Axis Communications Indoor Security

Designed for fixed dome cameras Connect to power and data quickly and easily with the built-in RJ45 cable and connection Designed to be impact- and weather-resistant, it is suitable for all environments both indoors and outdoors

For outdoors and indoors Robust and safe installation Support for Axis PTZ domes and fixed domes with 1.5” NPS thread Flexible length, up to 5 m (197 in) with extension pipes Swivel action with a ±45° pivot angle

A UL-certified power supply for use in hazardous locations Premounted with fuses, terminals, RJ45 coupler and 115/230 V AC transformer, which provides 24 V AC for explosion-protected cameras To enhance security and ease-of-installation, the power supply has three open 3/4" NPT cable entries for cable conduits The operating temperature ranges from -40 °C to 55 °C (-40 °F to 131 °F)

Suitable for all Axis fixed dome cameras compatible with 1.5” NPS threaded Axis pendant kits Can be used in both indoor and outdoor environments Intended for poles with a diameter between 65–165 mm (2 1/2–6 1/2 in), and also for beams Features 3/4" conduit side entries for protected cable runs, and a closed back with cable gasket for protection against insect infestation Impact-resistant to prevent vandalism

Marine-grade stainless steel (SS 316L) High corrosion resistance against salt water and chemicals Indoor and outdoor pole mounting Suitable for stainless steel fixed domes cameras

Marine-grade stainless steel (SS 316L) High corrosion resistance against salt water and chemicals Indoor pendant mounting Suitable for stainless steel fixed domes cameras

An aluminium wall mount with a 1.5″ NPS thread Compatible with Axis fixed dome pendant kits and Axis ACI 3/4” conduit adapters The cables can be routed through the back hole, or from the side by using a conduit connection Includes AXIS T91A6 Pipe Seal Indoor and outdoor use Robust and safe installation Vandal resistance with IK10

Designed for Axis PTZ and multi-sensor cameras Flexible installation using the IDC connector Built-in IP66 RJ45 connector Suitable for wall and pole mounting- Protection against impact, water, dust and corrosion

An aluminium parapet mount, which includes AXIS T94A01D Pendant Kit (only used in combination with PTZ cameras) and AXIS T91A6 Pipe Seal Also compatible with Axis pendant kits with 1.5” NPS inner thread, and Axis ACI 3/4” conduit adapters The cables can be routed through the back, or from the side by using a conduit connection For indoor and outdoor use Vandal resistance with IK10

Enables sleek, elegant and discreet recessed ceiling installations together with AXIS M5525-E PTZ network camera Suitable for air-handling spaces in indoor installations as the back box is made of metal and has a 3/4” (M25) hole for protected cable-runs in conduits Indoor and outdoor use

Designed for both indoor and outdoor use Available in two versions with different lengths of marine-grade (SS316L) stainless steel straps One version for poles with diameter between 50–150 mm (2–6 in), and one for poles with diameter between 100-410 mm (4–16 in) in diameter Compatible with Axis fixed dome or fixed bullet cameras

An aluminium wall mount suitable for Axis positioning cameras and positioning units Compatible with Axis ACI 3/4” conduit adapters, and offers six cable entries Cables can be routed through the back or, by using a conduit connection, from each side or from the bottom For indoor and outdoor use Impact-resistant (IK10)

For outdoors and indoors Robust and safe installation Support for Axis PTZ domes and fixed domes with 1.5” NPS thread Flexible length, up to 5 m (197 in) with extension pipes Swivel action with a ±45° pivot angle

Designed for PTZ and multi-sensor cameras Room for connectivity devices, midspans (not included) and service loop Protection against impacts, water, dust and corrosion Pre-mounted IP66 RJ45 connector Re-use existing holes

Cost-effective mount for Axis fixed dome cameras Recessed ceiling installation made quick and easy Enables sleek and discreet video surveillance

Designed for discreet installation in drop and overhang ceilings Compatible with the bullet cameras from AXIS M20 Network Camera Series Applicable for indoor environments as well as outdoor use in soffits Also suitable for installation in air-handling (plenum) spaces as the enclosure is made of metal alloy with a 1/2” (M20) conduit hole for protected cable routing

Ideal for retail and commercial environments, where a fixed dome or a fixed box camera need to be installed under high ceilings The telescopic functionality allows the installer to easily and securely adjust the length of extension between 1m/3.2ft to 1.8m/6ft at 10 cm/4” intervals The base of the telescopic mount is compatible with AXIS T94F01P Conduit Back Box for a safe cabling through 1/2” (M20) conduit pipes The lightweight and robust ceiling mount can also be installed horizontally on walls when secured with AXIS Safety Wire Suitable for indoor use Compatible with Axis pendant kits and camera holders with 3/4” conduit interface

Aluminium wall mount compatible with all Axis outdoor fixed box cameras and housings IK10-rated, offers protection against impact and vandal acts Corrosion resistant according to NEMA 4X rating

Made for parapet and wall installations when the requirement is to place the camera further out from the wall Its ability to swivel 180 degrees on its own axis, allows for easy and safe mounting/maintenance of the camera from a rooftop Intended for outdoor fixed and PTZ dome cameras supporting 1.5” NPS thread Corrosion protected

Enables sleek, elegant and discreet recessed ceiling installations of indoor Axis fixed dome cameras Features a single-screw ceiling attachment design, which makes the installation quick and easy without having to remove the ceiling tile Axis fixed dome camera attached to the recessed mount is embedded into the ceiling, revealing only the camera dome and the low-profile cover ring

Designed to perfectly match AXIS M1124/M1125 Network Cameras Features IP66 protection rating against the ingress of dust and high pressure water jets from any direction as well as IK10 impact protection The housing is prepared for Power over Ethernet connection and comes with a ball joint wall mount bracket with an internal cable channel for tamper protection

8 MP, 360° multidirectional camera, with one IP address 360° IR illumination and remote zoom and focus Axis Lightfinder and Forensic WDR Flexible positioning of four varifocal camera heads Axis Zipstream for reduced bandwidth and storage needs

Indoor mount for drop ceiling installations Comes with a single-screw ceiling attachment for quick and easy installation Enables sleek, elegant and discreet recessed ceiling installations of Axis indoor cameras Compatible with AXIS M42 series and AXIS Companion Dome mini LE

Aluminium ceiling bracket for Axis PTZ cameras and AXIS Q37 Series for indoor or outdoor use 3/4" conduit hole on the side

Designed for discreet installation in drop and overhang ceilings Compatible with AXIS P32-VE/-LVE, AXIS P33-VE/-LVE and AXIS Q35-VE/-LVE network camera models Applicable for indoor environments as well as outdoor use in soffits Also suitable for installation in air-handling (plenum) spaces as the enclosure is made of metal alloy with a 3/4“ (M25) conduit hole for protected cable routing

Aluminium corner mount for indoor and outdoor use Compatible with AXIS fixed cameras, thermal cameras, PTZ cameras, and fixed dome cameras

Protects Axis fixed network camera in adverse conditions An internal shell stores heat in cold environments, and fan ventilation transfers excess heat to the outer chassis for efficient cooling in hot environments Arctic Temperature Control ensures that the camera can start up even at -40 °C (-40 °F) following a power failure One-cable installation with Power over Ethernet or High Power over Ethernet connection IP66- and NEMA 4X-rated against the ingress of dust, rain, high pressure water jets and damage from external ice formation Also IK10-rated for protection against impact and vandal acts

Protects Axis fixed network camera in environments where temperature management is not a demand, such as subways or shopping malls No power connection is required IP66- and NEMA 4X-rated against the ingress of dust, rain, high-pressure water jets and damage from external ice formation Also IK10-rated for protection against impact and vandal acts The network cable is protected inside the wall mount to enhance vandal protection Comes with a wall mount with an internal cable channel and ball joint