A wireless module for connecting third-party wired detectors and devices to the Ajax security system It transmits alarms and notifies of the external detector's tamper activation Can be used for connecting panic and medical buttons, indoor and outdoor motion detectors, opening, vibration, breaking, fire, gas, leakage and other wired detectors The type of alarm can be configured in the Transmitter settings. The text of notifications about alarms and events, as well as event codes transmitted to the Central Monitoring Station of the security company (CMS), depend on the selected alarm type : Intrusion alarm, Fire alarm, Medical alarm, Panic button, Gas concentration alarm Has two pairs of wired zones: alarm and tamper Runs on batteries and can supply power to the connected detector

Wireless opening detector that notifies of first signs of room intrusion by means of a broken door or window. It can be mounted on all types of doors including a metal base. Principle of operation The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub. Features The device consists of two modules — detector and magnet. The set includes two magnets: the big magnet is installed at a distance of up to 2 cm, and the small magnet up to 1 cm. Installation and set up Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Wireless door and window opening detector with shock and tilt sensors designed for indoor use. It notifies of first signs of intrusion into the room through the door or window. It is installed even on roof windows which can be left open when leaving the house. Principle of operation The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub. Features  The device protects even windows left open for ventilation. The accelerometer registers changes in vertical slope angle, bangs or vibration and sends an alarm to the hub. Installation and set up Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Receiver module for connecting Ajax detectors to wired and hybrid security systems. The device is integrated into any central unit with wired security areas. Principle of operation When the detector activates, the device closes or opens the transistor outputs. The wired central unit records the event and raises an alarm. Features The device allows setting up the detector, performing radio communication tests and detection areas tests using PC. Installation and set up The device is installed in the body of the wired central unit, in sealed cases or plastic boxes.

Wireless motion detector that notifies the owner of the first signs of home or office intrusion. The detector is fastened to the wall in front of the doors and other places likely of intruder entry. Principle of operation The device detects human presence by IR level using a passive IR sensor. The data received is digitally processed in order to prevent false alarms. Features The device automatically increases or decreases the sensor sensitivity in order to accurately detect motion during hot and cold weather. Installation and set up Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Wireless outdoor siren that notifies of danger using sound and light. The device is installed outside the room to raise an alarm for everyone to hear. Principle of operation The device notifies of detector activation with an audible alarm and LED. Sound level and alarm length are set in the mobile application. Features The device has IP54 dust and moisture protection. 12 V DC external power supply can be connected, if necessary. The built-in accelerometer will raise the alarm if an attempt is made to remove the siren. Installation and set up Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the siren. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Small wireless detector that notifies of glass being broken by intruders. It is installed at a distance of 9 m from the window and filters events that cause false alarms about breakage. Principle of operation Detects broken glass using an electret microphone, which registers the sound of impact against the glass and of the glass falling. Features Two-factor detection of broken glass prevents false alarms caused by thunder, dogs barking and noise from passing trucks. Installation and set up Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Wireless indoor siren that loudly notifies of an alarm during detector activation. It is installed indoors to warn of danger or deter intruders. Principle of operation The device notifies of detector activation with an audible alarm. Sound level and alarm length are set in the mobile application. Features Connector for external LED is available. It can be mounted outside your apartment or office to monitor the security system status. Installation and set up Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the siren. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes

Compatibility with third-party security systems An external antenna connection support Two-way encrypted communication with Ajax devices at the range of up to 2,000 m in an open space Block cipher encryption of data, frequency hopping, and device authentication during each contact with Ajax devices prevent the signals and equipment forgery

Wireless combined motion and glass break detector. The device helps to secure the room from intruders entering through doors and windows, and monitors the current state of the glass. Principle of operation The device combines the functions of two detectors — motion detector and glass break detector. It detects motion in the room at a distance of up to 12 m and registers broken glass at a distance of up to 9 m from the window. Features The device detects motion even in hot climates by means of temperature compensation. It filters false alarms caused by thunder, dogs barking or the sound of passing trucks. Installation and set up Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes

Wireless outdoor motion detector with intelligent protection against false alarms. The device operates at low temperatures and is protected against dust and splashes. Accurately detects people LISA turns MotionProtect Outdoor into a formidable barrier for intruders. The digital algorithm accurately identifies the movement of a person while ignoring animals, swaying of trees and plants as well as birds and insects that land on the detector. Prevents intrusions invisible with the naked eye The MotionProtect Outdoor features the maximum possible protection for outdoor detectors. The anti-masking function, which in on around the clock by default, detects installation of barriers, pasting over, application of paint or transparent coating on one or two lenses. The integrated tamper alarms if the dust- and moisture-proof detector body is opened. Grade 3 anti-masking Detects painting and pasting of the detector Protection against unauthorized opening Ready to operate straight out the box MotionProtect Outdoor comes with pre-installed battery, so you do not need to disassemble it. The detector can be connected to the hub by one click in the mobile application. It can be mounted at a height of 0.8 to 1.3 meters on the SmartBracket in just a few minutes. Although the complete battery life is 5 years, it is possible to connect external power supply.

Wireless motion detector with microwave sensor that notifies the owner of first signs of home or office intrusion Designed for rooms with air conditioners, fireplaces and where there is a likelihood of light flickering, glare and reflections Detects human presence by temperature difference with background thermal radiation The microwave sensor prevents false alarms caused by complex interference Detects movement at a distance of up to 12 m Alarm is transmitted within 0.15 s Pet immunity Temperature Compensation Two-way encrypted communication with the control panel at the range of up to 1,700 m Multilevel anti-sabotage protection Ready to operate straight out the box The battery is already installed inside, therefore there is no need to disassemble the detector It can be mounted in just a few minutes using the SmartBracket mount