DSC TL300 universal IP alarm communicator

Technical Specification

Features:

Make: DSC
Model code: TL300
Digital Communicators: Yes
Transmission Media: GSM / GPRS transmission
No of Inputs: 4

Additional info:

Compatible with most control panels that use the Contact ID format. Instant, always-on IP communication. Works over local LAN/WAN network or the Internet. 128-bit AES encryption (NIST approved). Supports DHCP (dynamic IP addresses). Low network bandwidth requirements. Compatible with 10/100BaseT networks. Reports events to 2 different re ceiver IP addresses. UL standard & encrypted line security. 4 on-board programmable zone inputs and 2 programmable voltage outputs as stand-alone module. Programmable through the PK5500 LCD keypad or T-Link Console software. Software upgrades via network. Compatible with Sur-Gard System I/II/III/IV monitoring station receivers. ULC passive or active security levels. ULC active line security levels A1-A4. 12-24 volt DC support (v1.5 and higher). Polling and hardware substitution protection. Compliant with NFPA72 Editions: 2002, 2007, 2010.

Contact manufacturer Contact manufacturer

Datasheet Datasheet

Make	DSC
Manufacturer	DSC
Category	Intruder Alarms>Intruder alarm communicators
Model code	TL300
Digital Communicators	Yes
Transmission Media	GSM / GPRS transmission
No of Inputs	4
No of Outputs	2
Electrical Specifications	Power Supply: 12 V DC
Physical Specifications	Dimensions mm: 83 x 133
Environmental Specifications	Operating Temp ^oC: 0 ~ 49 Operating Humidity %: 5 ~ 93
Additional info	Compatible with most control panels that use the Contact ID format. Instant, always-on IP communication. Works over local LAN/WAN network or the Internet. 128-bit AES encryption (NIST approved). Supports DHCP (dynamic IP addresses). Low network bandwidth requirements. Compatible with 10/100BaseT networks. Reports events to 2 different re ceiver IP addresses. UL standard & encrypted line security. 4 on-board programmable zone inputs and 2 programmable voltage outputs as stand-alone module. Programmable through the PK5500 LCD keypad or T-Link Console software. Software upgrades via network. Compatible with Sur-Gard System I/II/III/IV monitoring station receivers. ULC passive or active security levels. ULC active line security levels A1-A4. 12-24 volt DC support (v1.5 and higher). Polling and hardware substitution protection. Compliant with NFPA72 Editions: 2002, 2007, 2010.
Download PDF version Download PDF version