- Technical spec
Vigitron Vi1003M | |||||||||||||
| |||||||||||||
| |||||||||||||
| Brand | Vigitron | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model Code | Vi1003M | ||||||||||||
| Transmission Media | Hard Wired | ||||||||||||
| TX/RX | TX | ||||||||||||
| Signal Mode | PAL, NTSC | ||||||||||||
| Bandwidth MHz | 10 | ||||||||||||
| Cross Talk dB | 60 | ||||||||||||
| Physical Specifications | Weight g: 7 Dimensions mm: 47 x 13.6 | ||||||||||||
| Environmental Specifications | Operating Temp oC: -10 ~ +70 Operating Humidity %: 0 ~ 95 | ||||||||||||
| Video Signal V, ohms | 75 | ||||||||||||
| Model Info | The Vigitron VB1001F and VB1001M are passive transmission devices that transport video or PTZ (pan/tilt/zoom) signals over unshielded twisted pair wires, point-to-point, for distances up to 1000 feet* (305m). Distances up to 3000 feet (1000m) can be achieved when it is used with Vigitron active UTP receivers. They use category 2-5 twisted pair wires and do not require power. Their design allows mounting directly to the video source or receiver without additional cabling. The VB1001F and VB1001M are compatible with all qualified cameras with a built-in twisted pair transmitters. | ||||||||||||
See comparison of Vigitron Vi1003M with similar Vigitron CCTV transmission systems
Compare Vigitron Vi1003M with CCTV transmission systems from other manufacturers
Technologies
Top CCTV equipment categories
- Dome cameras (1,678)
- CCTV cameras (1,448)
- CCTV camera lenses (1,334)
- Digital video recorders (DVRs) (1,318)
- IP cameras (627)
- CCTV camera lighting (532)
- CCTV camera housings (505)
- CCTV software (441)
- CCTV monitors (344)
- Video servers (341)
