Alpro's backlit stand alone single door keypad provides the ultimate solution for high traffic access control, single door stand-alone installations. The keypad withstands harsh environmental conditions, providing reliable performance at all times. The built in illumination allows for use of the keypad in locations that are primarily dark.

24v DC ANSI monitored complete with SS short/long faceplate and 25mm extension lip Fail Open/PTL For use in metal and timber applications Has a 35mm deep, compact stainless steel body design Low current consumption

12vDC ANSI PTL fail secure complete with SS short/long faceplate & 25mm extension lip

12vDC ANSI PTL fail open complete with SS short/long faceplate & 25mm extension lip

12 - 24 V DC Deadlocking bolt - 38mm with wide faceplate including short strike plate and square hole Fail Secure - Power to Open Incorporates the latest design innovations to be applied to the manufacture of a transverse action Deadlocking Solenoid Bolt Offers the highest level of security, quality electronic ingenuity but with increased strength primarily achieved by utilising a larger diameter bolt pin The advanced microprocessor module provides power reduction allowing for continuous operation without heat generation as well as automatic voltage regulation, dual monitoring and access control features Can be connected to advanced access control systems where logging and traffic reports are important, making it the ideal solution for centrally controlled buildings Provides feedback of both door and bolt positions which can be used in conjunction with a the security and access systems to fully monitor and control movement

12 - 24 V DC Deadlocking bolt - 38mm with wide faceplate including strike plate and square hole Fail Open - Power to Lock Incorporates the latest design innovations to be applied to the manufacture of a transverse action Deadlocking Solenoid Bolt Offers the highest level of security, quality electronic ingenuity but with increased strength primarily achieved by utilising a larger diameter bolt pin The advanced microprocessor module provides power reduction allowing for continuous operation without heat generation as well as automatic voltage regulation, dual monitoring and access control features Can be connected to advanced access control systems where logging and traffic reports are important, making it the ideal solution for centrally controlled buildings Provides feedback of both door and bolt positions which can be used in conjunction with a the security and access systems to fully monitor and control movement

Holding Force - 1500kg High Physical Security Releases under Side Load Pressure Dual Monitoring Magnets fitted with EW pressure sensors are able to send an alarm before access forced open. Also fitted with buzzer.

A monitored double magnet that can be used to facilitate access and exit control systems for a variety of aluminium, timber and steel doors Maintains a holding force of 1020kgs, offers low maintenance and ease of installation Provides positive fail safe operation (unless battery back up is available) at all times Suitable for both inward and outward opening doors

A monitored mini magnet that can be used to facilitate access and exit control systems for a variety of aluminium, timber and steel doors Maintains a holding force of 500kgs, offers low maintenance and ease of installation Provides positive fail safe operation (unless battery back up is available) at all times Suitable for both inward and outward opening doors

A monitored mini magnet that can be used to facilitate access and exit control systems for a variety of aluminium, timber and steel doors Maintains a holding force of 250kgs (550lbs), offers low maintenance and ease of installation Provides positive fail safe operation (unless battery back up is available) at all times Suitable for both inward and outward opening doors

Holding Force - 1000kg High Physical Security Automatic misalignment correction Side Load Release Dual Monitoring

A non monitored double magnet that can be used to facilitate access and exit control systems for a variety of aluminium, timber and steel doors Maintains a holding force of 1020kgs, offers low maintenance and ease of installation Provides positive fail safe operation (unless battery back up is available) at all times Suitable for both inward and outward opening doors

Holding Force - 1000kg High Physical Security Automatic misalignment correction Side Load Release Dual Monitoring

A monitored magnet that can be used to facilitate access and exit control systems for a variety of aluminium, timber and steel doors Maintains a holding force of 510kgs (1120lbs), offers low maintenance and ease of installation Provides positive fail safe operation (unless battery back up is available) at all times Suitable for both inward and outward opening doors

Holding Force - 1000kg High Physical Security Robust construction Designed to provide concealed high security locking on any single or double action, hinged or sliding door in timber or metal for vertical or horizontal mounting Triple Monitoring - bolt, door and key position switches  An advanced microprocessor module provides power reduction allowing continuous operation without heat generation Built-in Access Control module

Holding Force - 1000kg High Physical Security Robust construction Designed to provide concealed high security locking on any single or double action, hinged or sliding door in timber or metal for vertical or horizontal mounting Triple Monitoring - bolt, door and key position switches  An advanced microprocessor module provides power reduction allowing continuous operation without heat generation Built-in Access Control module

Holding Force - 1000kg High Physical Security Robust construction Designed to provide concealed high security locking on any single or double action, hinged or sliding door in timber or metal for vertical or horizontal mounting Dual Monitoring - bolt and door position switches An advanced microprocessor module provides power reduction allowing continuous operation without heat generation Built-in Access Control module

The Alpro EB1001 Electric Bolt allows for remote access and exit control of most timber, metal and UPVC Doors. It is suitable for sliding or swing, single and double action operations. It can be fitted in the frame or in the door and comes with plug in LED Bolt indicator as standard.

Shear Holding Force - 1200kg Built in PCB controller with switch selectable features and plug in 3 metre flying leads Fully Monitored Hall Effect Single or Double Action Doors One surface mount housing

Holding Force - 1000kg High Physical Security Robust Construction Designed to provide concealed high security locking on any single or double action, swing or sliding door in timber or metal for vertical or horizontal mounting Triple Monitoring - bolt, door and key position switches Auto relock function Multiple voltage input

Alpro Europrofile cylinders are available in a variety of types, sizes and finishes and are used to operate different types of deadlocks and deadlatches. When ‘changing the lock’ you often only need to change the cylinder.  These europrofile cylinders and thumbturns can also be used with a wide variety of other locks available within the marketplace.

Alpro 5229 is a round mortice cylinder keyed to pass.

Round mortice cylinder - trim ring 1.5mm thick

Double Europrofile cylinder 60mm (KA set 2) - keyed to pass

Key and thumbturn Euro cylinder 60mm (KA set 2) - keyed to pass

Half Europrofile cylinder 30mm (KA set 1) - keyed to differ

Half Europrofile cylinder 30mm (KA set 2) - keyed to pass

Alpro 5227 is a self adhesive escutcheon.