13.56 MHz proximity reader for connecting to access controller with Wiegand interface Supports multiple technologies (standard iCLASS, MIFARE®, and MIFARE DESFire® EV1) Proximity/long range reader with beeper and multi-coloured LED display Rugged, weatherised polycarbonate enclosure, designed to withstand harsh environments “Parking Hold” feature allows connection to a loop detector to ensure accurate detection of vehicles in parking lanes iCLASS proximity cards that work with diversified keys of 64-bit length for two-way authentication, encrypted data is transmitted between the reader and card

13.56 MHz proximity reader compatible with access controllers with Wiegand interfaces Fully compatible with the Bosch Access Management portfolio, including the Management Software Systems (BIS/ACE, AMS and APE), the Access Modular Controller (AMC2), and the MIFARE and iCLASS credential portfolio Support of multiple card technologies (iCLASS SE, iCLASS Seos, MIFARE DESFire EV1) Equipped with keypad The keypad functionality can also be used for a variety of access control features including the option to set a door to long-term open Quick reading response for high performance level The use of NFC on mobile phones to set up the communication with the reader enables mobile phones to be used as access credentials IP55 rating allows both indoor and outdoor installation

ICLASS keyfob with 256 byte data storage Fastening Slot ICLASS chip

ICLASS Adhesive Tag with 2 Kbyte data storage 16 application areas, 15 of which can be customised Tags have an embedded wire antenna and an ICLASS chip The Adhesive Tag is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS Adhesive Tags are dynamic credentials with application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code ICLASS adhesive tags with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Adhesive tags are very easy and convenient to use Reading ranges reach up to 5 cm depending on the readers used

An access control system for stand-alone application or for integration with other systems, such as the Bosch video management system BVMS or Bosch B and G series intrusion panels As a stand-alone system, it features a simple-to-use map and alarm viewer for a rapid assessment of all the devices and entrances on the site As an integrated system, it allows the operator of a video management system to perform door-related tasks like video-based ID  verification, to grant and deny access, or to disable doors Intrusion areas can be armed directly from the Map View, and intrusion panel users can be centrally managed Combines high-end access control features, performance and availability with intuitive operation Web-based visitor management Comprehensive security management: Integrates with intrusion and video systems Highly scalable Easy to configure

Class-leading reading performance with powerful quad-core CPU technology The configuration allows four different access modes for the user - Card plus Fingerprint; Card or Fingerprint; Card only; Fingerprint only Flexibility with multi-card support due to dual-frequency RFID technology Supports most types of RFID card standards with a single device including MIFARE, HID iCLASS, DESFire, HID Prox and EM Features fake fingerprint prevention technology. Using dynamic pattern, liveness feature and unnatural feature analysis, the engine blocks fake fingerprints made from various materials including clay, rubber, glue, paper, film and others Equipped with the ability to read Bosch coded Mifare credentials, ensuring a straight-forward configuration and high level of security Integration with AMS and BIS/ACE 4.5 (and later versions) for easy enrollment and configuration of fingerprint templates and card data Rugged IP67/IK09 housing for tough environment and outdoor installations

Provides a quick, hassle-free experience for visitors Supports receptionists with features that make their many tasks smooth, efficient and secure Keeps track of expected, checked-in and overdue visitors Handles even high visitor volumes as smoothly and efficiently as possible Allows hosts to easily pre-register their visitors for smoother, faster processing on the day

ICLASS Adhesive Tag with 256 byte data storage 2 application areas, one of which can be customised Tags have an embedded wire antenna and an ICLASS chip The Adhesive Tag is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS Adhesive Tags are dynamic credentials with application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code ICLASS adhesive tags with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Adhesive tags are very easy and convenient to use Reading ranges reach up to 5 cm depending on the readers used

Reader with beeper and multi-coloured LED display Wiegand output for 125 kHz card technology (EM) Indoor and outdoor mounting

ICLASS ID card with 2 Kbyte data storage 2 application areas, one of which can be customised Cards have an embedded wire antenna and an ICLASS chip The card is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS cards support multiple application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code Contactless credentials with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Reading ranges reach up to 12.5 cm depending on the readers used

Provides a quick, hassle-free experience for visitors Supports receptionists with features that make their many tasks smooth, efficient and secure Keeps track of expected, checked-in and overdue visitors Handles even high visitor volumes as smoothly and efficiently as possible Allows hosts to easily pre-register their visitors for smoother, faster processing on the day

ICLASS ID card with 2 Kbyte data storage 16 application areas, 15 of which can be customised Cards have an embedded wire antenna and an ICLASS chip The card is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS cards support multiple application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code Contactless credentials with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Reading ranges reach up to 12.5 cm depending on the readers used

Mifare DESFire EV1 ID card with 8 kByte data storage 2 application areas, one of which can be customised MIFARE cards have a wire antenna and a MIFARE Chip embedded The card is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz MIFARE cards support multiple application areas that can be individually protected The unique badge number is printed on top of the card enabling contactless reading by readers The credit card sized card conforms to the ISO-standard size enabling surface printing with conventional ISO compatible card printers Contactless credentials with MIFARE chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions The card is durable with IP68 and can be fully submerged, all the electronics are sealed inside

ICLASS ID card with 256 byte data storage 2 application areas, one of which can be customised Cards have an embedded wire antenna and an ICLASS chip The card is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS cards support multiple application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code Contactless credentials with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Reading ranges reach up to 12.5 cm depending on the readers used

An access control system for stand-alone application or for integration with other systems, such as the Bosch video management system BVMS or Bosch B and G series intrusion panels As a stand-alone system, it features a simple-to-use map and alarm viewer for a rapid assessment of all the devices and entrances on the site As an integrated system, it allows the operator of a video management system to perform door-related tasks like video-based ID  verification, to grant and deny access, or to disable doors Intrusion areas can be armed directly from the Map View, and intrusion panel users can be centrally managed Combines high-end access control features, performance and availability with intuitive operation Web-based visitor management Comprehensive security management: Integrates with intrusion and video systems Highly scalable Easy to configure

ICLASS Adhesive Tag with 2 Kbyte data storage 2 application areas, one of which can be customised Tags have an embedded wire antenna and an ICLASS chip The Adhesive Tag is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz ICLASS Adhesive Tags are dynamic credentials with application areas that can be individually protected All credentials have a unique chip number and a customer (or facility) code ICLASS adhesive tags with an iClass chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Adhesive tags are very easy and convenient to use Reading ranges reach up to 5 cm depending on the readers used

An access control system for stand-alone application or for integration with other systems, such as the Bosch video management system BVMS or Bosch B and G series intrusion panels As a stand-alone system, it features a simple-to-use map and alarm viewer for a rapid assessment of all the devices and entrances on the site As an integrated system, it allows the operator of a video management system to perform door-related tasks like video-based ID  verification, to grant and deny access, or to disable doors Intrusion areas can be armed directly from the Map View, and intrusion panel users can be centrally managed Combines high-end access control features, performance and availability with intuitive operation Web-based visitor management Comprehensive security management: Integrates with intrusion and video systems Highly scalable Easy to configure

PROX ISO cards have an antenna and PROX chip embedded The card is recognised and read when held in front of the reader The reading process is passive with a frequency of 125 kHz PROX cards are static credentials with a unique card number and a customer (or facility) number Contactless credentials with a PROX chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Reading ranges reach up to 12.5 cm depending on the readers used

Stand-alone deployment, with own map viewer and alarm & event viewer, or as integral part of a video management system (e.g. BVMS) Combines high-end access control features, performance and availability with intuitive operation Highly scalable Easy to configure Situation always under control for doors, elevators, car parks and visitors, with alarm list and for different threat scenarios Centralised user and event management of intrusion panels Comprehensive security management: Integrates with intrusion and video systems Robust and Secure: Multi-level architecture for system reliability, comprehensive data security and privacy protection

MIFARE Classic ID card with 1 kByte data storage 2 application areas, one of which can be customised MIFARE cards have a wire antenna and a MIFARE Chip embedded The card is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz The credit card sized card conforms to the ISO-standard size enabling surface printing with conventional ISO compatible card printers MIFARE cards support multiple application areas that can be individually protected The unique badge number is printed on top of the card enabling contactless reading by readers Contactless credentials with MIFARE chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions The card is durable with IP68 and can be fully submerged, all the electronics are sealed inside

An access control system for stand-alone application or for integration with other systems, such as the Bosch video management system BVMS or Bosch B and G series intrusion panels As a stand-alone system, it features a simple-to-use map and alarm viewer for a rapid assessment of all the devices and entrances on the site As an integrated system, it allows the operator of a video management system to perform door-related tasks like video-based ID  verification, to grant and deny access, or to disable doors Intrusion areas can be armed directly from the Map View, and intrusion panel users can be centrally managed Combines high-end access control features, performance and availability with intuitive operation Web-based visitor management Comprehensive security management: Integrates with intrusion and video systems Highly scalable Easy to configure Easy to use: Intuitive GUI for maps and alarm viewer

Request-to-exit button with key icon Flush mount To open the door from the inside, if access is only being monitored from one side

MIFARE Classic ID keyfob with 1 kByte data storage 2 application areas, one of which can be customised MIFARE keyfobs have an embedded antenna and MIFARE chip The keyfob is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz MIFARE keyfobs support multiple application areas that can be individually protected The unique badge number is printed on top of the keyfob Contactless credentials with MIFARE chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions

Stand-alone deployment, with own map viewer and alarm & event viewer, or as integral part of a video management system (e.g. BVMS) Combines high-end access control features, performance and availability with intuitive operation Highly scalable Easy to configure Situation always under control for doors, elevators, car parks and visitors, with alarm list and for different threat scenarios Centralised user and event management of intrusion panels Comprehensive security management: Integrates with intrusion and video systems Robust and Secure: Multi-level architecture for system reliability, comprehensive data security and privacy protection

Distributed access control system with graphical alarm management Seamless integration and interaction with video, fire, intrusion and PA/VA systems via the common BIS platform High resilience thanks to a 4-tier system architecture and redundancy of critical components Integration of third-party products via open and secure protocols and SDK Efficient enrollment process that makes onboarding faster and more secure

An access control system for stand-alone application or for integration with other systems, such as the Bosch video management system BVMS or Bosch B and G series intrusion panels As a stand-alone system, it features a simple-to-use map and alarm viewer for a rapid assessment of all the devices and entrances on the site As an integrated system, it allows the operator of a video management system to perform door-related tasks like video-based ID  verification, to grant and deny access, or to disable doors Intrusion areas can be armed directly from the Map View, and intrusion panel users can be centrally managed Combines high-end access control features, performance and availability with intuitive operation Web-based visitor management Comprehensive security management: Integrates with intrusion and video systems Highly scalable Easy to configure Easy to use: Intuitive GUI for maps and alarm viewer

Compact access terminal (surface-mounted) with reader unit for proximity cards and keypad for PIN code entry and configuration Self-sufficient operation Transaction memory for a maximum of 1000 transactions; transaction consists of personal ID, time, date and type of transaction Maximum of 2000 personal IDs Configurable PIN code block after a specified number of incorrect entries Quick personal activation by showing card Alarm via auxiliary relay It is possible to connect it to an access controller via the Wiegand interface

Stand-alone deployment, with own map viewer and alarm & event viewer, or as integral part of a video management system (e.g. BVMS) Combines high-end access control features, performance and availability with intuitive operation Highly scalable Easy to configure Situation always under control for doors, elevators, car parks and visitors, with alarm list and for different threat scenarios Centralised user and event management of intrusion panels Comprehensive security management: Integrates with intrusion and video systems Robust and Secure: Multi-level architecture for system reliability, comprehensive data security and privacy protection