The DX2000 Series DVR can record video based on scheduled settings in continuous, motion detection, or alarm modes. The DX2000 Series DVR was engineered for complete remote operation utilizing TCP/IP network (LAN/WAN/Internet) or PSTN phone line connections. The system is operated or programmed (depending on password level) through the Web browser interface installed on your PC, positioned in close proximity to the DX2000 or located halfway around the world.
| Make | Pelco |
|---|---|
| Manufacturer | Pelco, Inc |
| Model code | DX2016-080 |
| Series | DX2000 Series |
| Channels | 16 channels |
| Recording Mode | Timelapse / Event recording |
| Monitor Outputs | 1 |
| Inbuilt Multiplexer | Yes |
| Multiplexer Type | Duplex |
| Storage Capacity GB | 80 GB storage |
| Image per second (IPS) | 16 fps storage rate |
| Compression Type | Wavelet |
| Resolution | 720 x 240 resolution |
| Signal Mode | PAL / NTSC |
| Recording System | HDD |
| Mount type | 16 in, 1 out |
| Network Type | TCP/IP, PSTN |
| IP Ready | PTZ |
| Physical Specifications |
Dimensions mm: 140 x 483 x 498 Weight kg: 12 kg |
| Electrical Specifications | Power Consumption: 200 |
| Environmental Specifications |
Operating Temp oC: 5 ~ 40 Operating Humidity %: 80% |
| Additional info | The DX2000 Series DVR can record video based on scheduled settings in continuous, motion detection, or alarm modes. The DX2000 Series DVR was engineered for complete remote operation utilizing TCP/IP network (LAN/WAN/Internet) or PSTN phone line connections. The system is operated or programmed (depending on password level) through the Web browser interface installed on your PC, positioned in close proximity to the DX2000 or located halfway around the world. |