Perimeter protection is one of the most effective ways to prevent an intruder. A more secure system is one that alerts the user of the presence of an intruder, before they can break into the property. It’s a simple idea, but fitting an external detector comes with challenges.  Install the brand-new XDL12TT-AM and provide up to 12m premium and robust pet-friendly external detection.  Consisting of two independent Passive Infrared (PIR) sensors and one microwave sensor, the Tri-Technology (TT) of the XDL12TT-AM utilises Tri-Signal Detection Logic to identify the presence of an intruder. This provides reliable and stable external detection as all three sensors must be activated sequentially in quick succession to create an alarm. This enhances the detector’s immunity to environmental disturbances and limits the risk of false alarms.  With Dual-Vision Pet Immune Technology, each PIR sensor of the XDL12TT-AM has its own dedicated volumetric field of view. The top PIR detects outwards and up, while the bottom PIR detects outwards and down, without overlapping. This setup, alongside Tri-Signal Detection Logic, delivers highly secure sequential detection and increases its tolerance to pet immunity.  So, should any large dogs or cats stray into the coverage plane, it would only be picked up by the bottom PIR and the microwave sensors and therefore an alarm condition would not be activated. However, the lens coverage of the PIRs are angled so that any human will be detected walking through both PIR coverage planes. Therefore, as all three sensors are activated, so would an alarm condition. This increases the detectors stability and limits the risk of false alarms.  In terms of changing conditions and swaying vegetation, the XDL12TT-AM features Anti-Sway Analytics. This advanced digital filter distinguishing between the movements of trees and plants from that of an intruder, to maintain optimum performance. The detector also boasts IP55 weatherproof rating, thick polycarbonate plastics and fully sealed optics for optimum external performance. It has even been moulded with a stabilising material to prevent discolouration over time!  The XDL12TT-WE also features Anti-Interference Technology to prevent intruders from bypassing detection. This consists of Anti-Masking, which is a Grade 3 Patented Technology that protects against any attempt to mask any of the three sensors with cardboard, duct tape, sprays, lacquers or aluminium foil.  It also consists of Anti-Blocking, which is a Grade 4 Technology that prevents the system from being armed if there is anything blocking the vision of any of the sensors. Therefore, to arm the system, whatever is blocking the detector from detecting needs to be removed first.  Providing either volumetric or curtain coverage to suit the area that needs protecting, each lens can also be masked to restrict the coverage area. This is particularly useful in areas where busy roads can cause false alarms. The detector also boasts three different frequency bands to avoid any interference (cross-talk) that can occur when two or more detectors with the same frequency band are installed within close proximity of each other. This also allows multiple to be fitted, including the use of a fixed bracket, which enables two to be fitted back to back, providing 24m range with 180° volumetric coverage.  Whatever the requirement, the XDL12TT-AM provides the ideal external security solution.

Delivers upto 1.6 km long range signalling and heightened false alarm immunity Detection range 12m Volumetric coverage 90° Consists of two independent Passive Infrared (PIR) sensors and one microwave (MW) sensor in one common housing Adjustable PIR/MW range Utilises Tri-Signal Detection Logic alongside Tri-Technology, whereby to identify the presence of an intruder, all three sensors of the detector need to be activated sequentially in quick succession to create an alarm Can provide either volumetric or curtain coverage depending on the area that needs protecting Dual-Vision Pet Immune (up to 24kg, 1m high) Secure two-way wireless technology The Instant Two-Way Device Control (ITDC) enables the instant wake-up or sleep of devices as the system is armed or disarmed Anti-Sway Analytics - An advanced filter that is designed to protect against false alarm activations in environments with windy weather conditions and swaying vegetation Blue Wave Technology (BWT) Status LED indication One-Push-To-Learn Button Signal Strength Indicators (SSI) 10.587 GHz frequency band - Avoids any interference (cross-talk) that can occur when two or more detectors with the same frequency band are installed within close proximity of each other IP55 heavy duty design Delivers advanced outdoor protection

Less mess, less fuss, simply excellent performance with two way wireless technology Longer battery life with instant two way device control (ITDC) Highly secure 868MHz Transceiver FM technology ABS plastics & sealed optics 10m pet friendly detection (up to 20kg)

Detection range 15m Consists of both Passive Infrared (PIR) and microwave (MW) sensors in one housing Both sensors need to be activated simultaneously to get an alarm condition Delivers long range coverage Anti-masking Anti-blocking Anti-cloaking Sealed optics Triple LED indication Digital temperature compensation Automatic sensitivity Independent Floating Thresholds (IFT) Creep zone protection 10.525 GHz frequency band - Avoids any interference (cross-talk) that can occur when two or more detectors with the same frequency band are installed within close proximity of each other Ideal for indoor protection

Intrusion can be very invasive, damaging and expensive for any industrial or commercial business. The damage of machinery or the theft of goods can potentially be devastating. Not only that, but each commercial and industrial property can vary dramatically in terms of the level of security required, along with the conditions of the installation. Aisles, machinery and varying environmental conditions are all considerations, as is the required function of the security system and the ability to monitor it safely and remotely. So, which security system can deliver the right solution? Look no further than the Pyronix PCX46 APP: A professional high-security hybrid solution that delivers maximum security, convenience, flexibility and potential. Tailored security for individual needs Tailor the security system to meet the individual needs of the property, with the full range of Pyronix devices. Whether wired for Grade 3 requirements (large casing PCX46 APP) or utilising the multi-award-winning two-way wireless technology for any Grade 2 requirements, you can deliver the ideal system for the property and provide the user with full assurance that they are paying for the best possible security solution. For environments such as show rooms, factories, garages, shop floors, entrances or exits, there is the Pyronix range of KX detectors, which utilise Dual Technology (DT) and offer resolute detection in areas with changing conditions. If there are any drafts or fluctuating temperatures, there is the perfect KX. There is also the XD range of external detectors that utilise Tri-Technology (TT), as well as Anti-Masking and Anti-Blocking options. These can offer any external areas the protection they need, as well as be utilised to set off lights. Whether the installation requires sensors, detectors, sirens and much more, this is all possible and easily accomplished with the PCX46 APP. PyronixCloud and HomeControl+ Utilise this security system and you can also benefit from the PyronixCloud and HomeControl+ App infrastructure. The user will obtain remote control of their system from anywhere in the world, while you benefit from remote diagnostics and programming, as well as easy set-up. The HomeControl+ App delivers unrivalled control over the property for the user, with the ability to: arm and disarm, control any automation outputs, check the status of every individual device on the system, see their event history and much much more, all in real-time. So, whether the user is at work, on holiday or in bed, they are always informed and always in control. This is particularly useful for any business owner or manager, where it may be advantageous to monitor the access to the building, as well as any automation outputs added to the system. A more profitable business solution With remote programming and diagnostics of the system using InSite UDL software via the PyronixCloud, there are less call-outs for you and therefore less costs. This makes the PCX46 APP a more profitable solution for your business, as systems can be fully managed remotely and even when a call-out is necessary, your engineer will know what the issue is before arriving at the site. Furthermore, you can also generate recurring revenue streams by offering PyronixCloud management services. 

PCX hybrid control panel  Maximum total zones 78 - 8 onboard wired inputs expandable to 78 - Expandable with up to 64 wireless zones  13 programmable wired outputs expandable to 85  8 independent areas  Arm and disarm via app, pin code, proximity tag or keyfob  Wi-Fi, LAN, GPRS, and PSTN modules available

Detection range 12m Volumetric coverage 85° Consists of both Passive Infrared (PIR) and microwave (MW) sensor in one housing Sealed Optics Can provide either volumetric or curtain coverage depending on the area that needs protecting Pet Immune Digital temperature compensation Automatic sensitivity Independent Floating Thresholds (IFT) Creep-zone protection Secure two-way wireless technology The Instant Two-Way Device Control (ITDC) enables the instant wake-up or sleep of devices as the system is armed or disarmed One-Push-To-Learn Button Signal Strength Indicators (SSI) 9.9 GHz frequency band - Avoids any interference (cross-talk) that can occur when two or more detectors with the same frequency band are installed within close proximity of each other Ideal for internal protection of rooms, offices, etc.

Detection range 12m Volumetric coverage 85° Consists of both Passive Infrared (PIR) and microwave (MW) sensor in one housing Sealed Optics Can provide either volumetric or curtain coverage depending on the area that needs protecting Pet Immune Digital temperature compensation Automatic sensitivity Independent Floating Thresholds (IFT) Creep-zone protection Secure two-way wireless technology The Instant Two-Way Device Control (ITDC) enables the instant wake-up or sleep of devices as the system is armed or disarmed One-Push-To-Learn Button Signal Strength Indicators (SSI) 10.587 GHz frequency band - Avoids any interference (cross-talk) that can occur when two or more detectors with the same frequency band are installed within close proximity of each other Ideal for internal protection of rooms, offices, etc.

The Enforcer 32WE APP is a professional high-security wireless solution that delivers maximum security, flexibility, potential and opportunities for installers and users alike. Fewer call-outs With remote programming and diagnosis of the system using InSite UDL software via the PyronixCloud, the Enforcer 32WE APP system can be checked and even amended without having to send an engineer to site. This means there are fewer call-outs for the installer, or, should an engineer still be required to go to the site, any issue can be pinpointed before their arrival, which means much greater efficiency. This makes the system a much more profitable solution for their business.  Efficient and flexible installation The initial installation is also much more efficient and flexible, utilising the PyronixCloud and two-way wireless technology. Setting up an account on the PyronixCloud avoids the difficulty of having to set up static IP, while the sheer volume of Pyronix two-way wireless peripherals with features like one-push-to-learn and signal strength indicators (SSI), alongside wired expanders, allow the installer to tailor any installation to perfectly protect any property. Property protection Users can rest assured knowing that the Enforcer 32WE APP is a superior security solution, that can meet their property needs, with simple and non-invasive fitting and expandability. Another key benefit for the user is the HomeControl+ App, which gives complete real-time control of their system from anywhere in the world. So, the system not only protects the property but provides the user with complete functionality, with remote arming and disarming, as well as control of any wired automation outputs. They can even check the status of every device on the system in real-time and much more. This is just a glimpse of what the Enforcer 32WE APP is capable of. Feature-full, expandable, efficient and easy, the Enforcer 32WE APP is truly a superior wireless security solution.

Looking for a hybrid system with the adaptability and expandability of a wireless system? The search is over!  With remote programming and diagnosis of the system via the PyronixCloud, there are less call-outs for the installer and therefore less costs with the PCX 46 APP. This makes the system a more profitable solution for the business.  Tailored installation The initial installation is also more efficient and flexible, thanks to the PyronixCloud, while the sheer volume of Pyronix peripherals available allow the installer to tailor any installation to perfectly protect any property.  Users can be assured that they are paying for a superior security solution, that can meet the individual needs of their property, with easy expandability. Utilising wired and wireless devices also makes it a less invasive system to fit, with less need to move furniture, take up carpets or drill holes.  Another key benefit is the HomeControl+ App, which gives users complete real-time control of their system from anywhere in the world: arm and disarm, control automation outputs, checking the status of every device on the system and much more.  This is just a glimpse of what the PCX46 APP is capable of. Adaptable, functional, feature-full: The PXC46 APP is the ideal security solution.

Detection range 12m Volumetric coverage 85° Consists of both Passive Infrared (PIR) and microwave (MW) sensor in one housing Sealed Optics Can provide either volumetric or curtain coverage depending on the area that needs protecting Pet Immune Digital temperature compensation Automatic sensitivity Independent Floating Thresholds (IFT) Creep-zone protection Secure two-way wireless technology The Instant Two-Way Device Control (ITDC) enables the instant wake-up or sleep of devices as the system is armed or disarmed One-Push-To-Learn Button Signal Strength Indicators (SSI) 10.525 GHz frequency band - Avoids any interference (cross-talk) that can occur when two or more detectors with the same frequency band are installed within close proximity of each other Ideal for internal protection of rooms, offices, etc.

Pyronix, the intrusion specialist of the world-leading Hikvision group, is delighted to announce the launch of the Enforcer 64 total wireless security solution.  Taking residential security to a new level, the Enforcer 64 is as quick-to-fit, easy-to-use and reliable as ever before, but features a new modern design and V12.5 firmware for Hik-Connect compatibility and dual path communication capability.  “We are absolutely committed to driving market applications towards total solutions, with the upmost attention for innovation and quality,” Laurence Kenny, Pyronix Marketing Manager, comments.  He continues: “With the Enforcer 64 we have delivered this in abundance with a complete solution that fuses security, video and lifestyle enhancements, with greater communication contingency and reassurance.”  Pyronix first introduced the Enforcer wireless control panel in 2012. Since then it has consistently won multiple coveted industry awards, due to the company’s commitment to continuous improvement and innovative technological advancements by its dedicated R&D team.  These developments have culminated in the Enforcer 64, which comes with heightened capabilities to enable security and monitoring in one solution.  The Enforcer 64 utilises Pyronix award-winning two-way wireless technology, which is now expandable to 64 wireless inputs thanks to V12.5 firmware; double the number of the previous Enforcer solution. This makes adding wireless outdoor XD detectors, indoor KX detectors, sounders, keypads or safety devices easy, to suit any installation preference, without having to compromise.  “The Pyronix Enforcer is our premier wireless solution for professional security installers and integrators, utilising the award-winning features it is renowned for within the security industry as the foundation for further development,” Laurence comments.  He continues: “We have further developed it to be expandable to 64 wireless inputs, delivering greater installation capability whilst fusing it with Hikvision’s extensive range of video equipment, iVMS via Hik-Connect for seamless functionality; all of which combine to provide a total solution.”  The panel is certified to Grade 2 and perfectly suited for residential and small to medium sized commercial applications. It also delivers for multiple installation preferences, with complete compatibility with the whole range of communication modules. The solution also boasts hybrid capabilities, with the ability to add any of the complete range of wireless and wired peripherals, alongside the ability to add up to 30 automation outputs.  The Enforcer 64 fuses intrusion and video to bring together intrusion and video on one platform for enhanced customer value and upsell opportunities.

Wall mount bracket Easy installation with cable through option

Ceiling mount bracket Easy installation with cable through option