Altronix eBridge1PCT EoC Single Port Transceiver

Technical Specification

Features:

Make: Altronix
Model code: eBridge1PCT
Data Transceiver: Yes
No of Video Inputs: 1 channels
Dimensions mm: 64 x 25 x 97

Additional info:

Altronix eBridge1PCT EoC hardened transceiver transmits data at 25Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE-compliant format to an enabled device/camera. The eBridge receiver is available in various options and is powered by an external midspan or endspan. The receiver passes PoE power over the same coax cable to the eBridge1PCT transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate a cost-effective, simple way to replace legacy analog products with new IP devices over existing coax up to 500m. Maximum range from headend to the PoE camera/device is 700m, taking into consideration that up to 100m of structured cable may be deployed at each end.

Contact manufacturer Contact manufacturer

Datasheet Datasheet

Make	Altronix
Manufacturer	Altronix
Category	CCTV>Fibre optics, telemetry receivers, transmitters, transceivers
Model code	eBridge1PCT
Data Transceiver	Yes
No of Video Inputs	1 channels
Physical Specifications	Dimensions mm: 64 x 25 x 97 Weight g: 110
Environmental Specifications	Operating Temperature ^oC: -40 ~ +75 C (-40 ~ +167 F) Operating Humidity %: 85
Additional info	Altronix eBridge1PCT EoC hardened transceiver transmits data at 25Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE-compliant format to an enabled device/camera. The eBridge receiver is available in various options and is powered by an external midspan or endspan. The receiver passes PoE power over the same coax cable to the eBridge1PCT transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate a cost-effective, simple way to replace legacy analog products with new IP devices over existing coax up to 500m. Maximum range from headend to the PoE camera/device is 700m, taking into consideration that up to 100m of structured cable may be deployed at each end.
Download PDF version Download PDF version