PIR camera. Anti-static lens cleaning cloth.

Outdoor, Ceiling/wall mount, IP 65, 1.5mm Powder coated stainless steel, 4mm thick Lexan window, heater to prevent misting

The DI601-WT is a walk tester for DI601 and DDI602 series used during installation of motion sensors.

ITI TX-8010-01-1 is a designLine garage door sensor that enables users to regularly monitor the door’s opening for complete home security. The sensor will transmit an open and close signal to the panel each time the garage door is opened or closed.

The 5501 moisture detector is designed to respond to the presence of water and other nonflammable conductive liquids. The sensor units can be surface-mounted or floor-mounted beneath carpet for detection of increased moisture levels in basements and bathrooms, and leakage in air conditioning and sprinkler systems. The moisture detectors work with the 5501 Moisture Processor. Simply push the processor’s test switch to simulate the presence of water and verify proper operation. The processor accommodates up to four detectors and come with two internal lithium batteries for long-life.

ITI TX-1012-01-1 micro door/window sensor is a completely wireless sensor that detects the opening and closing of doors and windows. The sensor's compact size provides for clean-looking installations; ideal for using on drawers, safes, cabinets and just about anything that can be opened and closed.

The 5505 under-carpet sensor is designed to respond to the presence of water and other nonflammable conductive liquids. The sensor units can be surface-mounted or floor-mounted beneath carpet for detection of increased moisture levels in basements and bathrooms, and leakage in air conditioning and sprinkler systems. The moisture detectors work with the 5501 Moisture Processor. Simply push the processor’s test switch to simulate the presence of water and verify proper operation. The processor accommodates up to four detectors and come with two internal lithium batteries for long-life.

ITI 600-6520-95 is a safeair wireless carbon monoxide alarm that accurately and reliably alerts residents of potentially dangerous levels of CO in their home, and sends a CO alarm signal to any existing or legacy wireless control panel.

ITI 60-362N-10-319.5 is a crystal wireless door/window sensor that provides effective security that’s easy to set up. It also features an optimised internal antenna design to increase range performance.

Aritech DV1201A vault sensor is designed to detect attempts to break into vaults, safes, night deposit boxes, automatic teller machines (ATMs), and other reinforced physical areas such as data storage and filing cabinets. The seismic detection system reacts to the characteristic vibration patterns of all breaking and entering tools, such as hammers, drills, diamond saws, hydraulic pressure tools, and thermal tools like welding, torch, and thermal lance.

The Aritech DV1221A vault sensor is designed to detect attempts to break into vaults, safes, night deposit boxes, automatic teller machines (ATMs), and other reinforced physical areas such as data storage and filing cabinets. The seismic detection system reacts to the characteristic vibration patterns of all breaking and entering tools, such as hammers, drills, diamond saws, hydraulic pressure tools, and thermal tools like welding, torch, and thermal lance.

The DS924i Motion Sensor is a supervised, wireless sensor that detects intruders in large, open areas and can monitor multiple entry points. The sensor also includes a built-in tamper switch that causes an alarm, if an intruder attempts to remove the sensor from its mounted location.

The wireless 4-button keychain touchpad makes ITI security systems easier to use. The small but powerful touchpad acts like an electronic key. It can arm or disarm the system, activate the police or auxiliary panic alarm, and turn lights on or off from up to 500 feet away. With the Security Pro 4000, the Keychain Touchpad can also turn the Energy Saver Module on or off, make lights flash on and off, and operate a garage door opener.

EV1012PI is Aritech's mirror optic PIR motion sensors that offer a unique combination of high sensitivity detection and low false alarm rates, without the need for manual sensitivity adjustment.

ITI 6540U is a wall mount sensor with passive infrared motion that provide high value in both design and performance. It is well-suited for residential and light commercial environments with a stylish housing to complement any decor and modest budgets.

ITI 6530UCM is a ceiling mount sensor with passive infrared motion that provide high value in both design and performance. It is well-suited for residential and light commercial environments with a stylish housing to complement any decor and modest budgets.

Bringing together the functionality of the NetworX NX-8E and the reliable performance of Interlogix™ sensors, the PinPoint addressable Point ID solution is well suited for a variety of modern applications. Supporting up to 192 devices on a single two-wire loop up to two miles, this point ID solution easily installs in new construction or retro?t applications.

Aritech VE735 is a vector enhanced motion sensor that features highly advanced and sophisticated optics that provide precise detection and superior performance.

ITI 5820A-W glassbreak sensor is designed for use when sensor appearance is a consideration. The 5820A-W can be mounted directly into the wall or ceiling or can be used with the single gang box accessory. A trim ring is included.

ITI 584503-W is a shatterpro glassbreak sensor that is ideal for applications where hardwired acoustic sensors are impractical, listens for actual patterns of breaking glass using Pattern Recognition Technology.

ITI 60-886-11-95 learn mode shock sensor is an excellent first line of defense by detecting the possibility of an intrusion due to forced entry. It features a unique, advanced microcontroller.

The Sentrol 5812A Series ShatterPro™ II acoustic glassbreak sensor provides great false alarm immunity, fast installation testing, and a handclap feature that lets end-users confirm the sensor’s operational status. Using Sentrol’s patented Pattern Recognition Technology™, the sensor listens for actual patterns of breaking glass while eliminating most false alarm patterns. ShatterPro™ II sensors listen across the glassbreak frequency spectrum for greater false alarm immunity.

Aritech  RCR-50 is a  PrecisionLine dual technology sensor that offer new, easy solutions for your most challenging residential, pet, or commercial applications.

Aritech VE1120 is a vector enhanced motion sensor with PIR motion that features highly advanced and sophisticated optics that provide precise detection and superior performance.

Aritech 5812NT is a ShatterPro acoustic glassbreak sensor that feature latest breakthrough in Interlogix's advanced series of acoustic glassbreak sensors.