panel Use the programming key to quickly program a group of Easy Series Intrusion Control Panels with the same characteristics The programming key is colour-coded blue

Programmable input point functions Easy to read switch addressing 2 interconnect wiring connectors Provides eight points Industrial, commercial, and institutional facilities are typical installations for the module