Electronic locking devices Comparison: Deedlock, Trimec  (4)

 
Lock Type
Electromagnetic Locks
Electric Locks
--
--
Monitoring Status
Monitored
Monitored
--
Dual Monitored
Holding Force kN
1380lbs
1350 kg
15 kg
1000 kg
Magnet Type
Single Magnet
--
--
--
Mount Type
--
Surface Mount
--
Mortice Mount
Fail-Open/ Fail-Secure
--
Fail-Open
Fail-Open
Fail-Open
Door Open Type
--
Inward
--
Inward / Outward
Material
--
Stainless
--
Stainless Steel
Solenoid Bolts
--
--
--
Door Type
--
--
--
Exterior / Interior
Bolt Throw mm
--
--
--
16

Related Videos

Vaion adds object counting to the vcore update to enhance vehicle, people and object detection

Vaion releases video on how to use access control systems with Vaion vcore

'5 Minutes With' Richard Huison from Gallagher

Latest Electronic locking device case studies

Great Ormond Street Hospital relies on Alpro access control solutions
Great Ormond Street Hospital relies on Alpro access control solutions

When Great Ormond Street hospital needed to refurbish the existing entrance doors, Alpro stepped in with a pleasing aesthetic solution which was not only cost effective but was an 'off the shelf solution' ensuring no delays to the contactors were incurred, thus ensuring no disruption to the vital work the hospital carries out on a daily basis.Alpro supplied the ES8000 series V lock which overcomes the problems of alignment with double swing doors.  The unit further eliminates the need and cost of an additional key override, due the fail open motor locking mechanism.  The units can be installed on glass, steel and timber door installations and various accessories are available for the individual application in question.  Keith Parry, Alpro's Divisional Sales Manager, commented: "With this unit, Alpro have once again illustrated their commitment to excellence by offering a cost effective and speedy resolution to an egress/ingress problem.  By working with the principle stakeholders involved, Alpro were once again able to demonstrate its ability to respond to the external environment and solve problems".

Alpro Architectural Hardware protects students, staff and visitors at The University of Westminster
Alpro Architectural Hardware protects students, staff and visitors at The University of Westminster

Electric bolts from Alpro Architectural Hardware are protecting students, staff and visitors at the University of Westminster headquarters in Regent Street, London. The Alpro EB1001 is a 12 VDC stainless steel bolt and strike plate assembly with a 15mm diameter and throw. It allows remote access and exit control of most timber, metal and UPVC doors. The units offer installers optimum flexibility and can be fitted in the frame or on the door itself. A plug-in LED bolt indicator and stainless steel dress plate for covering the brushed aluminium faceplate are supplied as standard. Facilities managers can set the auto relock function for 0, 3, 6 or 9 seconds and installers can use a chromate steel surface mounting kit where required. These bolt and strike plates operate with an activating current of 1000mA and a holding current of 250mA. They feature a continuously rated solenoid and are fully protected against transient and reverse polarity. The varied installation options are designed to provide concealed high security locking on any single or double-action hinged or sliding door in timber or metal for vertical or horizontal mounting. Keith Parry, Divisional Sales Manager at Alpro, said: “Our coverage is nationwide but in the capital alone, Alpro equipment has been installed at landmarks and major infrastructure sites including Great Ormond Street Hospital, the London Eye and St Pancras International. The university’s Regent Street site has a ramped entrance and stair climbers, and the Alpro units have been installed in compliance with the Disability and Discrimination Act 2004, this being standard practice across all of the company’s operations.” The University of Westminster currently has over 20,000 students from 150 countries and is recognised for excellence in both undergraduate achievement and research work across art and design, electronic engineering and the media. The Regent Street premises have been a centre for public education since 1840. The Alpo bolts and strike plates are protecting a building which houses the Vice Chancellor’s office, the school of social sciences and the departments of humanities and languages. Former students of the University of Westminster include fashion designer Vivienne Westwood, sculptor Sir Anthony Caro and pop musician Charlie Watts.

Kings Cross and St. Pancras station reconstruction areas secured by Alpro
Kings Cross and St. Pancras station reconstruction areas secured by Alpro

During the major reconstruction and refurbishment of Kings Cross and St.Pancras stations Alpro (part of IEC, Ltd.) were called upon to supply high security access control products to compliment the developments. Alpro supplied solenoid bolts and 8 bit keypads within the development to ensure that areas not open to the public were protected at all times. The Alpro HID prox keypad is a virtually indestructible keypad with a HID reader offering the security industry the best of both worlds. Coupled with the high quality solenoid bolts the overall access control solution was completely cost effective for such a prestigious development as this. Tom Courtney, Alpro's Area Sales Manager, commented: "The client needed a speedy solution which was both high quality and cost effective. With the products supplied here, Alpro were able to achieve both aspects of the initial design brief. Another good example of Alpro's ability to solve client's problems".