Aiphone Door access control

Aiphone GT-203HB is a vandal resistant 2x3-module surface mount box for GT Series entrance panel.

Aiphone GT-4B is a flush mount 4-module back box.

Aiphone GTW-DP is a distribution point terminal slip for R1/R2 audio lines.

Allows one PS-2420UL to power up four GT-1C7W app-enabled tenant stations Replaces existing GT-4Z adaptors in a standard GT system, and requires 1 PS-2420UL per GT-4ZP Includes 4 power jumpers (GTW-24J) that are to be installed on the GT-1C7W between the B1/B2 and +/- terminals, which provides power to the GT-1C7W without having to install a local PS-2420UL for each tenant station

Allows multiple buildings to communicate across a single, logical network Allows up to 480 Entrances, 96 Guard Stations, and 5,000 tenants

Provides selective door release capability Compatible with JP, JF, and KB Series Both normally open and normally closed output options

Interfaces AX video door station with 3rd party alternate transmission methods for longer distances Transmitter module for fiber connection

Allows two master stations to answer a single door station Combined use with RY-AC/A for external signaling

Weather resistant Vandal resistant Inside space for cabling Mounts to flat wall surface

Weather resistant Includes the SBX 2G/A surface mount box and PS POE splitter to power the sensor Powered from either a PoE network drop or from the LAN 2 output on an IX Series door station (requires PoE+ switch) Form C dry contact output can be connected to the trigger input of an IX Series door station Allows visitors to place a call without touching the call button on the door station Sensor is illuminated in blue while in standby and turns green when activated

Works with existing 2-conductor wire Supplies PoE to stations Rack mount receiver LED status indicators

 A UL listed 12V DC, 5A plug-in power supply Used to power ACS-2DR two-door access control starter kit and ACS-IO I/O starter kit

An interface between the door release contact on the Aiphone master station or CEU and the actual release mechanism Form C relay for 18-24V DC intercom systems Both normally open and normally closed output options

UL-514-A listed electrical box included at the base Access panel at the rear base of the tower Built-in threaded studs in base of the tower ASSISTANCE signage Beacon/Strobe is always lit; flashes during emergency call-in (Requires 24V DC) Weather and vandal resistant LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meets ADA regulations

Aiphone GF-4P is a 4-call button panel for GT-SW.

Provides ability to select/call 16 additional door/sub stations Mounts directly to Master Station or other AX-16SW with supplied brackets

16-Gauge stainless steel lockable enclosure gives added protection to video door stations after business hours Designed to be mounted with AX-DV or AX-DVF

Allows an external device to be triggered when the intercom is called External device will be activated momentarily as long as the call button on the door station is activated

Long distance adaptors for colour video door stations. 

802.3af PoE Four contact inputs Ten Form C relay outputs 24V AC/DC 500mA relay contact rating Mountable to a 170mm DIN rail or directly to a wall

Works with existing 2-conductor wire Supplies PoE to stations Rack mount receiver LED status indicators

Supports up to 500 registered SIP devices and up to 75 concurrent calls Dual Gigabit network ports with integrated PoE+ Built-in call recording server; recordings accessed via web interface Built-in call detail records for tracking phone usage Supports any SIP video endpoint Supports voice mail Supports call queue for call volume management

Steel construction Six conduit knockouts

Flush wall-mounted Panel is made of self-extinguishing resin Frame & Back Box is made of self-extinguishing plastic

Vandal resistant stainless steel Mounts Intercom and Access Control device together Any 1-gang Audio-only or Audio Video Door Station can be used Blank faceplate allows wide range of mounting options Hooded covering to protect units from direct exposure to weather Tamper resistant mounting hardware

EMERGENCY lettering Strobe is always lit; flashes during emergency call-in (requires 24V DC) Camera arm with universal pipe threading Weather and vandal resistant Lightweight LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meet ADA regulations UL-514-A listed electrical box included at the base Access panels at the base and middle of the tower

Aiphone GF-10KP is a vandal resistant panel for GT-10K keypad module.

Aiphone GT-AD is an address module for displaying a building name or address.